1. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: A Prototype of an Implantable Thermoelectric Generator for Permanent Power Supply to Body Inside a Medical Device
J. Med. Devices. 2013;8(1): doi: /
Figure Legend:
(a) The schematic circuit diagram of the boosted circuit, (b) fabrication drawing of the boosted circuit, and (c) physical image of the boosted circuit

2. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: A Prototype of an Implantable Thermoelectric Generator for Permanent Power Supply to Body Inside a Medical Device
J. Med. Devices. 2013;8(1): doi: /
Figure Legend:
Sketch of two implanted TEG modules

3. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: A Prototype of an Implantable Thermoelectric Generator for Permanent Power Supply to Body Inside a Medical Device
J. Med. Devices. 2013;8(1): doi: /
Figure Legend:
Sketch of the setup of TEG in in vivo experiment

4. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: A Prototype of an Implantable Thermoelectric Generator for Permanent Power Supply to Body Inside a Medical Device
J. Med. Devices. 2013;8(1): doi: /
Figure Legend:
(a) Temperature of TEG junctions and rabbit rectum, and (b) temperature difference across the TEG and the output voltage of the TEG module and boosted circuit

5. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: A Prototype of an Implantable Thermoelectric Generator for Permanent Power Supply to Body Inside a Medical Device
J. Med. Devices. 2013;8(1): doi: /
Figure Legend:
(a) Clock circuit signal output driven by the single TEG module and boosted circuit, and (b) clock circuit signal output in a single pulse

6. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: A Prototype of an Implantable Thermoelectric Generator for Permanent Power Supply to Body Inside a Medical Device
J. Med. Devices. 2013;8(1): doi: /
Figure Legend:
(a) Temperature of TEG junctions and rabbit rectum, and (b) temperature difference across the TEG and the output voltage of the TEG module and boosted circuit

7. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: A Prototype of an Implantable Thermoelectric Generator for Permanent Power Supply to Body Inside a Medical Device
J. Med. Devices. 2013;8(1): doi: /
Figure Legend:
(a) Clock circuit signal output driven by the multistage TEG module and boosted circuit, and (b) clock circuit signal output in a single pulse

8. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: A Prototype of an Implantable Thermoelectric Generator for Permanent Power Supply to Body Inside a Medical Device
J. Med. Devices. 2013;8(1): doi: /
Figure Legend:
Simplified two-layer living body implanted with the TEG which includes the thermopiles and ceramic insulation films along the dimension x

9. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: A Prototype of an Implantable Thermoelectric Generator for Permanent Power Supply to Body Inside a Medical Device
J. Med. Devices. 2013;8(1): doi: /
Figure Legend:
(a) Steady-state temperature distribution along the dimension x in the calculation domain, and (b) the temperature difference crossing the single TEG and the calculated output voltage and maximum power of the TEG

10. Date of download: 10/8/2017
Copyright © ASME. All rights reserved.
From: A Prototype of an Implantable Thermoelectric Generator for Permanent Power Supply to Body Inside a Medical Device
J. Med. Devices. 2013;8(1): doi: /
Figure Legend:
(a) The temperature difference crossing the TEG, and (b) the calculated output voltage and maximum power of the TEG