Presentation is loading. Please wait.

Presentation is loading. Please wait.

Model “BTU” Model “BRT”  20 Gauge aluminized steel tubes  Single orifice (Model “BRT”) or multiple orifice (Model “BTU”) inshot burner  Tubes expanded.

Similar presentations


Presentation on theme: "Model “BTU” Model “BRT”  20 Gauge aluminized steel tubes  Single orifice (Model “BRT”) or multiple orifice (Model “BTU”) inshot burner  Tubes expanded."— Presentation transcript:

1

2

3 Model “BTU” Model “BRT”

4  20 Gauge aluminized steel tubes  Single orifice (Model “BRT”) or multiple orifice (Model “BTU”) inshot burner  Tubes expanded into vestibule, no welding  Heat exchanger expands and contracts evenly which aids in heat exchanger life expectancy

5  ETL certified for residential garage installations  Sizes ranging from 30 to 120 MBH  Low profile design ideal for low clearance installations  Over 82% thermal efficiency  20 gauge jacket panels with baked enamel finish  Individual removable self locking louver blades  Right hand access standard, field convertible to left hand access by flipping the unit over and remounting the hanging brackets

6

7 HHeavy duty OSHA fan guard 1115V Propeller motor wiring enclosed in flexible conduit PPower venter assembly exits through rear of the unit OOpen drip proof motor standard OOptional totally enclosed motor FField convertible to separated combustion 110 Year heat exchanger warranty

8  ETL certified for commercial & industrial applications  Sizes from 100 to 400 MBH  83% Thermal efficiency  20 Gauge jacket panels with baked enamel finish  Individual removable self locking louver blades  Interior baffles aid in heat transfer and increase outlet velocity for increased throw delivery

9  Construction of inshot rack securely holds burners on their centerline so they do not impinge on tube interior surface, a potential cause of premature heat exchanger failure  Attaches directly to the bottom of the tubular heat exchanger assembly  20 Gauge tubes expanded into the vestibule, no welding  Heat exchanger expands and contracts evenly which aids in heat exchanger life expectancy 110 Year heat exchanger warranty

10  Isolated control panel  Same propeller fans and motors utilized in the “BMEF” series units  Power venter assembly sized to the particular unit size  Direct spark ignition  Thermostat wires to an exterior terminal strip located under the control cabinet access door  Fan vent panel constructed of aluminized steel

11 30⁰ Nozzle60⁰ Nozzle 90⁰ Nozzle

12 Totally Enclosed (TE)  Open Drip Proof (ODP)

13 G1 - ONE STAGE T87K (MERCURY- FREE) THERMOSTAT WITH SUBBASE Single stage heating thermostat with subbase. Includes fan switching relay. Standard round styling suitable for any decor °F range. G2- ONE STAGE T87K (MERCURY- FREE) THERMOSTAT WITH TG511A GUARD Same features as above except a tamper proof guard is included G6 -LOCKING THERMOSTAT COVER Universal locking thermostat cover for use with all thermostats listed

14 ONE STAGE T834N (MERCURY-FREE) THERMOSTAT WITH FAN SWITCH Single stage heating thermostat with fan switch °F range. TWO STAGE TH5220D (MERCURY- FREE) THERMOSTAT WITH SUBBASE Two stage heating and two stage cooling with system and fan switching. Built in 10°F heating/cooling differential. Includes fan relay °F range.

15 ONE STAGE T6169C LINE VOLTAGE STAT WITH SUBBASE Single stage heating thermostat only. 115 volt operation. ONE STAGE T822K (MERCURY-FREE) Single stage heating only thermostat with subbase. 24 volt operation.

16 TUBULAR BLOWER UNIT HEATER

17  ETL certified for commercial & industrial applications  Sizes from 100 to 400 MBH  82+% Thermal efficiency  20 Gauge jacket panels with baked enamel finish  Individual removable self locking louver blades  Interior baffles aid in heat transfer and increase outlet velocity for increased throw delivery

18  Isolated Control Panel  Direct spark ignition  Thermostat wires to an exterior terminal strip located under the control cabinet access door  Single Stage, Two Stage and Modulating Gas Control available as option.

19  Belt Guard is Standard  Blower Motor is Open Drip Proof as standard. Optional Total Enclosed, Premium OPD and Premium TE  Power venter assembly sized to the particular unit size  10 Year Warranty on Heat Exchanger, Burners, and Flue Collector  4 Point Suspension

20  ETL certified for commercial & industrial applications  Sizes from 100 to 400 MBH  83% Thermal efficiency  Designed for Dusty, Dirty, Mildly Corrosive Environments and Areas of High Humidity and Slight Negative Pressures  Separates the Units Combustion Process from the Environment in Which the Unit is Installed by Taking Combustion Air from Outside the Contaminated Space  10 Year Warranty on Heat Exchanger, Burners, and Flue Collector

21  ETL certified for commercial & industrial applications  Sizes from 100 to 400 MBH  82*% Thermal efficiency  Designed for Dusty, Dirty, Mildly Corrosive Environments and Areas of High Humidity and Slight Negative Pressures  Separates the Units Combustion Process from the Environment in Which the Unit is Installed by Taking Combustion Air from Outside the Contaminated Space  10 Year Warranty on Heat Exchanger, Burners, and Flue Collector


Download ppt "Model “BTU” Model “BRT”  20 Gauge aluminized steel tubes  Single orifice (Model “BRT”) or multiple orifice (Model “BTU”) inshot burner  Tubes expanded."

Similar presentations


Ads by Google