Presentation is loading. Please wait.

Presentation is loading. Please wait.

Introduction to IRLP Craig Davidson K1BDX Houston, Texas

Published byArthur Murphy Modified over 9 years ago

Similar presentations

Presentation on theme: "Introduction to IRLP Craig Davidson K1BDX Houston, Texas"— Presentation transcript:

1 Introduction to IRLP Craig Davidson K1BDX Houston, Texas k1bdx@amsat.org

2 How to connect an IRLP node Craig Davidson K1BDX K1 bdx@amsat.org 146.46 MHz Simplex Internet Parallel Printer Port for PTT & COS Sound Card Mic & Speaker Parallel Printer Port for PTT & COS Sound Card Mic & Speaker 147.58 MHz Simplex Simply key up on the node frequency and dial the 4-digit node number To Disconnect dial 73

3 How does an IRLP node talk to another node? Craig Davidson K1BDX K1 bdx@amsat.org 146.46 MHz Simplex Ispeaker and Imike are software programs that come (for free) with the standard IRLP Linux operating system Internet Parallel Printer Port for PTT & COS Audio Card Mic & Speaker Parallel Printer Port for PTT & COS Audio Card Mic & Speaker 147.58 MHz Simplex ImikeIspeaker ImikeIspeaker UDP voice packets Imike takes your voice from the mic input on the sound card and digitizes it into UDP voice packets and sends them out over the internet to any IP address and port number that you choose whenever pin 11 on the parallel printer port is shorted to ground Ispeaker listens for UDP voice packets from the internet on any port you choose and turns them back into analog and puts that audio out the speaker jack on the sound card. When valid UDP packets are received pin 3 on the parallel printer port goes high

4 How does an IRLP reflector work? Craig Davidson K1BDX K1 bdx@amsat.org IRLP reflector Computer 146.46 MHz Simplex Internet No sound card required on reflector computer. It connects to Internet via high bandwidth connection with a static IP and simply repeats all received VoIP digital voice packets to all other connected nodes. Bandwidth needed is approx 50 kbps per connection Internet Parallel Printer Port for PTT & COS Audio Card Mic & Speaker Parallel Printer Port for PTT & COS Audio Card Mic & Speaker 147.58 MHz Simplex Ispeaker Imike Ispeaker Imike

5 IRLP reflector Craig Davidson K1BDX K1 bdx@amsat.org IRLP Reflector Computer 146.94 MHz Repeater 146.46 MHz Simplex Internet 146.44 MHz Simplex 147.58 MHz Simplex All connected nodes are listening to the reflector computer and also sending a short heartbeat signal every 8 seconds Heartbeat Internet

6 IRLP reflector Craig Davidson K1BDX K1 bdx@amsat.org IRLP Reflector Computer 146.94 MHz Repeater 146.46 MHz Simplex 146.44 MHz Simplex 147.58 MHz Simplex When no one is keyed up then no voice packets are flowing on the internet Everyone is listening Only heartbeat signals every 8 seconds

7 IRLP reflector Craig Davidson K1BDX K1 bdx@amsat.org IRLP Reflector Computer 146.94 MHz Repeater 146.46 MHz Simplex Internet 146.44 MHz Simplex 147.58 MHz Simplex Signal being received from node When a node keys up…

8 IRLP reflector Craig Davidson K1BDX K1 bdx@amsat.org IRLP Reflector Computer 146.94 MHz Repeater 146.46 MHz Simplex Internet 146.44 MHz Simplex 147.58 MHz Simplex Signal being received from node Signal being Repeated by reflector computer Signal being Repeated by reflector computer Signal being Repeated by reflector computer …then voice packets are copied and repeated to all other nodes by the reflector computer

9 IRLP reflector Craig Davidson K1BDX K1 bdx@amsat.org IRLP Reflector Computer 146.94 MHz Repeater 146.46 MHz Simplex Internet 146.44 MHz Simplex 147.58 MHz Simplex Signal being Repeated by reflector computer Signal being Repeated by reflector computer Signal being Repeated by reflector computer When that node unkeys…

