Presentation is loading. Please wait.

Presentation is loading. Please wait.

ECE C03 Lecture 18ECE C03 Lecture 61 Lecture 18 VHDL Modeling of Sequential Machines Prith Banerjee ECE C03 Advanced Digital Design Spring 1998.

Published by Modified over 9 years ago

Similar presentations

Presentation on theme: "ECE C03 Lecture 18ECE C03 Lecture 61 Lecture 18 VHDL Modeling of Sequential Machines Prith Banerjee ECE C03 Advanced Digital Design Spring 1998."— Presentation transcript:

1 ECE C03 Lecture 18ECE C03 Lecture 61 Lecture 18 VHDL Modeling of Sequential Machines Prith Banerjee ECE C03 Advanced Digital Design Spring 1998

2 ECE C03 Lecture 18ECE C03 Lecture 62 Outline Describing Sequential Behavior in VHDL Latches Flip-Flops Finite State Machines Synthesis Using VHDL Using Packages in VHDL READING: Dewey 17.1, 17.3, 17.4, 17.5, 17.6, 17.7, 17.8, 17.10, 18.1, 18.2

3 ECE C03 Lecture 18ECE C03 Lecture 63 Latches Latches are easily described by using the concurrent signal assignment statement entity JK_LATCH is port ( J, K : in BIT; Q : inout BIT := ‘0’; Q_BAR : inout BIT := ‘1’;) end JK_LATCH; architecture TRUTH_TABLE of JK_LATCH is begin -- Map truth table into conditional concurrent statements Q <= Q when (J = ‘0’ and K = ‘0’) else ‘0’ when (J = ‘0’ and ‘K=‘1’) else ‘1’ when (J=‘1’ and K = ‘0’) else Q_BAR; Q_BAR <= not Q; end TRUTH_TABLE; J K Q+ 0 0 Q 0 1 0 1 0 1 1 1 Q/

4 ECE C03 Lecture 18ECE C03 Lecture 64 Level-sensitive Synchronous Behavior When a control signal like a clock controls whether the gated latch responds to inputs entity JK_GATED_LATCH is port ( J, K, CLK : in BIT; Q : inout BIT := ‘0’; Q_BAR : inout BIT := ‘1’;) end JK_LATCH; architecture TRUTH_TABLE of JK_GATED_LATCH is begin CLKED : block (CLK = ‘) -- guard expression begin Q <= guarded Q when (J = ‘0’ and K = ‘0’) else ‘0’ when (J = ‘0’ and ‘K=‘1’) else ‘1’ when (J=‘1’ and K = ‘0’) else Q_BAR; Q_BAR <= not Q; end block CLKED; end TRUTH_TABLE;

5 ECE C03 Lecture 18ECE C03 Lecture 65 Block Statements A block statement provides a way to combine a group of concurrent statements together A group of statements can be placed under a guard FORMAT label: block (guard expression) -- declarative part begin -- statement part end block label A guard is a boolean expression that evaluates to true or false. Concurrent statements in block execute if guard is true

6 ECE C03 Lecture 18ECE C03 Lecture 66 Guarded Statement A guarded assignment statement executes if either –(1) the guard expression changes from FALSE to TRUE –(2) The guard expression is TRUE and one of the signals appearing on the right hand side of the signal assignment changes value Example: B1 : block (CONTROL_SIGNAL = ‘1’) begin X <= guarded A or B after 5 min; Y <= A or B after 5 min; end blcok B1 5 10 15 20 25 30 35

7 ECE C03 Lecture 18ECE C03 Lecture 67 Flip-flops Edge-triggered flip-flops are controlled by signal transitions, latches are controlled by levels. entity JK_FF is port ( J, K, CLK : in BIT; Q : inout BIT := ‘0’; Q_BAR : inout BIT := ‘1’;) end JK_LATCH; architecture DATA_FLOW of JK_FF is begin CLKED : block (CLK = ‘1’ and not CLK’STABLE) -- guard expression begin Q <= guarded Q when (J = ‘0’ and K = ‘0’) else ‘0’ when (J = ‘0’ and ‘K=‘1’) else ‘1’ when (J=‘1’ and K = ‘0’) else Q_BAR; Q_BAR <= not Q; end block CLKED; end DATA_FLOW;

