1. LonWorks Introduction 2004. 10. 15 Hwayoung Chae

2. Contents  Introduction  Neuron Chip  LonTalk Protocol  Addressing  SNVT  LonTalk Communication Method  Neuron C  Application Installation Step  LonMark Object

3. Introduction  LON – Local Operating Network by ECHELON  Open Control System  BA, FA, HA  Configuration  LonWorks Device - Neuron Chip & Transceiver  LonTalk protocol  LNS(LonWorks Network Services)  User Application

4. Neuron Chip

5.  Characteristic  Three 8-bit processor  On-chip memory  Two 16-bit timer/counter  11 Programmable I/O port  Network communication port

6. LonTalk Protocol  Variable transmission media – TP, RF, PL, Optical Fiber, IR  Priority based transmission  Suitable Message – NV, Explicit Message  Hierarchical addressing – 2 48 domain, 32000 node  Authentication service  Interoperability – LonMark (SNVT)

7. LonTalk Protocol  OSI 7 Layer  Physical Layer – TP, PL, RF  MAC Sublayer – CSMA  Link Layer – connectionless, frame encoding, error detection  Network Layer – packet transmission, routing  Transport & Session Layer – process order, message processing, authentication  Presentation & Application - Node Service

8. Addressing  Addressing Method – 3, 4 layer  (domain, subnet, node)  (domain, subnet, neuron id)  (domain, group, member)  Domain – 0,1,3,6 byte  Subnet, group – 8 bit  Node – 7 bit  Member – 6 bit

9. SNVT  Application parameters  LonMark NV Type for Interoperability Network input/output [class] type identifier [=initial value] Network input byte nviInputData

10. LonTalk Communication Method

11.  Explicit Message  transmit addressing information & data directly  228 bytes  Network Variable : Using SNVT  Message Service  ACKD, Request/Response service  Repeated service, Unacknowledged

12. TASK

13. Neuron C  Network Variable  Input/Output Object, Binding network input byte nviInputData network output bit nvoOutData  Event-driven way – priority based When(Event_1) { // Event_1 content }  Software Time – ms timer, sec timer

14. Application Installation Step  Addressing  Assign each node to the address  Binding  Connect between nodes logically  Configuration  Configure the communication environment between nodes

15. Application Installation  Installation tool  Configure the network with the network manager which send the network message to neuron chip  Neuron Chip Base  PC Base  LonManager LonMaker for MS-DOS  LonWork Network Service(LNS) for Windows

16. LonMark Object  Basis of interoperability  Describe standard formats  how information is input to and output from a node  how information is shared with another nodes on the network  Define set of one or more network variable input and output(SNVT)

17. Neuron-based Device

18. Host-based Device

19. LonWorks Host Application 2004. 10. 15 Hwayoung Chae

20. Contents  Overview  Host application architecture  Application buffer  Network Interface Configuration Options  Sending Messages  Receiving Messages  Binding to a Host Node  Network Driver  Sample host application

21. Overview of the host application architecture  Host application are application programs running on hosts other than NEURON CHIPs that use the LONTALK protocol to communicate with nodes on a LONWORKS network  Host applications can be used for any type of application, but the most typical uses are network management, network control, and network monitoring.

22. Host application architecture

23. Overview of the host application architecture  Network driver  The software that interface the host application to the host interface hardware.  Host interface  The hardware interface between the host processor and the network interface.  Network interface  A device that provides an interface between a host and a LONWORKS network.

24. Host Application Architecture  Application Layer  Send and receive LONTALK messages  Link Layer  Ensure reliable delivery of packets between the host and the network interface  Control the network interface  Physical Layer  Physical interface between the host interface and the network interface

25. Application buffer  Network Interface Command  Application buffer type and size  Message Header  LONTALK messages type  Network Address  Destination address for downlink and source address for uplink  Data  Transferring data

26. Network Interface Configuration Options  Network variable processing option  When network interface selection  the host can declare up to 62 network variables  When host selection  the host can declare up to 4096 network variables  When a network variable update occurs. 1. Target address decoding. 2. Network variable selection. 3. Network variable modification.

27. Network Interface Configuration Options  Network variable configuration table size option  When network interface selection is specified, this option defines the size of the network variable configuration table on the network interface.  Explicit addressing option  Specifying “explicit addressing on” adds an 11byte explicit address field to every application buffer.

28. Sending Messages 1. Building the message within the application buffer data structures 2. Write the application buffer to the network driver 3. Repeat step 2 if the driver returns the LDV_NO_BUFF_AVAIL or LDV_DEVICE_BUSY error codes 4. If necessary, process an response message from the network interface 5. Process the completion event message from the network interface

29. Receiving Messages  Application Messages  Network variable updates  Poll request  Response to a poll  Explicit messages  Network management or Network diagnostic messages is processed by the Neuron Chip within the network interface with following exceptions  Set Node Mode, Wink  Update Net Variable Config  Query Net Variable Config, etc.

30. Differences between host selection and network interface selection

31. Binding to a Host Node  SNVT Import  Import the network variable descriptions over the network  Using SNVT network management command  External Interface File Import  Copy or create an external interface file  Add the network variable and message tag entries.  Import this new external interface file to the network management tool

32. Network Driver  Provides a device-independent interface between the host application and the network interface  Standard Network Driver  ldv_open(char *device_name)  ldv_read(LNI handle, void *msg_p, unsigned length)  ldv_write(LNI handle, void *msg_p, unsigned length)  ldv_close(LNI handle)  Driver Direct Functions  ldv_write_direct(), ldv_read_direct(), ldv_register()

33. Sample host application

34. Further Work  Host application code  EasyLon linux device driver code  Simple demonstration with above two  etc…