10 IRLP reflector Craig Davidson K1BDX K1 bdx@amsat.org IRLP Reflector Computer 146.94 MHz Repeater 146.46 MHz Simplex 146.44 MHz Simplex 147.58 MHz Simplex … Then the reflector stops repeating voice packets Everyone is listening

11 IRLP reflector Craig Davidson K1BDX K1 bdx@amsat.org IRLP Reflector Computer 146.94 MHz Repeater 146.46 MHz Simplex 146.44 MHz Simplex 147.58 MHz Simplex Internet Signal being received from node When another different node keys up…

12 IRLP reflector Craig Davidson K1BDX K1 bdx@amsat.org IRLP Reflector Computer 146.94 MHz Repeater 146.46 MHz Simplex Internet 146.44 MHz Simplex 147.58 MHz Simplex Internet Signal being received from node Signal being Repeated by reflector computer Signal being Repeated by reflector computer Signal being Repeated by reflector computer … then voice packets are copied and repeated to all other nodes.

13 IRLP reflector Craig Davidson K1BDX K1 bdx@amsat.org IRLP Reflector Computer 146.94 MHz Repeater 146.46 MHz Simplex Internet 146.44 MHz Simplex 147.58 MHz Simplex Internet Signal being Repeated by reflector computer Signal being Repeated by reflector computer Signal being Repeated by reflector computer When that second node unkeys…

14 IRLP reflector Craig Davidson K1BDX K1 bdx@amsat.org IRLP Reflector Computer 146.94 MHz Repeater 146.46 MHz Simplex 146.44 MHz Simplex 147.58 MHz Simplex Then once again… no voice packets are flowing on the internet Only heartbeat signals every 8 seconds Everyone is listening

15 IRLP Interface Card Sound Card Parallel Printer Port IRLP Interface Board DTMF decode chip PTTSquelch Mic Speaker Microphone Pin 3 Pin 11 Pins 10,12, 13, 15 Pin 2 Pin 7 Pin 8 Power

16 Always Listening DTMF program always monitors COS and DTMF on parallel port from RF mobile station Call Listener program monitors TCP port 15425 for connect request from other node Calling Once detected DTMF sequence passed to the call script Server is asked for latest IP of node being called Irlp_call is started, and a TCP connection is made to the called node on port 15425 Remote node starts irlp_answer in response to TCP call on port 15425 PGP security performs a dual challenge to ensure calling node is an IRLP node Irlp_call and irlp_answer start speak freely software on UDP ports 2074 and 2075 During the Call Irlp_call and irlp_answer send keep-alives in the background. If keep-alive fails, the connection drops (every 15 sec) Disconnect Disconnecting node uses TCP info channel (port 15425) to send disconnect message. Unexpected drop in the TCP connection prompts reset of IRLP node If the timeout elapses, disconnect is sent IRLP connect/disconnect process

17 What happens during connection Step 1 Craig Davidson K1BDX K1 bdx@amsat.org 146.46 MHz Simplex Internet Parallel Printer Port for PTT & COS Sound Card Mic & Speaker Parallel Printer Port for PTT & COS Sound Card Mic & Speaker 147.58 MHz Simplex After you dial a node number on your touchtone pad, your node contacts the IRLP system server for the IP address of other node What is IP address of node xxxx? IRLP System Server

18 What happens during connection Step 2 Craig Davidson K1BDX K1 bdx@amsat.org 146.46 MHz Simplex Internet Parallel Printer Port for PTT & COS Sound Card Mic & Speaker Parallel Printer Port for PTT & COS Sound Card Mic & Speaker 147.58 MHz Simplex Your node then sends a connect request to the other node’s IP address on port 15425