8 ECE C03 Lecture 18ECE C03 Lecture 68 Predefined Signal Attributes VHDL provides several predefined attributes which provide information about the signals signal_name’ACTIVE: indicates if a transaction has occurred signal_name’QUITE: indicates that transaction has not occurred signal_name’EVENT : If an event has occurred on signal_name signal_name’STABLE: If an event has not occurred signal_name’LAST_EVENT: Time elapsed since last event has occurred signal_name’DELAYED(T): A signal identical to signal_name but delayed by T units of type TIME;

9 ECE C03 Lecture 18ECE C03 Lecture 69 Setup and Hold Times Setup and hold times are timing restrictions placed on synchronous sequential systems Use assertions in VHDL to describe requirements architecture DATA_FLOW of D_FF is begin assert not (CLK’DELAYED(HOLD) = ‘1’ and not CLK’DELAYED(HOLD)’STABLE and not D’STABLE(SETUP+HOLD) report “Setup/Hold Timing Violation”; CLKED: block (CLK = ‘1’ and not CLK’STABLE) Q <= guarded D; Q_BAR <= not Q; end DATA_FLOW; Hold Setup D CLK CLK’DELAYED(HOLD)

10 ECE C03 Lecture 18ECE C03 Lecture 610 Synchronous Finite State Machines Consider example of binary counter Z0 Z1 Z2 A B C

11 ECE C03 Lecture 18ECE C03 Lecture 611 Data flow VHDL Modeling of Counter entity BIN_COUNTER is port (CLK : in BIT; Z : out BIT_VECTOR(2 downto 0)); end BIN_COUNTER; architecture DATA_FLOW of BIN_COUNTER is type FF_INDEX is (A, B, C); type FF_TYPE is array (FF_INDEX) of BIT; signal Q : FF_TYPE; begin DFF: block (CLK = ‘1’ and not CLK’STABLE) -- rising edge begin -- State D flip flops Q(A) <= guarded (Q(A) and not Q(B) ) or (Q(A) and not Q(C)) or (not Q(A) and Q(B) and Q(C); Q(B) <= guarded Q(B) xor Q(C); Q(C) <= guarded not Q(C); end block DFF; -- output function Z <= Q(A) & Q(B) & Q(C); end DATA_FLOW;

12 ECE C03 Lecture 18ECE C03 Lecture 612 Algorithmic Modeling of State Machines Until now, we showed state machines being modeled by data flow (using concurrent statements) We will describe using algorithmic or procedural form using conventional programming language semantics –process statements –wait statements –variable and signal assignments –if and case statements –loop statements

13 ECE C03 Lecture 18ECE C03 Lecture 613 Binary Counter State Diagram S0 000 S5 101 S3 011 S1 001 S7 111 S6 110 S2 010 S4 100

14 ECE C03 Lecture 18ECE C03 Lecture 614 VHDL Model of Counter architecture ALGORITHM of BIN_COUNTER is begin process variable PRESENT_STATE: BIT_VECTOR(2 downto 0) := B”111”; begin case PRESENT_STATE is when B”000” => PRESENT_STATE := B”001”; when B”001” => PRESENT_STATE := B”010”; when B”010” => PRESENT_STATE := B”011”; when B”011” => PRESENT_STATE := B”100”; when B”100” => PRESENT_STATE := B”101”; when B”101” => PRESENT_STATE := B”110”; when B”110” => PRESENT_STATE := B”111”; when B”111” => PRESENT_STATE := B”000”; end case; Z <= PRESENT_STATE after 10 nsec; wait until (CLK = ‘1’; end process; end ALGORITHM ;

15 ECE C03 Lecture 18ECE C03 Lecture 615 VHDL Model of FSMs for Synthesis One can define a VHDL model of a FSM (Mealy Machine) using two processes –One for the combinational logic for the next state and output functions –One for the sequential elements Memory elements, FFs Next state Logic function Output logic function Primary inputs Presnt state

