Presentation is loading. Please wait.

Presentation is loading. Please wait.

CNC- Machining Centers Optional Aggregates. Aggregates nHigh torque through optimized gears nLittle wear due to precise high quality bearings and special.

Similar presentations


Presentation on theme: "CNC- Machining Centers Optional Aggregates. Aggregates nHigh torque through optimized gears nLittle wear due to precise high quality bearings and special."— Presentation transcript:

1 CNC- Machining Centers Optional Aggregates

2 Aggregates nHigh torque through optimized gears nLittle wear due to precise high quality bearings and special hardened surfaces of the gears nModular design for best flexibility

3 Optional Aggregates Available Spindles Drilling Spindles Drilling, Saw Shaping 7950 Floating head Spindle Drilling, Saw, Shaping Spindles Drilling, Shaping 7855 / 7856 / 7857 VarioNC (4 ½ Axes) Drilling, Saw Shaping

4 Optional Aggregates Available Spindle Saw unit (heavy duty) Spindles Drilling, Saw Shaping Spindles Lock case Moulding (Omega) Spindles Lock case, Shaping Spindle Saw, Shapeing Spindles Drilling, Shapeing

5 Optional Aggregates Available Spindle Drilling, Saw Shapeing Spindles Drilling (Horizontal) Spindle Drilling, Saw Shaeping (45° fixed) Spindle Saw NC collet chuck drilling Saw with scoring unit

6 Optional Aggregate # 7853 Data sheet

7 Optional Aggregates # 7853 nHSK-F 63 collet chuck nDrilling nTransmission ratio: 1:1,48 n9,000 rpm n3+1 spindles for collet chuck - 0,5 – 10 mm, ER16 nDrill bits with effective length up to 130 mm nDrill centers in 32 mm grid n3x clockwise and 1x counterclockwise nRotatable from 0° - 360°

8 Optional Aggregates # 7854 Datenblatt

9 Optional Aggregaqtes # 7854 nHSK-F 63 collet chuck nTransmission ratio: 1:1,48 n9,000 rpm n2 spindles with collet chucks 1–16 mm, ER25 / 3–20 mm, ER32 nWith saw blade mount –D = max. 220 mm, d=30 mm –2 x driving pins, d=6 mm nRotatable 0° - 360°

10 Optional Aggregates VarioNC VarioNC 7855 (collet chuck/ saw blade mount) VarioNC 7856 (Saw blade mount) VarioNC 7857 ( ET Clamping system )

11 Optional Aggregates VarioNC nFor machining workpiece in free plane nWorkpiece positioning by –Turning (C-axis 0° - 360°) –Inclining (A-axis 0° - 100°) nPositioning of axis results from one after another (A- and C-axis) All positioning operations are always performed outside the machining operation.Interpolation during machining is not possible.

12 Changing Units (Option) Turning mitre gear drive 7855 Datenblatt

13 Changing Units (Option) Turning mitre gear drive 7855 nwith HSK-F 63 collet chuck nTransmission ratio: 1:1,09 nN out (max.) rpm n1 spindles with collet chuck mm, ER25 mini nWith saw blade mount d = 30 mm, max. Ø 200 mm nPivot range 0° - 100° nRotable from 0° - 360° nOil bath lubrication Variant-Packages

14 Changing Units (Option) Turning mitre gear drive 7856 Datenblatt

15 Changing Units (Option) Turning mitre gear drive 7856 nwith HSK-F 63 collet chuck nTransmission ratio: 1:1,09 nn out (max.) min -1 n1 spindles with saw blade mount d = 30 mm, max. Ø 200 mm nPivot range 0° - 100° nRotable from 0° - 360° nOil bath lubrication Variant-Packages

16 Changing Units (Option) Turning mitre gear drive 7857 Datenblatt

17 Changing Units (Option) Turning mitre gear drive 7857 nwith HSK-F 63 collet chuck nTransmission ratio: 1:1,09 nn out (max.) rpm n1 spindles with collet chuck = 30 mm, max. Ø 200 mm nPivot range 0° - 90° nRotable from 0° - 360° nOil bath lubrication Variant-Packages

18 Changing Units (Option) VarioNC Variant-Packages Vector axis (C-axis) 0°-360° can be turned infinitely Tool changer /14 /16-fold-Magazin Pick-up Max. Ø tool: > Space 1- 7: Ø 100 mm > Space 8-14: Ø 110 mm Maximum tool weight: > 5 kg per tool > 60 kg when full For collect chuck with HSK shank 1x VarioNC angle pivoting gear selectable from: 7855 / 7856 / 7857 Variant 1 Vector axis (C-axis) 0°-360° can be turned infinitely Tool changer fach-Magazin - Pick-up Max. Ø tool: > Ø 200 mm Maximum tool weight: > 6 kg per tool For collect chuck with HSK shank 1x VarioNC angle pivoting gear choosable from: 7855 / 7856 / 7857 Variant 2

19 Changing Units (Option) Floating head with head cone 7950

20 Changing Units (Option) Floating head with head cone nFloating head 7950, with HSK 63 F shaft –n out (max.) 10,000 rpm –with collet chuck of mm, ER25 –tracer machining nFloating head cone –with inside diameter 110 mm –with inside diameter 65.5 mm (for floating head 7950)

21 Changing Units (Option) Turning mitre gear drive 7953 Datenblatt

22 Optional Aggregates # 7953 nWith HSK 63 F collet chuck nTransmission ratio: 1:1 n15,000 rpm nPivot range 0° - 100° nWith adjusting bolts with marked angle positions nRotateable from 0° - 360° (manual adjustment)

