We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byBrenna Kier
Modified over 2 years ago
© Easy Guides Australia a work platform consisting of a work basket (platform), lifting mechanism and chassis that can raise and lower people and materials. They are commonly used when work must be done at a height without conventional access. A Scissor Lift is: This is not a boom-type elevating work platform. Scissor lifts are hydraulicly raised and lowered on linked, folding supports that draw together to lift the work platform. [See seperate guide for Boom Type Elevating Work Platform. A boom length of 11m or more requires a license.] The information in this show is for operating a Scissor Lift.
© Easy Guides Australia Platform Controls Basket / Platform Notice Signs (Decals) Ground Controls Wheels / Tyres Chassis Pothole Protection System SWL Scissor Arms Safety Prop Access Ladder Stabilisers Example of a Scissor Lift
© Easy Guides Australia Rated Capacity / Safe Working Load (SWL) Add the weight of the gear, the tools and the personnel together to determine the allowable load of the scissor lift. The answer must not exceed the SWL (Safe Working Load) of the scissor lift. 40 kg The gear 20 kg The tools 80 kg The people 140 kg SWL 200 kg combined weight of load For example: + + = Or Less than SWL Rated Capacity / Safe Working Load (SWL)
© Easy Guides Australia Avoid Falls and Tip-overs Accidents such as these can cause significant injury or death. Always be aware of the area around you and operate the scissor lift carefully when working around loading bays, docks or any other raised areas. Keep away from the edge of docks and ramps. Jolting from uneven surfaces is greater at the platform. BE ALERT
© Easy Guides Australia Entering the Platform Enter the platform only when it is fully lowered or when there is an approved landing area. Always face scissor lift and have 3 point contact while mounting or dismounting. NEVER CLIMB THE SCISSOR ARMS TO REACH THE PLATFORM.
© Easy Guides Australia A boom-type elevating work platform means; a powered telescoping device, hinged device or articulated device or any combination.
Standard 29 CFR Part Vehicle Mounted Elevating and Rotating Work Platforms.
FHM TRAINING TOOLS This training presentation is part of FHM’s commitment to creating and keeping safe workplaces. Be sure to check out all the training.
Copyright Progressive Business Publications Forklift Safety.
Boom Lift and Scissor Lift UNIVERSAL STUDIOS
Scissor Lift Safety Training Working Safely on Scissor Lifts 29 CFR OSHA Scaffolding Safety Requirements.
© Easy Guides AustraliaQLD Vet Edition New Queensland Licensing Pathway MAIN MENU Introduction SECTION 1 – Pre-operational checks SECTION 2 – Site / Job.
Safety on Call SLIPS, TRIPS & FALLS - WORKING ON & AROUND COMMERCIAL MOTOR VEHICLES.
OSHA Susan Harwood Training - AGC Fall Protection Susan Harwood Grant Training Program 2013 Scaffolds, Ladders and Lifts.
Lift Safety EZ Up 10’ Lift. Training Objectives Identify lift hazards Understand OSHA equipment requirements Know how to inspect equipment Take.
UNIVERSITY of N ORTHERN C OLORADO. To move forward press enter or the down arrow key To view the previous slide press backspace or the up arrow key.
Addressing the most preventable causes of serious injury and death.
Scissor Lift Safety Training
Falls cause 15% of all accidental deaths at the workplace, second only to motor vehicles. Ladders are commonly used to accomplish elevated work tasks and.
Pay attention. Simple Machines Simple machines assist us in doing work by creating a mechanical advantage. They do not change the amount of work; they.
Slide 1 (of 15) Aerial Lift Safety in Construction Michael McCann, PhD, CIH Director of Safety and Ergonomics The Center to Protect Workers’ Rights
Powered Industrial Trucks: Forklifts—Overhead Transparencies © 1998 Comprehensive Loss Management, Inc. 1 Powered Industrial Trucks.
1 The purpose is to prevent falls and reduce the consequences if a fall occurs when Working At Height. Use fall protection equipment when working outside.
University of Wisconsin Eau Claire By: Chaizong Lor
AERIAL LIFTS. Purpose:Lifts are a better way to reach overhead areas and are safer than ladders. However, there are safety precautions that must be followed.
Procedure for use of Zarges ZAP scaffold (Revision 0 – 5 th April 2011) Toolbox talk.
© Business & Legal Reports, Inc Alabama Retail is committed to partnering with our members to create and keep safe workplaces. Be sure to check out.
© BLR ® —Business & Legal Resources 1408 Aerial Lift Safety.
Safe use of remote controls. Points of note Short video.
Rollover Protective Structures On Tractors Module One The Real Reasons For ROPS.
V8 Working at height and the prevention of falls from vehicles.
Rev: Section 5 Ladders and Scaffolding. Rev: Learning Objectives: Section 5 Determine the proper ladder to use based on weight capacity.
Aerial and Scissor Lift Safety
1 Falls Module 3. 2 DISCLAIMER This material was produced under grant number SH from the Occupational Safety and Health Administration, U.S. Department.
© Easy Guides Australia A Pallet Truck is: a truck designed to lift and transport goods on a standard pallet or platform. They can be manually or power.
Health & Safety Life Book AM ST p. 1 v.01 - Nov. 03, 2011 Working at Height Scissor lift, Boom lift and Vehicle mounted platforms Design Specifications.
Rev: Section 4 Roofing Operations. Rev: Roofing Operations When installing shingles and other roofing material, use a PFAS. Check manufacturer.
Hoist Lifting it Right.
Loader/Backhoe Safety Training
OSHA’s Fall Prevention Campaign
Slips and Falls AMS 2005 Tech App Information Provided by: Texas Workers’ Compensation Commission.
Copyright Progressive Business Publications 1 Forklift Safety.
The information in this show is for operating a Forklift Truck
Rollover Protective Structures On Tractors Reasons for ROPS December, 2010.
Ladder Safety Importance of Ladder Safety Any fall can be serious, and a fall from the height of even a low ladder can mean a painful and incapacitating.
Harkness Career Center
Warehouse Safety. © Business & Legal Reports, Inc Session Objectives Identify warehouse hazards Prevent back injuries Work safely with material-handling.
Leaning Ladder & Stepladder Safety
1 Fork-2 FORKLIFT SAFETY AWARENESS. 2 Fork-2 INTRODUCTION Forklifts are very useful for moving raw materials, tools and equipment in many industries including.
CHAPTER 14 Copyright © 2007 Thomson Delmar Learning 14.1 Ladders.
MU Aerial Lift Building Training
Aerial Lifts University of Wisconsin Eau Claire By: Chaizong Lor.
CHAPTER 14 LADDERS Copyright© Delmar is a division of Thomson Learning.
© 2017 SlidePlayer.com Inc. All rights reserved.