Presentation is loading. Please wait.

Presentation is loading. Please wait.

J-W Schmelling Nikhef Amsterdam Electronics- Technology 29-31 of January 2013.1PPM-DU optics for KM3NeT Collaboration meeting Marseille PPM-DU: A three.

Similar presentations


Presentation on theme: "J-W Schmelling Nikhef Amsterdam Electronics- Technology 29-31 of January 2013.1PPM-DU optics for KM3NeT Collaboration meeting Marseille PPM-DU: A three."— Presentation transcript:

1 J-W Schmelling Nikhef Amsterdam Electronics- Technology 29-31 of January 2013.1PPM-DU optics for KM3NeT Collaboration meeting Marseille PPM-DU: A three DOM Detection Unit in place of an Antares line by Jan-Willem Schmelling on behalf of the optical team.

2 J-W Schmelling Nikhef Amsterdam Electronics- Technology Contents. Optical network for PPM-DU Optical network for PPM-DOM vs PPM-DU vs phase 1 Current status Planning Conclusions Questions? 29-31 of January 2013.2PPM-DU optics for KM3NeT Collaboration meeting Marseille

3 J-W Schmelling Nikhef Amsterdam Electronics- Technology PPM-DOM > PPM-DU upgrade. Problem: PPM-DOM architecture was not build to accommodate 3 DOMS. Not possible to upgrade because of Saklay absence. Solution: Triple all the parts needed for dedicated DOM communication. In downstream and upstream direction. Result: Three PPM-DOM electrical shore stations, A dedicated optical shore station providing three channels. A optical network with very few similarities with the phase-1 network. 29-31 of January 2013.3PPM-DU optics for KM3NeT Collaboration meeting Marseille

4 J-W Schmelling Nikhef Amsterdam Electronics- Technology PPM-DU optics for KM3NeT Collaboration meeting Marseille429-31 of January 2013. Progress on BROADCAST for PPM-DU until December 2012 ( image from P. Jansweijer, NIKHEF ) IRFU Saclay : Yassir MOUDDEN, Frédéric CHATEAU, Frédéric LOUIS, Eric ZONCA, Hervé LE PROVOST, Bertrand VALLAGE, Shebli ANVAR University of Athens : Konstantinos MANOLOPOULOS

5 J-W Schmelling Nikhef Amsterdam Electronics- Technology Three DOM Slow Control distribution. DOM Slow control distribution features: A point to point optical path to each DOM instead of one common path. Two fibers to each DOM. Each DOM is receiving two wavelengths: 1 for SC and 1 for DATA. Three modulators for Slow Control to each DOM individually. An extra attenuation is needed to protect the DOM PIN-diode. 29-31 of January 2013.5PPM-DU optics for KM3NeT Collaboration meeting Marseille

6 J-W Schmelling Nikhef Amsterdam Electronics- Technology Three DOM Slow Control distribution. 29-31 of January 2013.6PPM-DU optics for KM3NeT Collaboration meeting Marseille

7 J-W Schmelling Nikhef Amsterdam Electronics- Technology Three DOM data upstream. DOM upstream path features: A point to point optical path from each DOM to shore, similar to phase 1 Each DOM is receiving two wavelengths: 1 for SC and 1 for DATA. In the DU container the functionality for the optical timing remains. 29-31 of January 2013.7PPM-DU optics for KM3NeT Collaboration meeting Marseille

8 J-W Schmelling Nikhef Amsterdam Electronics- Technology Three DOM data upstream. 29-31 of January 2013.8PPM-DU optics for KM3NeT Collaboration meeting Marseille

9 J-W Schmelling Nikhef Amsterdam Electronics- Technology Infrastructure Slow Control. 29-31 of January 2013.9PPM-DU optics for KM3NeT Collaboration meeting Marseille Infrastructure Slow Control features: Dedicated control channel for infrastructure control Tx and Rx. Independent of the items it does control (no EDFA deadlock). Full control of EDFA’s. Full monitoring features of AC/DC converter possible. Variable Optical Attenuator (VOA) control for timing activation or calibration. Based on off-the-shelf components. As much as possible Ethernet based (no manpower for building dedicated electronics). Components are NOT suitable for phase-1, i.e. lifetime <<15 years, power consumption and reliability.

10 J-W Schmelling Nikhef Amsterdam Electronics- Technology Infrastructure Slow Control. 29-31 of January 2013.10PPM-DU optics for KM3NeT Collaboration meeting Marseille AC/DC

11 J-W Schmelling Nikhef Amsterdam Electronics- Technology Infrastructure Slow Control. All parts off-the-shelf Ethernet based Interface to match device under control Ethernet <> Fiber (sfp)Fiber(sfp) <>Ethernet Gbe switch (4port) Ethernet to 1 x RS-232 1x spare TTL serial Ethernet to 1 x RS-232 1x spare TTL serial Ethernet to 1 x RS-232 1x spare TTL serial Ethernet to 1 x Modbus rs485/rs232 ? EDFA A2 True RS232 ? Digital Con- trollable VOA (True RS232 EDFA A1 True RS232 ? RJ45 2x Optical RJ45 IDC DB9* ??? Mating cable A1 A2 Optional + + AC/DC Conv 29-31 of January 2013.11PPM-DU optics for KM3NeT Collaboration meeting Marseille

