1. 2003 CSU RoverSat

2. RoverSat: Team Members Structures: Ehren Ehmann Christopher Mai Electronics: John Rhoades Jesse Wilson

3. RoverSat: Mission Statement The Rover must ride up on a balloon to an altitude of 100,000 ft. and then ride down on a parachute. Upon landing the rover must detach from the parachute, drive away from the landing site, and take at least one picture of its surroundings.

4. RoverSat: Design Constraints The entire package must weigh no more than 750 grams. The vehicle must endure a wide range of temperatures, pressures, and humidity. The vehicle must detach from the parachute after landing. The vehicle must autonomously move from the landing site. The vehicle must take at least one picture of the landing site.

5. RoverSat: Principal Design Breakdown Structure: Main Body Drive System Release Mechanism Camera System Electronics: Circuits Microprocessor Programming

6. RoverSat: Structures Main Body Constraints Must be light weight Must be durable Must keep out elements Solution Glass Fiber and Epoxy Internal frame reinforced with PC Board

7. RoverSat: Structures Drive System Constraints Must be Durable Must withstand landing impact Must provide adequate traction and torque for movement Solution PC board wheels with rubber traction Servo Drive

8. RoverSat: Structures Release Mechanism Constraints Must prevent rover from being tangled on line Must not disconnect from line early Solution Down tube running length of rover Servo actuated release

9. RoverSat: Structures Camera System Constraints Must be operable in any orientation Must be weather proof Must provide stable platform Solution Camera can protrude from either top or bottom Servo actuated movement PC Board mount

10. RoverSat: Control Systems Overview Constraints Fully autonomous Able to operate in- flight, withstanding temperature, pressure… Light weight Reliable

11. RoverSat: Control Systems Components Power: Energizer lithium photo batteries CPU: Atmel MegaAVR 8- bit RISC Control: Toshiba Darlington pair driver chip All components rated to at least -40º C Fuses to ensure one bad component won’t debilitate entire system

12. RoverSat: Control Systems Software Written in Atmel assembly Power-up/standby Launch TimerRelease/Deploy Drive Take Picture

13. RoverSat: Control Systems Electronics Custom-designed PC board Designed using CadSoft EAGLE Printed by Advanced Circuits Hand-assembled and soldered

14. RoverSat: Control Systems Controller Board

15. RoverSat: Flight Day Pre-Flight Upon prep of the vehicle it was determined that the program was unreliable so the decision was made to send it up without the microprocessor. The structure was tested to make sure it could survive the impact.

16. RoverSat: Flight Day Post-Flight Evaluation The structure was intact upon landing There were no signs of damage to the drive train, camera, or external structure after removing it from the tether.

17. RoverSat: Conclusion The DemoSat program allowed for a huge degree of design freedom and allowed our group members to learn not only about the design process but group dynamics and how to succeed not only as an individual but as a team. Leaving the project at the end of the ten-week program left us more prepared for our senior design projects and more prepared to utilize the tools that we have been learning for the last few years.