19 What happens during connection Step 3 Craig Davidson K1BDX K1 bdx@amsat.org 146.46 MHz Simplex Internet Parallel Printer Port for PTT & COS Sound Card Mic & Speaker Parallel Printer Port for PTT & COS Sound Card Mic & Speaker 147.58 MHz Simplex The other challenges you for your PGP encryption key on port 15425

20 What happens during connection Step 4 Craig Davidson K1BDX K1 bdx@amsat.org 146.46 MHz Simplex Internet Parallel Printer Port for PTT & COS Sound Card Mic & Speaker Parallel Printer Port for PTT & COS Sound Card Mic & Speaker 147.58 MHz Simplex Ispeaker and Imike are then started in each node and voice communications can begin ImikeIspeaker ImikeIspeaker UDP voice packets

21 What happens during connection Step 5 Craig Davidson K1BDX K1 bdx@amsat.org 146.46 MHz Simplex Parallel Printer Port for PTT & COS Sound Card Mic & Speaker Parallel Printer Port for PTT & COS Sound Card Mic & Speaker 147.58 MHz Simplex After the connection begins both your node and the other node send update messages to the IRLP system server web page Please update my status on your web page IRLP System Server Please update my status on your web page

22 Where to get the software Download Linux Centos 4 Download for free and make your own ISO boot disk http://mirror.irlp.net/iso/IRLP_CD_7.08.iso http://irlp.net/new-install/IRLP_OS_Installation_COS44.pdf Boot from CD ROM on old windows computer Erase all old software and partitions on old computer Log into Centos 4 computer and download IRLP software /root/get-irlp-files If this is not a new install then you must have an IRLP backup file in the TMP folder Experimental nodes are free but If you want a registered node with a node number you must first buy an interface card ($123) before you install with /root/get-irlp-files You can order here: http://irlp.net/orderform.html Craig Davidson K1BDX K1 bdx@amsat.org

23 Speak Freely software developed by John Walker in 1995 and released to the Public domain: http://www.fourmilab.ch/speakfree/eol/ David Cameron in Vancouver Canada modified the source code: Ispeaker keys transmitter via pin 3 of the parallel printer port when packets received. Imike looks for pin 11 shorted to ground to begin sending VIOP packets General information for IRLP http://irlp.net Status page for all nodes and reflectors: http://status.irlp.net After the node is installed: http://irlp.net/new-install/Ver3_Wiring.pdf http://irlp.net/new-install/afterinstallv2.pdf Craig Davidson K1BDX K1 bdx@amsat.org

24 Required Computer Hardware Old cheap (or free) computers seem to work better than new ones 300 MHz processor is fine 128 megabytes of RAM is fine Parallel port and Ethernet interface required Serial port is not used only a 2 Gigabyte hard drive is required. Hard to find one that small these days. Centos 4 can’t seem to run on a drive bigger than 120 gig Consider a 2 gig solid state hard drive for $25 VIA computers (Canadian Company) Lots of good deals on Ebay Craig Davidson K1BDX K1 bdx@amsat.org

25 Craig’s Opinions (He seems to have a lot of ‘em!) An idle node is a wasted node Find a reflector channel you like and hang out there. Disconnect only if local conversation (or node to node connection) is desired When finished go back to reflector You won’t know whats happening on the reflector unless you are connected No Channel Surfing – This isn’t your TV remote control If you connect to a reflector then stay there a while Make sure you listen for AT LEAST 60 SECONDS before talking Do not interrupt ongoing conversations. Wait, Listen, then join in. Craig Davidson K1BDX K1 bdx@amsat.org

26 Advanced Topics Port forwarding Repeaters as nodes Mobile nodes Echoirlp Remote Admin Web page Personal web page Experimental nodes and reflectors GPS / APRS reporting node location Remote commanding with Icom C-IV port Open VPN Private Echolink Proxy Server Craig Davidson K1BDX K1 bdx@amsat.org

27 The End

Download ppt "Introduction to IRLP Craig Davidson K1BDX Houston, Texas"

Similar presentations

Hardware Lesson 3 Inside your computer.