16 ECE C03 Lecture 18ECE C03 Lecture 616 Architecture Body of FSM architecture rtl of entname is subtype state_type is std_ulogic_vector(3 downto 0); constant s0 : state_type := "0001"; constant s1 : state_type := "0010"; constant s2 : state_type := "0100"; constant s3 : state_type := "1000"; signal state, next_state : state_type; signal con1, con2, con3 : std_ulogic; signal out1, out2 : std_ulogic; signal clk, reset : std_ulogic; -- process comb logic -- process state registers end architecture rtl; s0 s1 s2 s3

17 ECE C03 Lecture 18ECE C03 Lecture 617 Process Statements for Comb/State Reg Logic begin state_logic : process (state, con1, con2, con3) is begin case state is when s0 => out1 <= '0'; out2 <= '0'; next_state <= s1; when s1 => out1 <= '1'; if con1 = '1' then next_state <= s2; else next_state <= s1; end if; when s2 => out2 <= '1'; next_state <= s3; when s3 => if con2 = '0' then next_state <= s3; elsif con3 = '0' then out1 <= '0'; next_state <= s2; else next_state <= s1; end if; when others => null; end case; end process state_logic; state_register : process (clk, reset) is begin if reset = '0' then state <= s0; elsif rising_edge(clk) then state <= next_state; end if; end process state_register;

18 ECE C03 Lecture 18ECE C03 Lecture 618 Use of VHDL in Synthesis VHDL was initially developed as a language for specification and simulation and modeling Recently being used as a language for hardware synthesis from logic synthesis companies –Synopsys Design Compiler, Ambit BuildGates, Mentor Graphics Autologic,.. Synthesis tools take a VHDL design at behavioral or structural level and generate a logic netlist –Minimize number of gates, delay, power, etc. Area delay

19 ECE C03 Lecture 18ECE C03 Lecture 619 Synthesizable Subset of VHDL There are a number of constructs that cannot be synthesized into hardware –File operations including textio –Assertion statements There are some generally accepted ways of entering VHDL descriptions such that it correctly synthesizes the logic

20 ECE C03 Lecture 18ECE C03 Lecture 620 Synthesizable VHDL Most synthesis tools can take in a structural VHDL specifying flip-flops and gates explictly and then minimize the design When one tries to do true synthesis, i.e. specify a design in behavioral form, then not all tools can recognize and synthesize correct logic Example: all synthesis tools recognize the rising edge of a clock signal if specified as: –rising_edge(clk) clk’event and clk = ‘1’ –If specified otherwise, tools do not recognize clock edge

21 ECE C03 Lecture 18ECE C03 Lecture 621 Four ways of specifying DFF DFF1: process (clk) is begin if rising_edge(clk) then q <= d; end if; end process; THIS IS RECOGNIZED AS A FF BY MOST TOOLS DFF2: process is begin wait until rising_edge(clk)l q <= d; end process; DFF3: q <= d when rising_edge(clk) else q; DFF4: block (rising_edge(clk) and not clk’stable) is begin q <= guarded d; end block;

22 ECE C03 Lecture 18ECE C03 Lecture 622 Registered Comparator The devices stores result of comparison of two inputs a and b on rising clock edge Process (clk) is begin if (a=b) then d := ‘1; else d := ‘0’; end if; if rising_edge(clk) then q <= d; end if; end process; THIS WILL NOT SYNTHESIZE SINCE PROCESS EXECUTES FOR BOTH EDGES OF CLOCK Process(clk) is begin if rising_edge(clk) then if (a=b) then q <= ‘1’; else q <= ‘0’; end if; end process; THIS WILL CORRECTLY SYNTHESIZE SINCE ASSIGNMENT HAPPENS ON RISING EDGE OF CLOCK

23 ECE C03 Lecture 18ECE C03 Lecture 623 Examples of Correct Synthesis To synthesize a simple logic gate: y <= a or b; To implement a multiplexer: y <= a when x = ‘1’ else b; ANOTHER WAY: case x is when x = ‘1’ => y <= a; when x = ‘0’ => y <= b; end case; To implement a DFF process (reset, clk) is begin if reset = ‘1’ then q <= 0; elseif rising_edge(clk) then q <= d; end if; end process;

