1. Good Laboratory Safety Practices

2. Buddy System Be Safe! Don’t be alone when working with hazardous materials or in dangerous work conditions. Your life can depend on it!!

3. Buddy System When performing potentially hazardous/dangerous operations always: When performing potentially hazardous/dangerous operations always: –Make sure someone is in the laboratory with you –Notify someone that you are in the lab and what time you will check with them when you complete your work. –Check-in with that person if you exceed your time estimate or if you leave.

4. A Clean Lab is a Happy Lab

5. A Cluttered Lab is a Dangerous Lab! Keep your lab clean!

6. Housekeeping The Results of Poor housekeeping: Accidents Accidents –Cluttered counter tops are a good source of spills. –Poorly maintained equipment or apparatus can break spilling its contents, damage other equipment or flying debris can cause injury. –Containers and equipment on the floor are a trip and spill hazard.

7. Housekeeping The Results of Poor housekeeping: Costs you money Costs you money –Overstocking or reordering of chemicals due to uncontrolled or unmanaged inventory. –Replacing spilled chemicals or damaged equipment.

8. Housekeeping The Results of Poor housekeeping: Contaminates your research Contaminates your research –Poorly washed containers or equipment can lead to cross contamination. –Poorly labeled storage containers can lead to the use of a wrong reagent.

9. Housekeeping Poor housekeeping: Causes accidents: Causes accidents: Costs you money Costs you money Contaminates your research Contaminates your research Sets up bad habits for students entering a more regulated industrial setting. Sets up bad habits for students entering a more regulated industrial setting. Gets more attention from inspectors. Gets more attention from inspectors.

10. Don’t Block Access to Electrical Panels, Safety Showers and Eye Wash Stations

11. Don’t block doors or Fire Extinguishers

12. Unattended Bunsen burner causes bench fire. Never leave lit Bunsen burners unattended or use flammable solvents near them.

13. Old Equipment Can Be Dangerous Rusty water-bath with exposed wires Maintain your Equipment!

14. Improper Chemical Storage Ether was stored in this domestic style refrigerator. Either the thermostat or the interior light was the ignition source that caused the explosion. Ether was stored in this domestic style refrigerator. Either the thermostat or the interior light was the ignition source that caused the explosion. Flammables have to be stored in a Flammables or Explosion proof fridge. Flammables have to be stored in a Flammables or Explosion proof fridge.

15. Read labels before pouring containers Or this ……turns into this.

16. Lack of Attention to Details Heater/stir plate being used to stir only accidentally was also turned on as hot plate also!

17. Incomplete reaction placed in refrigerator – BANG! See the glass imbedded In the door? Reaction container was placed into the refrigerator before the reaction had been completely quenched. The bottle over pressurized and exploded.

18. Do Not Store Consumables with Chemicals!

19. Proper Equipment Usage There needs to be a written Standard Operating Procedure for all equipment. There needs to be a written Standard Operating Procedure for all equipment. Everyone should be properly trained before using any equipment. Everyone should be properly trained before using any equipment. Improperly used or maintained equipment can be dangerous to your health or can result in expensive damages. Improperly used or maintained equipment can be dangerous to your health or can result in expensive damages. Fires are common result with inappropriate equipment usage. Fires are common result with inappropriate equipment usage.

20. Centrifuges- An Example of Improper Usage and Maintenance

21. Hazards Mechanical failure of rotating parts (often violent). Mechanical failure of rotating parts (often violent). Contact with rotating parts. Contact with rotating parts. Sample leaks causing aerosols, stress corrosion, contamination. Sample leaks causing aerosols, stress corrosion, contamination. Sample imbalance causing machine movement / walking (or stress failure of component parts). Sample imbalance causing machine movement / walking (or stress failure of component parts). Fire or explosion. Fire or explosion. Health (contact with contaminated components / vapors). Health (contact with contaminated components / vapors). Ergonomics/lifting Ergonomics/lifting

22. Rotor Failure

25. Contained Rotor Failure

26. Dancing Centrifuge This can be caused by an improperly balanced rotor.

27. Remember Good Practices Never work alone. Never work alone. Commit to good housekeeping Commit to good housekeeping Do not block access to doors, electrical or emergency equipment Do not block access to doors, electrical or emergency equipment Store chemicals and wastes properly Store chemicals and wastes properly Maintain equipment Maintain equipment

28. The End 12/2/14