Presentation is loading. Please wait.

Presentation is loading. Please wait.

HT-7715DNV IR DAY/NIGHT CAMERA SPLIT GLASS TECHNOLOGY BUILT-IN LEDS & CDS SENSOR BUILT-IN HEATER/WEATHERPROOF DESIGN INDEX PACKAGE CONTENTS -----------------------------------------------

Similar presentations


Presentation on theme: "HT-7715DNV IR DAY/NIGHT CAMERA SPLIT GLASS TECHNOLOGY BUILT-IN LEDS & CDS SENSOR BUILT-IN HEATER/WEATHERPROOF DESIGN INDEX PACKAGE CONTENTS -----------------------------------------------"— Presentation transcript:

1 HT-7715DNV IR DAY/NIGHT CAMERA SPLIT GLASS TECHNOLOGY BUILT-IN LEDS & CDS SENSOR BUILT-IN HEATER/WEATHERPROOF DESIGN INDEX PACKAGE CONTENTS PRECAUTIONS PRODUCT FEATURES CAMERA INSTALLATION FOCUSING DESCRIPTION OF OPERATION ~7 CAMERA PARTS FUNCTION SELECTION SWITCH ~13 DIMENSION SPECIFICATION WARRANTY New Highway Amityville, NY

2 PRECAUTIONS PACKAGE CONTENTS 1 - HT-7715DNV CAMERA 1 - SUNSHIELD ACCESSORIES: 4 - MOUNTING SCREWS 1 – M2.6 WRENCH(L" TYPE) 1 - VIDEO TEST CABLES INSTALLATION SHOULD BE PERFORMED BY QUALIFIED PERSONNEL PLEASE USE A UL APPROVED REGULATED 24 VOLT AC OR 12 VOLT DC POWER SUPPLY PLEASE USE APPROPRIATE LOW VOLTAGE POWER CABLE TO PREVENT FIRE OR ELECTRICAL SHOCK. PLEASE INSURE THAT YOUR INSTALLATION AREA CAN SUPPORT THE WEIGHT OF THE CAMERA. PLEASE HANDLE THIS CAMERA CAREFULLY: - DONT USE A STRONG OR ABRASIVE DETERGENT WHEN CLEANING THE CAMERA. - USE A SOFT TISSUE OR LENS CLOTH TO CLEAN THE FRONT GLASS - DONT EXPOSE THE CAMERA TO DIRECT SUN

3 CONNECT POWER CABLE 1. WHEN USING 12 VOLTS DC (constant voltage 600 mA) 2. WHEN USING 24 VOLTS AC (40 Volt Amps) 3. CONNECT VIDEO CABLE -CONNECT BNC CABLE TO THE BNC JACK. CAMERA INSTALLATION adapter(DC 12V 800mA)constant voltage CONNECT Weatherproof operation Controls for BLC, ELC, F/L and L/L Dual voltage operation 1/3" SONY EXVIEW CCD sensor Auto Iris DC Vari-Focal lens (4mm-9mm) Split Glass Technology to avoid reflections Excellent low light level performance Video Test Connector for easy installation Lux level dip switch adjusts day/night settings to your requirements Built-In Heater extends operating range and avoids condensation Cable through the mount for extra security Built-In 11 IR LED'S & CDS sensor for day/night performance Note : Specifications are subject to change without notice PRODUCT FEATURES BLACK:(-) POWER RED(+) BLACK:(-) POWER RED(+)

4 FOCUSING How to operate 1. SET THE DISTANCE AND FOCUS BY CONTROLLING THE ZOOM ANDFOCUS LEVERS. 2. CONNECT THE VIDEO AND POWER CABLES How to connect 1. Single system 2. Multiple Camera System Description of Operation - Wiring Diagram POWER 1.OPEN THE CASE BY UNSCREWING IT FROM THE BODY. 2.SET THE CAMERA AT A DISTANCE YOU WANT BY USING THE ZOOM CONTROLLER.(4-9mm) 3.CONTROLL THE FOCUS BY USING THE FOCUS CONTROLLER. 4.LOCK BOTH INTO POSITION BY USING THE SET-SCREWS AFTER ADJUSTMENTS ARE MADE.