Hardware Lesson 3 Inside your computer.
Fred P. Baker CCIE, CCIP(security), CCSA, MCSE+I, MCSE(2000)

Fred P. Baker CCIE, CCIP(security), CCSA, MCSE+I, MCSE(2000)
Telecommunications & Networking

Telecommunications & Networking
Computer networks Fundamentals of Information Technology Session 6.

Computer networks Fundamentals of Information Technology Session 6.
Chapter Six Networking Hardware.

Chapter Six Networking Hardware.
The physical parts of Computer

The physical parts of Computer
Computer Basics 1 Computer Basic 1 includes two lessons:

Computer Basics 1 Computer Basic 1 includes two lessons:
5/21/20151 IRLP LINKING Peter Barry, VA6PJB / KE5HQC.

5/21/20151 IRLP LINKING Peter Barry, VA6PJB / KE5HQC.
1 The Internet Radio Linking Project Presented by Basil Chuck Davidson, 6Y5DB For IEEE Jamaica Section, August 20, 2003.

1 The Internet Radio Linking Project Presented by Basil Chuck Davidson, 6Y5DB For IEEE Jamaica Section, August 20, 2003.
 Html is made up of tags. The majority of them will be in pairs.  Some of the most common tags are shown below. TagsWhat does this mean? Bold Italic.

 Html is made up of tags. The majority of them will be in pairs.  Some of the most common tags are shown below. TagsWhat does this mean? Bold Italic.
Group 4 Craig Bellamy Jeremy Ruple Frank Swehosky Ryan VanAlstine.

Group 4 Craig Bellamy Jeremy Ruple Frank Swehosky Ryan VanAlstine.
Lesson 5-Accessing Networks. Overview Introduction to Windows XP Professional. Introduction to Novell Client. Introduction to Red Hat Linux workstation.

Lesson 5-Accessing Networks. Overview Introduction to Windows XP Professional. Introduction to Novell Client. Introduction to Red Hat Linux workstation.
70-290: MCSE Guide to Managing a Microsoft Windows Server 2003 Environment Chapter 8: Implementing and Managing Printers.

70-290: MCSE Guide to Managing a Microsoft Windows Server 2003 Environment Chapter 8: Implementing and Managing Printers.
M2M Gateway Features Jari Lahti, CTO www.violasystems.com.

M2M Gateway Features Jari Lahti, CTO
 D-STAR is an open standard for digital voice and data on Amateur Radio  One of several digital modes in Amateur Radio  Developed by Japan Amateur.

 D-STAR is an open standard for digital voice and data on Amateur Radio  One of several digital modes in Amateur Radio  Developed by Japan Amateur.
Amateur Radio meets Voice over the Internet Protocol

Amateur Radio meets Voice over the Internet Protocol
VOIP ENGR 475 – Telecommunications Harding University November 16, 2006 Jonathan White.

VOIP ENGR 475 – Telecommunications Harding University November 16, 2006 Jonathan White.
1. 2 LXU800 User’s Manual 1.Installation – Windows XP ------------------ 5 2.UI Features Introduction -------------------- 12 3.Data Connection & Disconnection.

1. 2 LXU800 User’s Manual 1.Installation – Windows XP UI Features Introduction Data Connection & Disconnection.
Attendee overview 1 Joining a Redback Webinar. Before the Webinar Getting organised It’s always a good idea to ensure you are prepared well in advance.

Attendee overview 1 Joining a Redback Webinar. Before the Webinar Getting organised It’s always a good idea to ensure you are prepared well in advance.
Troubleshooting Hardware Issues Lesson 5. Objectives 2.

Troubleshooting Hardware Issues Lesson 5. Objectives 2.

Similar presentations

Ads by Google