Presentation is loading. Please wait.

Presentation is loading. Please wait.

NEW ANALYTIC DC MODELS FOR TUNNEL DIODE AND RESONANT TUNNELING DIODE Chien M. Ta (SMA) Fujiang Lin (IME) Subhash R. Chander (IME) SYMPOSIUM ON ELECTRONICS.

Similar presentations


Presentation on theme: "NEW ANALYTIC DC MODELS FOR TUNNEL DIODE AND RESONANT TUNNELING DIODE Chien M. Ta (SMA) Fujiang Lin (IME) Subhash R. Chander (IME) SYMPOSIUM ON ELECTRONICS."— Presentation transcript:

1 NEW ANALYTIC DC MODELS FOR TUNNEL DIODE AND RESONANT TUNNELING DIODE Chien M. Ta (SMA) Fujiang Lin (IME) Subhash R. Chander (IME) SYMPOSIUM ON ELECTRONICS June 2004

2 June 04, 2004Symposium on Electronics Outline Introduction Literature reviews Approach and tools Achievements Remarks and discussions

3 June 04, 2004Symposium on Electronics Introduction Motivations –UWB system design –Currently, no RTD’s model in commercial EDA tools Objectives –Analytic expressions for the I-V characteristic curves of TD and RTD

4 June 04, 2004Symposium on Electronics Reviews Existing models – Piecewise linear model (Tai-Haur Kuo et al., Ralph P. Santoro) – Polynomial fit model (M. R. Deshpande et al.) – Gaussian-exponential combination (Zhixin Yan and M.J.Deen) – Physics-based model (J. N. Schulman et al.) I-V characteristic What are the interesting features of tunnel diode and resonant tunneling diode? Negative differential resistance (NDR) Fast Temperature insensitivity

5 June 04, 2004Symposium on Electronics Modeling Analytical approach Tools: MATLAB, IC-CAP

6 June 04, 2004Symposium on Electronics Methodology I-V characteristic measurement Mathematic analysis Model proposal Simulation Compare Final model Satisfactory match Unsatisfactory match

7 June 04, 2004Symposium on Electronics TD modeling - Measurement IC-CAP setup for measuring I-V characteristic Measured I-V characteristic

8 June 04, 2004Symposium on Electronics Analytic model where I s_rev n rev IpVpAIpVpA I s_fwd n fwd I-V characteristic

9 June 04, 2004Symposium on Electronics Simulation ParameterExtracted valueOptimized value I s_rev x x n rev I s_fwd x x n fwd VpVp 80 x x IpIp x x A Final RMS error = 0.95% Maximum error = 2.28% I-V characteristic with extracted valuesI-V characteristic with optimized values

10 June 04, 2004Symposium on Electronics New model for resonant tunneling diode where I-V characteristic ISnISn AA

11 June 04, 2004Symposium on Electronics Simulation ParameterOptimized values A652.7x10 -9    ISIS x n Final RMS error = 3.813% Simulation result

12 June 04, 2004Symposium on Electronics Symmetric characteristics for RTD where Simulation result Symmetric I-V characteristic

13 June 04, 2004Symposium on Electronics One model for both TD and RTD ? ParameterOptimized values A831.3x10 -6    ISIS 108.9x10 -6 n7.146 Final RMS error = 1.03% Recognizable deviation in the reverse-biased region (not very critical since the devices are usually biased in the NDR region) Not much degradation compared to 0.95% RMS error of the TD’s model

14 June 04, 2004Symposium on Electronics Remarks, conclusion, and future works Remarks –Excellent match between simulation and measurement: RMS error is less than 1% for TD and 3.8% for RTD –Need accurate measurement, especially for ac modeling: de-embedding technique –Need modification to have scalability Conclusion –The new DC model for the RTD is sufficient to describe the behaviors of the devices Future works –AC model expansion –Implementation into EDA tools –Coding in Verilog-A

15 June 04, 2004Symposium on Electronics THANK YOU


Download ppt "NEW ANALYTIC DC MODELS FOR TUNNEL DIODE AND RESONANT TUNNELING DIODE Chien M. Ta (SMA) Fujiang Lin (IME) Subhash R. Chander (IME) SYMPOSIUM ON ELECTRONICS."

Similar presentations


Ads by Google