1. w w w. r e d l i n e c o m m u n i c a t i o n s. c o m R e d l i n e C o m m u n i c a t i o n s AN-50(e) PMP v3.0 Configuration Notes

2. 2Redline Confidential Dept 1 Dept 2 Dept 1 VLAN capable switch VLAN capable switch Router SC SS1 SS2 SW1 SW2 Site 1 Site 2 Site 3 AN-50 Link-Group-Connection - I Link Connection Group Create Link Create Group Create Connection

3. 3Redline Confidential Link – wireless link Wireless path between one SC and one SS SS MAC address DL burst rate, UL burst rate Group – logical, multicast domain Made up of SS connections assigned to the group How packets of this group gets treated at SC Ethernet port Tagged or untagged at SC What QoS level is assigned for the groups multicast traffic Connection – logical user data flow between SC and SS A connection belongs to a group and a link What QoS level is assigned to this connection How packets of this connection are treated at SS Ethernet port Tagged or untagged at SS Link-Group-Connection - II

4. 4Redline Confidential V3.0 configuration notes Max # of SSs per sector is 20 Max # of groups per sector is 30 Max # of connections (VIDs) per link is 12 Max # of MAC addresses per group is 4000 Max # of IDs (link, group, connection) per sector is 1000 Each connection (VID) must belong to one group and one group only Each connection (VID) must belong to one link and one link only Each group can have only one connection (VID) at a subscriber or section controller A pass-through group is used to pass untagged packets and tagged, but undefined packets There can be only one pass-through group at a SC There can be only one pass-through connection at a SS QoS setting – see separate doc for details

5. 5Redline Confidential 802.1p priority setting - I Default priority 802.1p bits are used only for tagged egress packets from a pass-through ingress port SC SS AN-50 Pass-through Tagged 802.1p Group Default SC SS AN-50 Pass-through Tagged 802.1p Connection Default

6. 6Redline Confidential 802.1p priority setting - II Default priority value is ignored if packets are tagged on ingress port, in which case the.1p bits in the tag will be used at the egress port SC SS AN-50 Tagged 802.1p SC SS AN-50 Tagged 802.1p Tagged 802.1p bits

7. 7Redline Confidential Useful references VLAN Information http://net21.ucdavis.edu/newvlan.htm VLAN White paper - Avaya http://www1.avaya.com/enterprise/whitepapers/vlan-tutorial.pdf Tutorial on VLANs - CommsDesign http://www.commsdesign.com/showArticle.jhtml?articleID=26806942 IEEE 802.1Q Standard http://standards.ieee.org/getieee802/download/802.1Q-1998.pdf AN-50e User Manual AN-50e PMP Quick Configuration Guide