5 Description of Operation - Wiring Diagram 3. DVR system POWER Camera Parts (1) HEATER (2) IR LED (3) DC IRIS LENS (1)HEATER BUILT- IN HEATER TO PREVENT MOISTURE AND CONDENSATION AUTOMATIC CYCLING (2) IR LEDS INFRARED LEDS ACTIVATE AS NEEDED. (3) DC AUTO IRIS LENS ADJUST BETWEEN T W (TELE WIDE) TO SET THE ANGLE (FOCAL LENGTH) SET THE FOCUS BY ADJUSTING N NOTE: BOTH OF THE ABOVE ADJUSTMENTS GET LOCKED INTO POSITION THROUGH THE USE OF "LOCKING HANDLES".

6 Function Selection Switch (5) LUX DIP SWITCH (1) VIDEO TEST TERMINAL (4) Function DIP SWITCH (1) VIDEO TEST TERMINAL ALLOWS THE CONNECTION OF A LOCAL MONITOR TO MAKE INITIAL ADJUSTMENTS TO THE CAMERA (2) V-PHASE LEVEL WHEN DESIRED, THE VERTICAL PHASE MAY BE ADJUSTED TO SYNCHRONIZE THE VERTICAL PHASE OF THE CAMERA WITH OTHER CAMERAS IN THE SYSTEM. THIS FEATURE IS ONLY AVAILABLE IN 24 VOLT AC OPERATION. (3) DC IRIS LENS LEVEL FINE TUNE THE AUTO IRIS LENS (2) V-PHASE ADJ. (3) DC IRIS LEVEL ON (3) Function DIP SWITCH 1.ALC 2.BLC 3.F/L 4.L/L ON (4) LUX DIP SWITCH 1SETP 2SETP 3SETP 4SETP Function Selection Switch - Default setting-The function selection switches are factory set as below

7 Function Selection Switch ON (3) DIP SWITCH 1.ALC 2.BLC 3.F/L 4.L/L ALC- Automatic light compensation. -Auto iris Lens control/mechanical iris lens on/off function ON : Camera is in Electronic Shutter Mode OFF: Electronic Shutter is fixed at 1/60 and Auto Iris mode is active Switch Mode Function Function Selection Switch. BLC-Back light compensation. -BLC ON/OFF FUNCTION BLC: If there is a strong light behind an object the object may appear as a shadow. Activating the BLC will minimize this effect. The coverage of the BLC is center plus bottom as below =FIX. F/L- Flicker Less -F/L ON/OFF FUNCTION ON : Use when the lux changes often OFF: Use under normal circumstances. L/L- Line Lock - L/L ON/OFF FUNCTION - Locks the camera to the 60 Hz of the wall outlet. - Only operates in the 24 Volt AC mode

8 Function Selection Switch ON (4) LUX DIP SWITCH 1 STEP 2 STEP 3 STEP 4 STEP. LUX DIP SWITCH. Tells the camera when to switch to the B/W night mode. Note: Only one switch can be in the on position at a time. #1 - The camera will switch at 1/2 lux #2 - The camera will switch at 1 lux #3 - The camera will switch at 3 lux #4 - The camera will switch at 5 lux DIMENSION

9 SPECIFICATION IMAGE SENSOR1/3 SONY EX-VIEW CCD TV SYSTEMNTSC SCANNING SYSTEM2:1 INTERLACE SYNC SYSTEMLINE LOCKED/ADJUSTABLE V-PHASE LINE LOCK /INTERNAL ON-OFF RESOLUTION470LINES MINIMUMILLUMINATION0.03 LUX (IR OFF) / 0.00 LUX (IR ON) CDS SENSORPHOTOCONDUCTIVE CELLS S/N RATIOMORE THAN 60dB GAMMA CHARACTERISTIC0.45 VIDEO OUTPUT1.0 V p-p into 75 ohms Composite Video ELECTRONIC SHUTTER1/60-1/100,000 sec POWER SUPPLY24 VOLTS AC, 12 VOLTS DC – DUAL VOLTAGE POWER CONSUMPTION600mA LENSDC AUTO-IRIS VARIFOCAL LENS(4mm-9mm) OPERATIONAL TEMPEATURE-20 deg F to +122 deg F – RH 95% STORAGE TEMPEATURE-30 deg F to +140 deg F WEIGHT1 POUND WARRANTY


Download ppt "HT-7715DNV IR DAY/NIGHT CAMERA SPLIT GLASS TECHNOLOGY BUILT-IN LEDS & CDS SENSOR BUILT-IN HEATER/WEATHERPROOF DESIGN INDEX PACKAGE CONTENTS -----------------------------------------------"

Similar presentations


Ads by Google