12 J-W Schmelling Nikhef Amsterdam Electronics- Technology Optical time calibration. Optical time calibration The initial optical time calibration concept for PPM-DOM worked in lab, no in-situ. Currently less priority to develop a new/modified approach because we lack manpower and time in the planning. The distance between the three DOMs is known > less need for optical time calibration because the roundtrip timing does work. Sub sea parts still provides timing calibration feature based on the PPM-DOM concept Optical power level tuning > digital VOA Tuning necessary to balance the wavelengths for the EDFA. The fixed attenuation as in de PPM-DOM did not work, adjustment is needed. No timing pulse modulator for shore station. (can be swapped/borrowed from PPM-DOM?) 29-31 of January 2013.12PPM-DU optics for KM3NeT Collaboration meeting Marseille

13 J-W Schmelling Nikhef Amsterdam Electronics- Technology Optical time calibration. λ1λ1 λ2λ2 λ 2 λ4λ4λ6λ6 50/50? A1 REAM 2xCu PIN λ2λ2 C2 A2 High attn = OFF Low attn = ON (callibrated) 20/80 REAM 2xCu PIN λ6λ6 REAM 2xCu PIN λ4λ4 90/10? Infra SC C2 Infra SC 50/50? D1 Xx dB Junction Box λ3λ3 λ8λ8 λ8λ8 λ1λ1 ?? λ1λ1 λ3λ3 λ5λ5 λ9λ9 λ10 λ9λ9 λ2λ2 λ4λ4 λ6λ6 D2 VOA manual 6 λ laser- bank 3x λ 4 λ 6 λ 1 λ 3 λ 5 VOA RS-232 DU-container Shore station ? λ 2 λ 4 λ 6 LiNbO3 λ 1 λ 3 λ 5 29-31 of January 2013.13PPM-DU optics for KM3NeT Collaboration meeting Marseille

14 J-W Schmelling Nikhef Amsterdam Electronics- Technology DU-container. λ1λ1 50/50? A1 C2 A2 High attn = OFF Low attn = ON (callibrated) 20/80 90/10? Infra SC D1 Xx dB Junction Box λ3λ3 λ8λ8 λ9λ9 λ10 VOA RS-232 DU-container No OFM (Optical Fanout Module) available in VEOC. VEOC connected to DU-container using a penetrator. All the hardware in container at the bottom of the DU. Based on Antares design where possible Cooling of EDFA’s and infrastructure SC should be taken care of. 29-31 of January 2013.14PPM-DU optics for KM3NeT Collaboration meeting Marseille

15 J-W Schmelling Nikhef Amsterdam Electronics- Technology PPM-DOM vs PPM-DU vs Phase-1 29-31 of January 2013.15PPM-DU optics for KM3NeT Collaboration meeting Marseille PPM-DOMPPM-DUPhase-1 Nr of DOMs13Lot’s SC/broadcast featureno yes Nr of ch per EDFA/fiber2640/80? Input Fibers per DOM221 Bi-directional partno yes Optical timingnomaybeneeded Red is not tested/verified!

16 J-W Schmelling Nikhef Amsterdam Electronics- Technology PPM-DU Component availability. 29-31 of January 2013.16PPM-DU optics for KM3NeT Collaboration meeting Marseille LocationAvailable? All passive opticsShore+seaYes Digital Variable Optical Attenuator (VOA)seayes Optical switches shore stationshoreYes Infrastructure Slow Control parts(electrical)seaYes Long distance SFP modules for infra. Slow controlShore+seaExp wk 5 2013 6 channel laser sourceShoreExp wk 6 2013 3 channel optical receiver stageShoreExp wk 10 2013 1 channel Optical modulator stageShoreExp wk 13 2013 3 channel optical modulator stageshoreLead time 12 wks Optical amplifiers (EDFA)seaExp wk 7 2013 DOM optics (PIN-diode + REAM)seaYes

17 J-W Schmelling Nikhef Amsterdam Electronics- Technology PPM-DU Component availability. 29-31 of January 2013.17PPM-DU optics for KM3NeT Collaboration meeting Marseille

18 J-W Schmelling Nikhef Amsterdam Electronics- Technology Planning for PPM-DU optics. 29-31 of January 2013.18PPM-DU optics for KM3NeT Collaboration meeting Marseille Basic DOM readout via optical interface (not PPM-DU optical network).DONE Start building the full optical test bench for PPM-DUEarly Feb Evaluate the modulator option for 3 ch (test 1 modulator)*Early Feb Test the infrastructure slow control setupDONE Implement the infrastructure slow control in full PPM-DU network test bedEnd March PPM-DU optical test bed ready for three DOM tests*End April *The 1 channel modulator needs to be tested before the upgrade to a 3 ch optical modulator stage can be started. This date strongly depends on the test outcome and the lead time of the modulators.

19 J-W Schmelling Nikhef Amsterdam Electronics- Technology Conclusions. 29-31 of January 2013.19PPM-DU optics for KM3NeT Collaboration meeting Marseille PPM-DU optical network is defined and accepted. A solution for the SC/broadcast distribution has been found > results in a delay in the planning. Power supply for three DOMS based on Antares power system A infrastructure slow control system with more features will be implemented Infrastructure slow control based on Ethernet off-the-shelf components with limited lifetime <<15 years. PPM network has few similarities with KM3NeT phase-1. As a result of manpower and planning the optical time calibration is put on low priority. Lead times of optical components are long (10-12 weeks)

20 J-W Schmelling Nikhef Amsterdam Electronics- Technology PPM-DU optics for KM3NeT Collaboration meeting Marseille29-31 of January 2013 Questions? The END. 20


Download ppt "J-W Schmelling Nikhef Amsterdam Electronics- Technology 29-31 of January 2013.1PPM-DU optics for KM3NeT Collaboration meeting Marseille PPM-DU: A three."

Similar presentations


Ads by Google