24 ECE C03 Lecture 18ECE C03 Lecture 624 Implied Latches in VHDL Descriptions EXAMPLE of a Multiplexer where all cases specified, I.e. y gets a new value in all cases, hence is a combinational logic: case x is when x = ‘1’ => y <= a; when x = ‘0’ => y <= b; end case; EXAMPLE of a D latch where for one case, output not specified, implied that previous value retained case x is when x = ‘1’ => y <= a; end case; abab x x clk ad y q y

25 ECE C03 Lecture 18ECE C03 Lecture 625 Examples of Wrong VHDL Synthesis Given a statement y <= a + b + c + d; –Synthesis tool will create a tree of adders by adding a + b, then adding to c, and then to c; Instead if specified as y <= (a +b) + (c +d); –the synthesis tool will be forced to synthesize a tree of depth 2 by adding (a+b), and (c+d) in parallel, then adding results together. Another mistake y <= a or b or c and d; Instead write as y <= (a or b) or (c and d);

26 ECE C03 Lecture 18ECE C03 Lecture 626 Use of Packages in VHDL A VHDL package is simply a way of grouping a collection of related declarations that serve a common purpose Can be reused by other designs package identifier is {package declaration} end package identifier;

27 ECE C03 Lecture 18ECE C03 Lecture 627 Predefined Packages The predefined types in VHDL are stored in a library “std’ Each design unit is automatically preceded by the following context clause library std, work; use std.standard.all; package standard is type boolean is (false, true); -- defined for operators =, =,.. type bit is (‘0’, ‘1’); -- defined for logic operations and, or, not… type character is (..); type integer is range IMPLEMENTATION_DEFINED; subtype natural is integer range 0 to integer’high; type bit_vector is array(natural range <>) of bit; … end package standard;

28 ECE C03 Lecture 18ECE C03 Lecture 628 Package IEEE Standard 1164 IEEE standard is based on multi-valued logic type and standard logic gates type std_ulogic is (‘U’ -- uninitialized ‘X’ -- forcing unknown ‘0’ -- forcing zero ‘1’ -- forcing one ‘Z’ -- high impedance ‘W’ -- weak impedance ‘L’ -- weak zero ‘H’ -- weak one ‘-’ -- don’t care); Include a line before each entity or architecture body library ieee; use ieee.std_logic1164.all;

29 ECE C03 Lecture 18ECE C03 Lecture 629 Package IEEE Standard 1164 type std_ulogic_vector is array (natural range <>) of std_ulogic; function resolved (s: std_ulogic_vector) return std_ulogic; subtype UX01 is resolved std_ulogic range ‘U’ to ‘1’; -- U, X, 0, 1 function “and” (l : std_ulogic; r : std_ulogic) return UX01; function “and” (l : std_ulogic_vector; r : std_ulogic_vector) return std_ulogic_vector; function To_bit (s : std_ulogic; xmap : bit := ‘0’) return bit; function rising_edge(signal s: std_logic) return boolean;

30 ECE C03 Lecture 18ECE C03 Lecture 630 Summary Describing Sequential Behavior in VHDL Latches Flip-Flops Finite State Machines Synthesis Using VHDL Using Packages in VHDL NEXT LECTURE: Case Study: Pipelined Multiplier Accumulator READING: P. Ashenden, “The Designer’s Guide to VHDL”, Morgan Kaufmann, Chapter 6

Download ppt "ECE C03 Lecture 18ECE C03 Lecture 61 Lecture 18 VHDL Modeling of Sequential Machines Prith Banerjee ECE C03 Advanced Digital Design Spring 1998."

Similar presentations

1 Lecture 13 VHDL 3/16/09. 2 VHDL VHDL is a hardware description language. The behavior of a digital system can be described (specified) by writing a.

1 Lecture 13 VHDL 3/16/09. 2 VHDL VHDL is a hardware description language. The behavior of a digital system can be described (specified) by writing a.
L18 – VHDL for other counters and controllers. Other counters  More examples Gray Code counter Controlled counters  Up down counter  Ref: text Unit.

