1. Go into SATURN/P1X

2. Steps in Creating a DRACULA Network from a SATURN Model

3. Cordon/Cut line

4. Save Network.dat (for SATNET) to file testcod.dat

5. Save trip Matrix to file testcod.ufm

6. Save the trip matrix with Actual Flows

7. Then follow the steps below: - Quit P1X - Run SATNET testcod and get output testcod.ufn - Run SATURN testcod testcod and get testcod.ufs and testcod.ufc files - Run SATPIG testcod testcod and get testcod.lpg file which contains the assigned routes and route flows - Rename testcod.dat testcod.net - Run DRACULA pre-processor program DRACPREP - Run DRACULA microsimulation program DRACSIM

8. List of the files for the cordoned network

9. Run DRACPREP

10. Finished pre-processing of testcod network successfully

11. Run DRACSIM on the cordoned network testcod.net

12. Select an area to enlarge, using menu View/Box