We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byDraven Goodfellow
Modified about 1 year ago
ZPS Foot and Ankle Display Mini & Small Fragment Plates Cat. No. Description One-Third Tubular Plates Hole, 145mm (x2) Hole, 121mm (x2) Hole, 109mm (x2) Hole, 97mm (x2) Hole, 85mm (x2) Hole, 73mm (x2) Hole, 61mm (x2) Hole, 49mm (x2) Hole, 37mm (x2) Hole, 25mm (x2) One-Quarter Tubular Plates Hole, 23mm (x2) Hole, 31mm (x2) Hole, 39mm (x2) Hole, 47mm (x2) Hole, 55mm (x2) Hole, 63mm (x2) Straight Plates Hole, 17mm (x2) Hole, 23mm (x2) Hole, 29mm (x2) Hole, 35mm (x2) Hole, 100mm (x2) Cat. No. Description 2.0mm H-Plates Hole, 12mm (x2) 2.0 Compression Plates Hole, 22mm (x2) Hole, 27mm (x2) Hole, 32mm (x2) Hole, 37mm (x2) Hole, 42mm (x2) Hole, 52mm (x2) Hole, 62mm (x2) 2.0mm T-Plates Hole Head, 9 H Shaft, 50mm(x2) Hole Head, 9 H Shaft, 50mm(x2) 2.0mm L-Plates Left, 18mm (x2) Right, 18mm (x2) 2.0mm T-Plates mm (x2) 2.0mm L-Plates Oblique Left, 21mm (x2) Right, 21mm (x2) Top Tray
ZPS Foot and Ankle Display Mini & Small Fragment Plates Cat. No. Description Lateral Calcaneal Plates Regular Left (x2) Regular Right (x2) 3.5mm Calcaneal Plates mm (x2) mm (x2) 2.7mm L-Plates Left, 32mm (x2) Right, 32mm (x2) 2.7mm T-Plates mm (x2) 3.5mm Calcaneal Y-Plates mm (x2) 2.7mm L-Plates Oblique Left, 35mm (x2) Right, 35mm (x2) Middle Tray Cat. No. Description 2.7mm Compression Plates Hole, 20mm (x2) Hole, 18mm, Hole Space 26mm (x2) Hole, 36mm (x4) Hole, 44mm (x2) Hole, 52mm (x2) Hole, 60mm (x2) Hole, 68mm (x2) Hole, 76mm (x2) Hole, 84mm (x2) Hole, 100mm (x2)
ZPS Foot and Ankle Display Mini & Small Fragment Plates Cat. No. Description Left Bending Iron Plate Cutting Forceps Right Bending Iron Bottom 1 2 3
ZPS/ Peri II Workshop Cat. No. Description Reduction Forceps, w/serrated Jaws, 145mm Reduction Forceps, Narrow, Serrated w/points,
Mini 4-in-1 Knee Workshop Cat. No. Description lb Mallet Locking Impactor/Extractor Universal Handle
5-in-1 Knee Workshop Top Tray Cat. No. Description IM Femoral A/P Sizing Guide MICRO-MILL® Driver Adjustable IM.
Mini IM Knee Workshop Cat. No. Description Spike Arm Rod Spike Arm LPS Articular Provision, CD 5-6/Str Green 10.
MIS Uni EM/IM Knee Workshop Cat. No. Description Universal File IM Knee Drill, 8mm Dia Drill Blue, 3.2mm
Trabecular Metal™ Reverse Shoulder Instruments Cat. No.Description Base Plate Drill, 7.5mm Cortex Drill, 7.5mm Compression.
Devised, written and compiled by Ailyse Hancock Symmetry and patterns.
The reading is 7.38 mm. The reading is 7.72 mm.
NexGen® LCCK 4in1 Workshop Cat. No. Description Screw Inserter Hex Pin Driver/Extractor Femoral Augment Screwdriver.
Small Fragment LCP Set Implants & Instruments. Objectives Describe the implants found in the Small Fragment Locking Compression Plate (LCP) SetDescribe.
Counting Coins What is your strategy for counting money?
Cat. No. Description Ankle Clamp Distal Telescoping Rod Spike Arm Telescoping Rod Tibial Depth Resection.
Zimmer Unicompartmental Knee Workshop Cat. No. Description Alignment Rod w/Coupler Alignment Rod /4mm Tibial.
Anatomy of a Cabinet. Pick a cabinet now! A) A freestanding display space B) A counter section no longer than 48” (you may “cut” a counter to do this)
Organic Molecule Foldable. 1.Fold a piece of 11 x 17 paper in half the “hamburger” way and crease. Fold.
