1. Connecting a Ventilator to a Philips Cardiac Monitor

2. One VueLink Module is in Every Room in 5N,5E,and 5SE. Leave Module In Room.

3. Cables are kept in the Watermelon Room

4. Cables are kept in the Watermelon Room Each vent has its own unique cable

5. Each vent has its own unique cable Servo Cable

6. Each vent has its own unique cable Nellcor Puritan Bennett 840 Cable

7. Choose Appropriate Cable and Plug Into Ventilator Top Connection

8. Choose Appropriate Cable and Plug Into Ventilator Top Left Connection

9. Plug into VueLink Module

10. Press VueLink Button On Module

11. Ventilator Set-up Box Will Appear

12. Touch Vent Type Vent Selection Box Will Appear

13. Select Correct Ventilator

14. Vent Alarm Parameters Will Be Set On The Ventilator. They Automatically Carry Over To Monitor Low Ve is the primary disconnect alarm

15. Press Main Set-up on Monitor

16. Press Calculations

17. Try The Calculations Page

18. Touch Parameter to Enter Data

19. Press Main Set-up and Loops to Check Out the Flow-Volume Loops

20. Loops and Waveforms Display

21. Be Sure to Disconnect Cable When Discontinuing Ventilator or Cables May Be Destroyed!!!

22. When Ventilator Is Cleaned, Return Cable To Watermelon Room

23. Now Relax and Have a Cool One!