1. Learn how to use Shiva STEP BY STEP

2. Step_1 HOW TO INSTALL THE APPLIANCE YOU CAN LEAVE IT ON A COUNTER OR ON STANDS

3. OR EVEN PUT IT ON THE WALL Step_1 HOW TO INSTALL THE APPLIANCE

4. Step_2 CHECKING THE VOLTAGE THE APPLIANCE IS NOT BIVOLT!

5. Step_2 CHECKING THE VOLTAGE PAY ATTENTION AT THE STICKER ON THE WIRE YOU CAN FIND THE SAME INFORMATION ON THE BOX

6. Step_3 PREPARING TO USE THE APPLIANCE OPEN THE FRONT COVER AT THE TOP POSITION THE COVER STAYS OPEN AND LOCKED

7. IF YOU WANT TO REPEAT THE PROCESS OR MAKE ANOTHER ONE IN A ROW YOU CAN ADD MORE WATER IN THE RECIPIENT Step_3 PREPARING TO USE THE APPLIANCE PUT TAP WATER IN THE CONTAINER APPROXIMATELY 100ml

8. Step_4 PUTTING THE HAIR BRUSHES INSERT THE HAIR BRUSHES INTO THE APPLIANCE

9. IF YOU WANT YOU CAN ALSO PUT SOME COMBS AND ANOTHER ACESSORIES TOO. Step_4 PUTTING THE HAIR BRUSHES THE APPLIANCE IS DESIGNED TO DISINFECT THREE BRUSHES ON EACH CICLE

10. Step_5 TURNING THE SHIVA ON CLOSE THE FRONT COVER TURN SIDE KNOB CLOCKWISE DIRECTION

11. Step_5 TURNING THE SHIVA ON EACH CYCLE LASTS 5 MINUTS. THE TIMER WILL AUTOMATICALLY TURN OFF IN THE END OF THE PROCESS. YOU´LL REALIZE THAT A RED LIGHT TURN OFF IN THE FRONT OF THE APPLIANCE

12. READY! THE DESINFECTION PROCESS IS DONE.

13. IT’S IMPORTANT TO DESINFECT THE HAIRBRUSHES ALL TIMES BEFORE USE THEM. THAT HABIT AVOID ANY DISEASES RISKS

14. Step_6 CLEANNING THE APPLIANCE YOU CAN CLEAN IT WITH A CLOTH OR EVEN WITH A PAPER TOWEL.

15. IF YOU WANT YOU CAN ALSO CLEAN THE HEATER ATENTION! YOU MUST WAIT THE RESISTANCE TO COOL DOWN. AVOID RISKS OF SKIN BURN OUT Step_6 CLEANNING THE APPLIANCE

16. IF YOU HAVE ANY DOUBTS TAKE A LOOK AT THE HANDBOOK.

17. YOU MIGHT HAVE THIS DIFFERENTIAL IN YOUR BEATY SALON