1. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: Application of Finite Deformation Theory to the Development of an Orthogonal Cutting Model—Part II: Experimental Investigation and Model Validation
J. Manuf. Sci. Eng. 2005;128(3): doi: /
Figure Legend:
Split Hopkinson pressure bar setup

2. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: Application of Finite Deformation Theory to the Development of an Orthogonal Cutting Model—Part II: Experimental Investigation and Model Validation
J. Manuf. Sci. Eng. 2005;128(3): doi: /
Figure Legend:
Experimental and fitted constitutive equation behaviors for O1 and L6 tool steels

3. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: Application of Finite Deformation Theory to the Development of an Orthogonal Cutting Model—Part II: Experimental Investigation and Model Validation
J. Manuf. Sci. Eng. 2005;128(3): doi: /
Figure Legend:
The extrapolated constitutive relationships for O1 and L6 steels

4. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: Application of Finite Deformation Theory to the Development of an Orthogonal Cutting Model—Part II: Experimental Investigation and Model Validation
J. Manuf. Sci. Eng. 2005;128(3): doi: /
Figure Legend:
The orthogonal cutting experimental setup

5. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: Application of Finite Deformation Theory to the Development of an Orthogonal Cutting Model—Part II: Experimental Investigation and Model Validation
J. Manuf. Sci. Eng. 2005;128(3): doi: /
Figure Legend:
Cutting force comparison for O1 tool steel

6. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: Application of Finite Deformation Theory to the Development of an Orthogonal Cutting Model—Part II: Experimental Investigation and Model Validation
J. Manuf. Sci. Eng. 2005;128(3): doi: /
Figure Legend:
Cutting force comparison for L6 tool steel

7. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: Application of Finite Deformation Theory to the Development of an Orthogonal Cutting Model—Part II: Experimental Investigation and Model Validation
J. Manuf. Sci. Eng. 2005;128(3): doi: /
Figure Legend:
Thrust force comparison for O1 tool steel

8. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: Application of Finite Deformation Theory to the Development of an Orthogonal Cutting Model—Part II: Experimental Investigation and Model Validation
J. Manuf. Sci. Eng. 2005;128(3): doi: /
Figure Legend:
Thrust force comparison for L6 tool steel

9. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: Application of Finite Deformation Theory to the Development of an Orthogonal Cutting Model—Part II: Experimental Investigation and Model Validation
J. Manuf. Sci. Eng. 2005;128(3): doi: /
Figure Legend:
Shear angle comparisons for O1 tool steel

10. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: Application of Finite Deformation Theory to the Development of an Orthogonal Cutting Model—Part II: Experimental Investigation and Model Validation
J. Manuf. Sci. Eng. 2005;128(3): doi: /
Figure Legend:
Shear angle comparisons for L6 tool steel

11. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: Application of Finite Deformation Theory to the Development of an Orthogonal Cutting Model—Part II: Experimental Investigation and Model Validation
J. Manuf. Sci. Eng. 2005;128(3): doi: /
Figure Legend:
Temperature along a flowline at different cutting velocities