L18 – VHDL for other counters and controllers. Other counters  More examples Gray Code counter Controlled counters  Up down counter  Ref: text Unit.
History TTL-logic PAL (Programmable Array Logic)

History TTL-logic PAL (Programmable Array Logic)
Modeling & Simulating ASIC Designs with VHDL Reference: Smith text: Chapters 10 & 12.

Modeling & Simulating ASIC Designs with VHDL Reference: Smith text: Chapters 10 & 12.
Introduction to VHDL (Lecture #5) ECE 331 – Digital System Design The slides included herein were taken from the materials accompanying Fundamentals of.

Introduction to VHDL (Lecture #5) ECE 331 – Digital System Design The slides included herein were taken from the materials accompanying Fundamentals of.
6/27/20061 Sequence Detectors Lecture Notes – Lab 5 Sequence detection is the act of recognizing a predefined series of inputs A sequence detector is a.

6/27/20061 Sequence Detectors Lecture Notes – Lab 5 Sequence detection is the act of recognizing a predefined series of inputs A sequence detector is a.
Signals vs. Variables Workshop Fri/Sat Test bench creation Misc IP Cores Chipscope Pro When Demos due.

Signals vs. Variables Workshop Fri/Sat Test bench creation Misc IP Cores Chipscope Pro When Demos due.
Week 6.1Spring 2006 14:332:331 Computer Architecture and Assembly Language Spring 2006 Week 6 VHDL Programming [Adapted from Dave Patterson’s UCB CS152.

Week 6.1Spring :332:331 Computer Architecture and Assembly Language Spring 2006 Week 6 VHDL Programming [Adapted from Dave Patterson’s UCB CS152.
ELEN 468 Lecture 191 ELEN 468 Advanced Logic Design Lecture 19 VHDL.

ELEN 468 Lecture 191 ELEN 468 Advanced Logic Design Lecture 19 VHDL.
VHDL And Synthesis Review. VHDL In Detail Things that we will look at: –Port and Types –Arithmetic Operators –Design styles for Synthesis.

VHDL And Synthesis Review. VHDL In Detail Things that we will look at: –Port and Types –Arithmetic Operators –Design styles for Synthesis.
ECE C03 Lecture 141 Lecture 14 VHDL Modeling of Sequential Machines Hai Zhou ECE 303 Advanced Digital Design Spring 2002.

ECE C03 Lecture 141 Lecture 14 VHDL Modeling of Sequential Machines Hai Zhou ECE 303 Advanced Digital Design Spring 2002.
George Mason University ECE 448 – FPGA and ASIC Design with VHDL Finite State Machines State Diagrams, State Tables, Algorithmic State Machine (ASM) Charts,

George Mason University ECE 448 – FPGA and ASIC Design with VHDL Finite State Machines State Diagrams, State Tables, Algorithmic State Machine (ASM) Charts,
Advanced Verilog EECS 270 v10/23/06.

Advanced Verilog EECS 270 v10/23/06.
Package with 4-valued logic Signal Attributes Assertion Data Flow description.

Package with 4-valued logic Signal Attributes Assertion Data Flow description.
Introduction to VHDL (part 2)

Introduction to VHDL (part 2)
1 H ardware D escription L anguages Basic Language Concepts.

1 H ardware D escription L anguages Basic Language Concepts.
ECE 2372 Modern Digital System Design

ECE 2372 Modern Digital System Design
1 Part I: VHDL CODING. 2 Design StructureData TypesOperators and AttributesConcurrent DesignSequential DesignSignals and VariablesState Machines A VHDL.

1 Part I: VHDL CODING. 2 Design StructureData TypesOperators and AttributesConcurrent DesignSequential DesignSignals and VariablesState Machines A VHDL.
1 H ardware D escription L anguages Modeling Complex Systems.

1 H ardware D escription L anguages Modeling Complex Systems.
A VHDL Tutorial ENG2410. ENG241/VHDL Tutorial2 Goals Introduce the students to the following: –VHDL as Hardware description language. –How to describe.

A VHDL Tutorial ENG2410. ENG241/VHDL Tutorial2 Goals Introduce the students to the following: –VHDL as Hardware description language. –How to describe.

Similar presentations

Ads by Google