Presentation on theme: "S-band BPM prime Support 2008. 4. 9 Hyoung Suk Kim KNU."— Presentation transcript:
S-band BPM prime Support 2008. 4. 9 Hyoung Suk Kim KNU
Support Jig before Assembling b d a e c f Parts Names S-band BPM * Soft pusher ; MC Nylon (mono cast nylon) Right rim support ; Aluminum Turning knob ; Aluminum (or Brass) Left rim support ; Aluminum Base Plate ; Aluminum * S-band BPM has been sketched without its beam pipe for easy view
Functional Description on Jig Pieces Turning knob (d) has notched surface around it to make easy to handle. Also this has male screw line on a nail body which is matched with the female screw line inside of the hole in right rim support (c). Base plate (f) is a simple aluminum base plate which can be modified according to users, for example, screw hole drilling, another supporting rod addition to hold cover top plate over the BPM, etc. S-BPM (a) can be safely held on the support jig not by the two contact points, such as a V-block support, but circumferential contact points between the S-band BPM (a) and Rim supports (e), (c). Jig pieces are made of aluminum except of (b) (MC Nylon ; mono cast nylon). (Turning knob (b) could be made of other metal to keep its mechanical strength.) Soft pusher (b) is made of MC Nylon to prevent some scratch on the BPM surface but with some compressive strength to fix the BPM (a). Right rim support (c) and Left rim support (e) has circumferential curvature to fix the outer rim of the BPM.
Support Jig after Assembling b d a e c f This S-band BPM with its prime support are going to be scheduled to be transported to LAPP next week.