1. Model: DS-600 5x 10/100/1000Mbps Ethernet Port Centralized WLAN management and Access Point Discovery Manages up to 50 APs with access setting control Deploy the IP address of AP, and complete Wireless Configuration Wireless Network Monitoring, managed AP status and wireless client Support Multiple-SSID and SSID/VLAN banding Without changing the existing network infrastructure, easy deployment Access Point information Edition Central AP Control Management Software Support Support Wifi Dog for local authentication and website redirection Smart roaming Client load balancing 1 GIGABIT WIRELESS LAN CONTROLLER

2. DS-600 is designed specifically for the control, monitoring and management of Wicell AP. It provide real-time information and status update on the WiFi Mesh condition, operating scenario, resource alarm, and also client status monitoring and control. Besides managing the Hybrid WiFi Mesh solution, DS-600 is also capable of managing our Enterprise AP, Long haul Bridges, within the single environment. Compliance with full SNMP V1, 2c and 3, standard protocol, makes our NMS is able to interrogate other devices which also compliance with the same or similar protocol. Fully secure backend connection via VPN tunnel to ensure the management link is securely controlled under the HQ control center. However, the thin NMS (standard) version is also cable of monitoring the Network condition via local association to any of the networking interface, wired or wirelessly. Key Features Supporting Features Deployment / Topology View Client view Node details Display the general information regarding the selected Mesh AP MIB browser SNMP feature on read, write configuration on specific AP AP Configurator for System Syslog Network Services Management Remote command ProductWicell controller – desktop type ModelDS-600 Hardware Processor Atheros CPU Bus680MHz ChipsetAtheros Memory256 MB I/O Channel5 x 1000 Mbps Ethernet port Power supply12V/1A DC Specification DS-600 2

3. General Features Deployment / Topology View Import background images Save the sett Blocklist A feature to block unwanted AP unit from displaying in the topology map Event log Display the log message of the topology map status Client view Node details Display the general information regarding the selected Mesh AP MIB browser The SNMP feature enables the NMS user to perform SNMP action (get, set, and table) to read and write the configuration of a specific Mesh AP. Besides, user may load other standard MIB files to perform those operations as well AP Configurator System Syslog Advance tuning Network WAN, VLAN Mesh topology, Wireless Configure Route Table IP Sec, L2TP Client OLSR Services NTP, DHCP Server Firewall, MAC filter NAT table, Traffic shaping Mobile Specification 3

4. IP - Captive portal - RADIUS client - DDNS, Zero configuration - Auto IP - Routing watch dog - System watch dog Management - HTTP server - SNMP get and set operations - SNMP trap operation Remote command - Image upload / download - Upload and download configuration and image files via TFTP server - System reboot - Reboot the Mesh AP remotely - System reset - Reset the Mesh AP to factory settings. DS-600AR7161 1G all port test ModeConfiguration 1518 byte512 byte64 byte kppsMbpskppsMbpskppsMbps Bridging None58704.4171.9704.1187.395.9 Bridging 25 bridge filter rules 58.5710.484.5346.186.444.2 Routing none59.7725136.1557.514775.3 Routing 25 simple queues 55.2670.3117.7482.113770.1 Routing 25 ip filter rules 54.7664.359.4243.359.230.3 Specification Performance test results www.wicellnetwork.com 4