T10 Series Extrusion (1010) 1”square, sold primarily in 8’ lengths Uses 80/20’s 6105-T5 alloy to achieve: Yield strength of 35,000 lbs/sq. in Tensile strength of 38,000 lbs/sq. in Superb straightness and very low twist, even at 20 ft lengths. Weight – ½ lb/ft. Vibration proof – locks nuts in, making it virtually impossible to vibrate loose. Modular T-slot system allows fast and strong assembly.
T-Nut (3382, 3280, 3287) Available in stainless steel, hardened high- carbon steel, and zinc plated steel. Compatible with T10 and T15 series extrusion. ¼-20 Thread size. Strong, sturdy, and easy to use. Slides inside T-slot. Double, triple, and custom hole t-nuts available.
Drop-In T-nuts (3376) Add T-nuts, and other components to an extrusion when ends cannot be accessed. Rubber nub holds nut in to slot, and provides a handle for removal. Available in all materials as T-nut.
Anchor Fasteners (3395) For making 90 o angles. Zinc casting with lacquer finish. Incredibly strong, single anchor holds 500 lbs of direct force, and 250 lbs of cantilevered force. Strongest type of fastener 80/20 sells. Requires drilling of counterbore, 9/16in
Joining Plates (4115, 4136, 4141) Precision machined from anodized 6105- T5 alloy. Strong, lightweight, requires virtually no machining. Easy to assemble and use very precisely. 1540 uses 3 main types: 4 hole corner (4115) holds 325lbs, 75lbs, gusseted 4 hole (4136) holds 325lbs, 220lbs, and 4 hole tee joining plate (4141).
Quickframe Extrusion (9000) 1” square Made from Anodized 6105-T5 Very Lightweight, ¼ lb/ft Interior is grooved for superior hold to nylon connectors.
Quickframe Nylon Connectors (Various model numbers) 2, 3, 4, and 5 way nylon connectors End caps Conversion tee to convert to T10 extrusion. An enormous selection of strong and lightweight connectors for every application.