23 Optional Aggregates # 7953 nWith collet chuck –1–16mm, ER25 nWith saw chuck –D = max. 180 mm, d = 30 mm nMaintenance-free

24 Optional Aggregates # 7954 Datenblatt

25 Optional Aggregates # 7954 nWith HSK 63 F collet chuck nTransmission ratio: 1:1.48 n15,000 rpm nRotateable from 0° - 360° (manual adjustment) n2 spindles with collet chucks 1–16mm, ER25 nDrill bits effective length up to 130 mm n1x clockwise and 1x anticlockwise nMaintenance-free

26 Optional Aggregates # 7955 Datenblatt

27 Optional Aggregates # 7955 nWith HSK 63 F collet chuck nTransmission ratio: 1:0.676 n10,000 rpm nRotateable from 0° - 360° (manual adjustment) nWith saw blade mount –D = max. 220 mm, d=30 mm –2 x driving pins, d=6 mm nWith self-securing clamping cover d = 56mm nOil bath lubrication

28 Optional Aggregates # 7956 Datenblatt

29 Optional Aggregates # 7956 nWith HSK 63 F nTransmission ratio: 1:1.48 n15,000 rpm nRotateable from 0° - 360° (manual adjustment) nwith collet chucks 1–16mm, ER25 nWith saw blade mount –D = max. 160 mm, d=30 mm –4 x fixing screws nMaintenance-free

30 Optional Aggregates # 7957 Datenblatt

31 Optional Aggregates # 7957 nWith HSK 63 F nTransmission ratio: 1:1.48 n15,000 rpm nRotateable 0° - 360° (manual adjustment) nMaintenance-free n4 spindles unit with collet chucks –2 x 1–16mm, ER25 / 2 x 3 – 20 mm, ER 32 n2 x clockwise and 2 x counterclockwise nSaves valuable change-over time

32 Optional Aggregates # 7958 Datenblatt

33 Optional Aggregates # 7958 nWith HSK 63 F nLock case / cutting nTransmission ratio: 1:1 n12,000 rpm n1 spindle unit for tool shaft d = 16mm nCounterclockwise rotation nMax. workpiece thickness 60 mm nMaintenance-free

34 Optional Aggregates # 7959 Datenblatt

35 Optional Aggregates # 7959 nWith HSK 63 F nTransmission ratio: 1:1.48 n15,000 rpm n2 spindles unit with –collet mount 2–20 mm, ER32 –collet mount 1–10 mm, ER16 n1 x clockwise and 1 x counterclockwise nMaintenance-free

36 Optional Aggregates # 7983 Datenblatt

37 Optional Aggregates # 7983 nWith HSK 63 F nTransmission ratio: 1:1.48 n12,000 rpm nTool fixing using - 4 x countersunk bolts nTool diameter - D = approx. 70 mm nIdeal for sharp-edged coping of corner cutouts (90°)

38 Optional Aggregates # 7984 nCompact (short-length) design nWith HSK 63 F nDrilling / cutting / sawing nTransmission ratio: 1:1 n12,000 rpm nPivot range 0° - 100° nRotateable from 0° - 360°

39 Optional Aggregates # 7984 nWith collet chuck –1–16mm, ER25 nWith saw collet mount –D = max. 180 mm, d = 30 mm nMaintenance-free

40 Optional Aggregates # 7986 Datenblatt

41 Optional Aggregates # 7986 nHSK-F 63 collet nFor horizontal drilling on matrix table nDistance between drill axis and lower edge of housing: 7.8 mm nTransmission ratio: 1:4 n12,000 rpm nRotateable from 0° - 360° n3 cylindrical drill collet with clamping screw – 32 mm grid (only in conjunction with C-axis with pneumatic system)

42 Optional Aggregates # 7987 Datenblatt

43 Optional Aggregates # 7987 nHSK-F 63 nDrilling / sawing / routing 45° (fixed) nTransmission ratio: 1:1 n rpm n1 spindle with collet chuck 1–16 mm, ER25 nRotation clockwise nWith saw blade mount –D = max. 180 mm, d=30 mm nOil bath lubrication

44 Optional Aggregates # 7988 Datenblatt

45 Optional Aggregates # 7988 nHSK-F 63 nTransmission ratio: 1:1 n rpm nPivot range 0° - 100° n1 spindle with collet chuck –D = max. 180 mm, d=30 mm nRotateable from 0° - 360° with C axis

46 Optional Aggregates NC-drill chuck Datenblatt

47 Changing Units (Option) NC-drill chuck nHSK-F 63 n24,000 rpm nClamping range 3-16 mm infinitely adjustable ideal for intermediate sizes nCollet chuck is eliminated

48 Optional Aggregates Scoring Saw Unit

49 n12- / 14- / 16-fold pick-up tool changer necessary nHSK 63 F nScoring depth set manually using swivel arm nSkew setting (scoring saw / main saw) via setscrew and digital counter nSpecially matched tooling system (scoring saw / main saw ground as a set)

50 Optional Aggregates Scoring Saw Unit nAngle gear –Main saw Ø 250 mm, n(max.) rpm –Scoring saw Ø 100 mm, n(max.) rpm –(only in combination with C-axis with pneumatic drive) nadvantages: –excellent cutting results –Particularly suited for veneered panels coated with laminate


Download ppt "CNC- Machining Centers Optional Aggregates. Aggregates nHigh torque through optimized gears nLittle wear due to precise high quality bearings and special."

Similar presentations


Ads by Google