Presentation is loading. Please wait.

Presentation is loading. Please wait.

Rita Ramos IBA RCM, 21-23 Nov 2005 MEASUREMENT OF PROTON ELASTIC SCATTERING CROSS SECTIONS FOR LIGHT ELEMENTS – VALIDATION OF A “BULK SAMPLE”

Similar presentations


Presentation on theme: "Rita Ramos IBA RCM, 21-23 Nov 2005 MEASUREMENT OF PROTON ELASTIC SCATTERING CROSS SECTIONS FOR LIGHT ELEMENTS – VALIDATION OF A “BULK SAMPLE”"— Presentation transcript:

1 Rita Ramos ariel@itn.pt IBA RCM, 21-23 Nov 2005 MEASUREMENT OF PROTON ELASTIC SCATTERING CROSS SECTIONS FOR LIGHT ELEMENTS – VALIDATION OF A “BULK SAMPLE” METHOD. A.R. Ramos, N.P. Barradas, E. Alves

2 Rita Ramos ariel@itn.pt IBA RCM, 21-23 Nov 2005 OUTLINE Objectives Equipment Proposed plan Samples Measurements: “thin film” and bulk samples

3 Rita Ramos ariel@itn.pt IBA RCM, 21-23 Nov 2005 Objectives Measurement of (p,p) elastic scattering cross sections for nitrogen and lithium in the 500-2500 keV energy range. (p,p) cross sections for N to be measured using the standard ”thin film” technique. Measurement will span the 500-2500 keV energy range and scattering angles between 160º, 150º and 130º, complementing existing data. (p,p) cross sections for Li to be measured using a thick film target or bulk sample. The method will first be validated using the measured cross-sections for nitrogen and the existing evaluated cross sections for oxygen and silicon.

4 Rita Ramos ariel@itn.pt IBA RCM, 21-23 Nov 2005 ITN - Equipment 2.5 MV Van de Graaff accelerator, equipped with microprobe 210 kV high fluence implanter

5 Rita Ramos ariel@itn.pt IBA RCM, 21-23 Nov 2005 Proposed Plan Tasks to be performed by order of execution: 1.Procurement of appropriate thin film and bulk samples for cross section measurements. 2.Detailed compositional analysis of the samples by PIXE and RBS. 3.Measurement of the (p,p) cross section for N using the “thin film technique”. 4.Development and validation of a “bulk sample” method for proton elastic scattering cross-section measurements using the measured N cross-sections and the evaluated O and Si cross sections. 5.Application of the “bulk sample” method to the measurement of the proton elastic cross section for lithium.

6 Rita Ramos ariel@itn.pt IBA RCM, 21-23 Nov 2005 Samples Thin films: Au/AlN/C Bulk samples: TiO 2, Si, Si(Sb), LiF + ?

7 Rita Ramos ariel@itn.pt IBA RCM, 21-23 Nov 2005 “Thin film” Measurements-N(p,p)N Figure 1:  =160º PRELIMINARY!

8 Rita Ramos ariel@itn.pt IBA RCM, 21-23 Nov 2005 “Thin film” Measurements-N(p,p)N Figure 2:  =130º PRELIMINARY!

9 Rita Ramos ariel@itn.pt IBA RCM, 21-23 Nov 2005 “Bulk” Measurements - Li(p,p)Li Measure bulk samples at different beam energies. Fit results with cross section as fit parameter. Validate method with N, Si and O. Then apply to Li.


Download ppt "Rita Ramos IBA RCM, 21-23 Nov 2005 MEASUREMENT OF PROTON ELASTIC SCATTERING CROSS SECTIONS FOR LIGHT ELEMENTS – VALIDATION OF A “BULK SAMPLE”"

Similar presentations


Ads by Google