1. Frame Relay Lab 5.2.5 and Challenge Lab
5.2.5 Configuring Frame Relay Subinterfaces – this lab has been re-written
Challenge Lab

2. 5.2.5 Configuring Frame Relay Subinterfaces

4. Configure the interface s0/0

5. Create sub-interfaces
Amsterdam(config-if)#int s0/0.18 point-to-point
Amsterdam(config-subif)#description PVC to Paris
Amsterdam(config-subif)#ip address
Amsterdam(config-subif)#frame-relay interface-dlci 18

6. Configure routing Amsterdam(config)#router eigrp 100
Amsterdam(config-router)#network
Amsterdam(config-router)#network
Amsterdam(config-router)#network

7. Test connectivity
Ping
Use the show command
Show frame-relay pvc
Show frame-relay map
Show frame-relay lmi

8. Challenge Lab

9. Static route pointing to 192.168.3.2
Paris S0/0 is
Configure NAT with address overloading on the single address your S0/0 for all internal addresses
Configure S0/1 with PPP encapsulation on link between your Paris router and Berlin router
Configure S0/1 with CHAP on link between your Paris router and Berlin router
Database to authenticate your peer
EIGRP (with AS 300), advertising the link between Paris and Berlin router
Redistribute your (static) default route into EIGRP