1. Chapter 2: ATOMS, MOLECULES, AND IONS

2. 4 Before 16th Century –Greeks: 4 fundamental substances: fire, earth, water, and air. –Alchemy: Attempts (scientific or otherwise) to change cheap metals into gold. 4 17th Century –Robert Boyle: First “chemist” to perform quantitative experiments to measure the relationship between pressure and volume. Define chemical elements: substance cannot further break down. 4 18th Century –George Stahl: Phlogiston flows out of a burning material. –Joseph Priestley: Discovers oxygen gas, “dephlogisticated air.” “The Priestley Award” of Am. Chem. Soc. The Early History of Chemistry

3. Law of Conservation of Mass 4 Discovered by Antoine Lavoisier 4 Combustion involves oxygen, not phlogiston 4 Mass is neither created nor destroyed In 1789 Lavoisier published the 1 st modern chem. textbook: “ Elementary Treatise on chemistry ”

4. Other Fundamental Chemical Laws 4 A given compound always contains exactly the same proportion of elements by mass. 4 Copper carbonate is always 5.3 parts Cu to 4 parts O to 1 part C (by mass). Law of Definite Proportion (Joseph Proust)

5. Other Fundamental Chemical Laws 4 Mass of O that contributes with 1 g of C 4 ----------------------------------------------------------------------------- 4 Compound 11.33 g 4 Compound II2.66 g 4 When two elements form a series of compounds, the ratios of the masses of the second element that combine with 1 gram of the first element can always be reduced to small whole numbers.  The ratio of the masses of oxygen in CO 2 and CO will be a small whole number (“2”). Law of Multiple Proportions (by John Dalton)

6. Dalton ’ s Atomic Theory (1808) ÊEach element is made up of tiny particles called atoms. ËThe atoms of a given element are identical; the atoms of different elements are different in some fundamental way or ways.

7. Dalton ’ s Atomic Theory (continued) ÌChemical compounds are formed when atoms combine with each other. A given compound always has the same relative numbers and types of atoms. ÍChemical reactions involve reorganization of the atoms - changes in the way they are bound together. The atoms themselves are not changed in a chemical reaction.

8. Figure 2.4: A representation of some of Gay-Lussac's experimental results on combining gas volumes.

9. Avogadro ’ s Hypothesis (1811) 5 liters of oxygen 5 liters of nitrogen Same number of particles! At the same temperature and pressure, equal volumes of different gases contain the same number of particles.

10. Figure 2.5: A representation of combining gases at the molecular level. The spheres represent atoms in the molecules.

11. Early Experiments to Characterize the Atom H J. J. Thomson - postulated the existence of electrons using cathode ray tubes. H Ernest Rutherford - explained the nuclear atom, containing a dense nucleus with electrons traveling around the nucleus at a large distance.

12. Figure 2.7 A Cathode-Ray Tube

13. Figure 2.7: A cathode-ray tube. The fast- moving electrons excite the gas in the tube, causing a glow between the electrodes.

14. Figure 2.8: Deflection of cathode rays by an applied electric field.

15. Figure 2.9: The plum pudding model of the atom.

16. Figure 2.10: A schematic representation of the apparatus Millikan used to determine the charge on the electron.

17. Figure 2.12: Rutherford's experiment on  -particle bombardment of metal foil.

18. Figure 2.13: (a) The expected results of the metal foil experiment if Thomson's model were correct. (b)Actual results.

19. Figure 2.14: A nuclear atom viewed in cross section. Note that this drawing is not to scale.

20. Atomic Nucleus

22. Figure 2.15: Two isotopes of sodium. Both have eleven protons and eleven electrons, but they differ in the number of neutrons in their nuclei.

23. Figure 2.16: The structural formula for methane.

24. Figure 2.17: Space-filling model of methane. This type of model shows both the relative sizes of the atoms in the molecule and their spatial relationships.

25. Figure 2.18: Ball-and-stick model of methane.

26. Figure 2.19: Sodium metal reacts with chlorine gas to form solid sodium chloride.

27. Figure 2.20: Ball-and-stick models of the ammonium ion and the nitrate ion.

28. Figure 2.21: The Periodic Table.

32. Crystals of copper(II) sulfate.

33. Various chromium compounds dissolved in water. From left to right; CrCl 2, K 2 Cr 2 O 7, Cr(NO 3 ) 3, CrCl 3, K 2 CrO 4.

34. Figure 2.22: The common cations and anions

37. Figure 2.23: A flowchart for naming binary compounds.

38. Figure 2.24: Overall strategy for naming chemical compounds.

41. Figure 2.25: A flowchart for naming acids. An acid is best considered as one or more H+ ions attached to an anion.

42. Room Temperature Ionic Liquids 室溫離子液體 (pp 520) Room Temperature Ionic Liquids 室溫離子液體 (pp 520)

43. Pure Appl. Chem., 2000, 72, 2275–2287

44. RTIL Structures Cations Anions –PF 6 - SbF 6 - –BF 4 - CF 3 SO 3 - (TfO) –Cl - N(CF 3 SO 2 ) 2 - (NTf 2 ) 1-butyl-3-methylimidazolium, BMIM, C 4 MIM R: methyl; R ’ : n-butyl 1-butyl-3- methylimidazolium hexafluorophosphate [BMIM][PF 6 ]

45. Effect of the nature of anion on physical properties of BMIM salt ----------------------------------------------------------------------------------- Anionm.p. d Viscosity Conductivity o C g/cm 3 cP (20 o C) S/m ---------------------------------------------------------------------------------- BF 4 - -82(g) 1.17 233 0.17 PF 6 - -8 1.36 312 0.14 Cl - 65 1.10 solid solid CF 3 COO - ~-40(g) 1.21 73 0.32 CF 3 SO 3 - 16 1.29 90 0.37 (CF 3 SO 2 )N - -4 1.43 52 0.39 C 3 F 7 COO - ~-40(g) 1.33 1820.10 C 4 F 9 SO 3 - 20 1.47 373 0.045 ---------------------------------------------------------------------------------- (g) Glass transition P.S. viscosity of water 1 cP.

46. What is a Room Temperature Ionic Liquid? (Room Temperature Molten Salt) Liquid salt consisting of at least one organic component (cation or anion) Room temperature ionic liquid (RTIL) with melting point is below room temperature Properties: –Negligible vapor pressure –High thermal stability (~250-400°C) –High viscosity –Hydrophobic or hydrophilic –Dissolve many organic, organometallic, and inorganic compounds RTILs are regarding as “ Green solvents ”