1. Can’tTouchThis KSM Hammer Jun Wei Chuah Shihong Ng Ming Yang Koh

2. Project Concept/Motivation Concept: This project will act as deterrence against laptop thefts, providing the owner a greater degree of security. The prototype integrates off-the-shelf embedded components, such as motion-sensing accelerometer, buzzer, RFID reader and tags for passive activation of the device and the Tmote Sensor. Motivation: A laptop owner today is unable to leave his/her laptop unattended without risk of the laptop being stolen. Using our prototype system, an alarm will be activated if the laptop is being handled by unauthorized personnel.

3. Competitive Analysis: Caveo Anti-Theft PC Card: http://caveo.com/products/anti-theft.htm The product works by sensing motion and emitting an alarm when its moved. Our product will automatically activate the lock when it does not sense the user’s presence Kensingstone Cable Lock: http://us.kensington.com/html/11179.html The product works by physically locking the laptop to a secure object. Our product requires less user input and is a smaller and lighter solution.

4. Requirements: Functional Requirements: Detects the presence of the user when in range and disarms the device. Arms the device when user is out of range. Allows software arming and disarming of device. Detects movement of laptop when armed and sounds alarm accordingly. Non-functional Requirements: Reliability: When armed, the device will detect significant movement and sound the alarm. Usability: The device will require minimal user input after installation. Threshold: Non-extended small movements will be tolerated by the system. Timing: The alarm will trigger within 5 seconds of detection of motion.

5. Technical Specifications: Microcontroller: Moteiv “Tmote Sky” http://www.moteiv.com/products/tmotesky.php Buzzer: Generic “Buzzer” http://export.farnell.com/jsp/endecaSearch/partDetail.jsp?sku=1192515 $2.50 ea Motion sensor: Freescale “MMA7260QT Accelerometer” http://www.freescale.com/files/sensors/doc/data_sheet/MMA7260QT.pdf http://www.freescale.com/files/sensors/doc/data_sheet/MMA7260QT.pdf $5.68 ea Rechargeable battery : Generic “3V Rechargeable Lithium Battery” http://www.action-electronics.com/batcomp.htm Quote pending Wireless keycard components: RFID Reader: Texas Instruments “Series 2000 Micro Reader RI-STU-MRD1” http://www.ti.com/rfid/docs/manuals/pdfSpecs/RI-STU-MRD1.pdf Quote pending RFID Tag: Texas Instruments “Card Transponder TRP-R4FF” http://www.ti.com/rfid/docs/manuals/pdfSpecs/TRP-R4FF.pdf Quote pending Voltage step-up converter: Texas Instruments “TPS61027” http://focus.ti.com/docs/prod/folders/print/tps61027.html $3.15 ea

7. Architecture Block Diagram

8. State Chart for Laptop

9. State Chart for Microcontroller

10. State chart for RFID reader State chart for Buzzer State chart for Accelerometer

11. List of Use Cases Bootstrapping TearDown

12. User leaves laptop User moves laptop List of Use Cases(continued…)

13. Thief moves laptop User approaches laptop List of Use Cases(continued…)

14. Risks R1. Compatibility between RFID reader and Telos Motes R2. Compatibility between voltage regulator, RFID reader and Telos Motes R3. Compatibility of rechargeable battery with rechargeable mechanisms on Telos Motes R4. Real-world performance of RFID reader with respect to range R5. Constraints with respect to the ports available on Telos Motes R6. Difficulty in finding suitable algorithms differentiating significant and non-significant movements R7. Usage under different laptop operating environments

15. Mitigation of Risks Worst case usage of Zigbee protocol and Telos Motes for passive device  (R1, R2, R4) Requires device to always be plugged into laptop  (R3) Usage of 18-348 board to meet specific port requirements  (R5) Usage of multiplexers to meet port requirements  (R5) For worst case, any slight movement would trigger alarm  (R6) Requires Windows as main Operating System  (R7)

17. Test Cases Project Concept: Laptop Anti-theft Device Status Update:  Currently working on getting the RFID to communicate with the T-mote (certain voltage issues to sort out)  Desktop interface complete (with password screen) Project Test Cases (Testing the use cases):  Startup (Devices start up without errors)  User moves laptop (Nothing should happen)  User leaves laptop (Arming of device)  Thief moves laptop (Alarm rings)  User returns to laptop (Disarming of device)  Shutdown (Devices shutdown properly)

18. Performance Tests Degree of movement  Important to distinguish between subtle movements and theft  Test: Various movements around laptop, check correct identification of theft Response time before buzzer sounds  When theft is detected, important to sound buzzer in a timely manner  Test: Move laptop in armed mode, check that buzzer sounds in no more than 500ms (500ms X 100m/10s = 5m) Password security  Password must be resistant to cracking  Test: Look for loopholes in password system (some form of white-box testing) RFID / Disarming range  User’s presence must be detected from a suitable distance  Test: Tester moves into close proximity with the device (no more than 50cm), check that user’s presence is detected

19. Testing Process Usage of checklists for testing  Useful for checking degree of movement and RFID range  Useful for checking password security Usage of software tools in testing  Software timers for response time calculations (correlate with hardware timers for accurate timings) Testing under heavy conditions  Testing RFID range in area with several RFID readers or tags  Testing with non-user RFID tags

20. Looking Ahead Anticipated Difficulties  Ambiguity with regards to significance of movement  RFID functionality still a blur, might switch to Zigbee modules for authentication Thankfully, most of our test cases are pretty straightforward  Might include testing with errors to ensure functionality Lessons learnt in testing  As mentioned before, degree of movement test is still rather shady  Difficult for author of code to check correctness (password security)

21. Questions? Anyone?

23. Status Update Project Concept: Laptop Anti-theft Device Status Update (implementation):  Voltage incompatibility of RFID reader, as well as concerns with limited range of RFID  Using Zigbee protocol to communicate between t- motes  Achieved a satisfied level of sensitivity for device Status Update (testing):  Tested varying degrees of movement  Tested range of Zigbee protocol

24. Experimentation plan Metrics:  Range of T-motes Sets distance at which we arm and disarm the t-mote  Degree of movement of accelerometer Sets the degree movement to trigger off alarm How to measure  Conducted 40 trials for each metric Measured # times in which device is constantly being armed/disarmed for 5 seconds at a particular distance Measured # times in which alarm is sounded at the various movements

25. Initial data Almost every sudden movement would cause alarm to ring Thief can steal laptop by moving it away slowly Banging of lab table does not cause alarm to sound off most of the times Device will be in disarm mode constantly if user within 1.5 feet Device will likely be in arm mode constantly if user is at 16 feet from device

26. Looking forward Lessons learnt:  Subtleties in tinyOS, Deluge library prevented buttons from working Using genericComm instead of which hpluart to send packets Using Tosmsg->strength instead of Tosmsg->lqi What is next?  Receiving Tosmsg packets from PC  Setting and testing with different mote IDs  Analyze device for more appropriate sensitivities to movements and range

27. Questions? Anyone?