Choose my guitar template for “Big Blue”. Cut out two pieces of woods from a long wood. (Then, little bit longer than my guitar body template scale.) “Big Blue”
Get small pieces of woods for fitting my guitar body scale completely. Then,glue down all of pieces. (need to use holders) Make sure glue down right place. Two pieces are going to be a base of my guitar body. My guitar come from six pieces of woods.
Cut out guitar body looks like my template shape. (cut out around two inches bigger than my template)
I use a machine for cleaning (sanding)both sides of my guitar. Mr.Calkins cut out around my guitar body same size as my template correctly.
Sand down my guitar body for make its smooth. And, I must fix some holes on guitar for looking good. some kinds of sand machines.
Punch to make 3 space. One space is going to my guitar’s neck space. Then, other 2 space are going to neck pickup and bridge pickup. Use the machine for making spaces
~Final sand~ Use many kinds of sand machines for final sanding! And, many directions.(length, wide,diagonal) Make edge
I get first coat on my guitar. Then, I need to sand out. Looks like that. I want coloring light blue!
Mr.Calkins paint my base color, which is white. Light blue is most cool color in the world ever!
I design my guitar. Paint second color, which is light blue on the white color. Like these!
I am ready to working on my guitar neck. Cut two pieces of wood.(small&big) Glue it up like this. Next… Go on!!
1.Cut out the headstock point straight, so that headstock is going to be like that. 2.Put a blue tube tight and tape the tube all the way up to headstock. Don`t Confuse! Ask someone to help you. Like this (#1)
Make a finger board,choose a color you like and cleaning that with a machine. Make lines on my board.(23) Cut out sides of my neck and sides of my headstock also after glued up fingerboard and neck.
Sand to make a round shape to neck. Sand the headstock,too. Hey, I got a stuck! What?