Natural Knee® II Workshop Cat. No. Description IM Tibial Alignment Guide Tibial IM Rod Modular Tibia Drill guide.
Posture: From the ground up Feet flat on the floor Feet flat on the floor Bottom on the edge of the seat Bottom on the edge of the seat Spine Straight.
FirstLight Voile Kit setup instructions.. All parts that are needed are supplied with the Firstlight Voile kit. Tools required are; 1.Protractor 2.Pencil.
Comparing DNA Aim: How can we compare organisms using gel electrophoresis? Do Now: Write two observations from your results of gel electrophoresis.
Shaft Alignment Nizwa College of Technology. Shaft Alignment Shaft alignment is the process to align two or more shafts withalignshafts each other to.
NexGen® Knee Revision Workshop Cat. No. Description
Sirus® Intramedullary Nail Workshop Cat. No.Description mm x 440mm Guide Wire (x3) Target Device for Femur Targeting.
Issa al-tobi الكلية التقنية بنزوى Nizwa College of Technology Mechanical Engineering Department SHEET METAL Done by: Issa AL-Tobi.
1 Learning Objectives The Importance Of Company Logos The Importance Of Company Image The Importance Of Packaging / Presentation Rules governing what should.
Ankle Wrap. Use a 4 inch single wrap Begin wrapping at the toes Move up towards the heart Pull wrap 1 ½ times its original length.
1 PTT 105: Engineering Graphics. 2 Cutting PlaneSection Lines Several Types of Section Drawings.
The Mouth Produced by the Riverina Schools Project Partnership 2011.
Dimensional Analysis What happens when you divide a number by itself? What happens when you divide a unit by itself? In both cases, you get the.
Relaxing on your belly! This is the prone position.
Pillowcase FACS 7. Step 1 Using a yard stick, measure/draw the body & cuff. Body: 20” by 25” Cuff: 20” by 10” Label: fold, selvage edge, top, & bottom.
By Ian Agopsowicz. Get 20 inches of copper wire (1.0 mm thick) Get one AA battery Get 6 small magnets.
© T Madas. Mathematical and Technical Drawings Bottom Side (Left) Back Front Top Side (Right)
Chapter 4: Sheet Metal Forming Shafizan Bt. Shariffuddin School of Manufacturing Engineering UniMAP 2. WORKING TOOLS AND MACHINERY.
This presentation contains a fitness regime featuring Individual Exercise Balls.
Bed Separation Single and Bunk Beds –A minimum of 6 feet separation must be maintained between beds when heads of beds are oriented in the same direction.
12.2 – Surface Area of Prisms And Cylinders. Polyhedron with two parallel, congruent bases Named after its base Prism:
Lattice Multiplication. Step 1 1)Draw a set of 2 by 2 boxes. 46 x 79 2) Cut the boxes in half diagonally. 3) Place the numbers on the outside of the boxes.
Seeing Things Through Stuff Pinhole Camera. Materials You need; Utility knife Shoe box (black or dark colours work best) Cardboard Reflect-View (best)
Chapter 7 Calcaneus Ankle. Calcaneus Os Calcis Articulates with –___________(Subtalar joint) –__________ 3 articulating surfaces (facets) –____________.
Folding Fold a paper crane Prepare a square paper.
2/14 Warm-ups Consider the surface area formula for a rectangular prism. 1.What part of the formula gives the area of the top and bottom faces? 2.What.
Middle School Medicine Ball Drill #2. EXERCISE 1: High Back Touch STARTING POSITION: Regular stance. Arms forward down. CADENCE: Slow MOVEMENT: 1.Raise.
Optimum Round Pool Instructions. Prepare the pool site Remove all the grass on a surface 2’ wider than the size of the pool Level the ground.
Ankle. Views Ap Lateral Internal and external Obliques.
BODY PLANES, DIRECTIONS, CAVITIES BODY PLANES LINE THROUGH THE BODY AT VARIOUS PARTS TO SEPARATE THE BODY INTO SECTIONS.
Open Reduction and Internal Fixation of Fractures of the Proximal Part of the Humerus by C. Spross, P. Grueninger, S. Gohil, and M. Dietrich JBJS Essent.
Orthographic Projection. Review Isometric Drawings to appear three dimensional, a 30 degree angle is applied to its sides Dimensions still stay the.
Bellwork A – 9/12/12 B – 9/13/12 What do you or your family have that measures? What does it measure? What are the units?
Fasteners Assignment Part C: 3/8-16 UNC-2A 1.5 FLAT HEAD.
Biomechanical Examination Parameters EvenKeel | Advanced Custom Orthotics™
© 2017 SlidePlayer.com Inc. All rights reserved.