1. Electronic Instrumentation Introduction * Group Taught Studio Course * Syllabus

2. Group Taught Studio Course w Classes 3 per week -- 2 hours each 20-30 minute lectures (in theory) “self-explanatory” experiments Raise your hand if you need help 2-3 staff members here at all times Most work is done in pairs Projects are done in team of 4 Parts of some experiments use data from your team

3. w Professors Dr. Shayla Sawyer (all lectures & studios) Dr. Russell Kraft (all studios) w TAs To be announced – watch web page

4. Syllabus – will be updated !! w Materials w Grade w Attendance Policy w Open Shop w Syllabus located at: http://hibp.ecse.rpi.edu/~connor/education/ElecInst.html http://hibp.ecse.rpi.edu/~connor/education/EISyllabus.html

5. Materials w Text: Essence of Electronics by Colin Lunn less than $25 at RPI bookstore old copies are good w Software: Capture/PSpice Student Version (download from Syllabus page) w Electronics Kit MUST BUY 1 per pair $50 per kit (buy from instructor) cash or check to ECSE Department w web resources http://hibp.ecse.rpi.edu/~connor/education/EILinks.html

6. Your Grade w 8 Experiments (25%) hand in one write-up per pair (two students) 2.5 to 3 classes each see “what to include in experiment write-ups” To be updated w 4 Quizzes (35%) (No final exam) w 8 Homework Assignments (10%) homework on WebCT (15 questions each) note warning about inactive connection w 4 Design Projects (25%) more detailed (work with 2 pairs to form team) one report per team of 4 apply what you learned in experiments w Participation/Performance (5%)

7. Attendance Policy w Attendance taken daily w You can make up missed classes during open shop (fill out form EImakeup.pdf) w Attendance counts as part of: participation grade (5% of final grade) each experiment (20/100) each project (20/100) w missed class = -10pts/missed class late = -5 w miss 3 classes = 0 for experiment/project w More information: EIAttendance.html

8. Participation Grade (5%) w Attendance and staff assessment w Questions on the four topics: circuits, equipment, theory, and computer tools w Group self assessment on WebCT w Don’t specialize w Don’t eat in the classroom w Use headphones for your own music w More information: EIAttendance.html

9. Open Shop w Located in JEC 4201 – Core Studio Shared with Circuits and Embedded Control w During any open shop make up missed classes work on experiments/projects not finished in class w Some hours will have EI TAs help with homework help with theory study for tests w Hours to be determined

10. Policies w Each pair of students uses one IOBoard Boards are each pair’s responsibility Boards are purchased for the semester and cost is reimbursed when returned at the end of the semester (student account is automatically charged). Boards may be used during class and during open shop Use your own board each time (unless there is a failure) Your name will be listed with a serial number of the board w Each pair of students also have a parts/tool kit These are purchased, so they may be removed from the room Label you kit with your names There is space in the cabinets to store the kits, if you desire w At the beginning of class Get your IOBoard Get your tool/parts kit w Put things away at the end of class

11. IOBoard w Download and install software http://mobilestudio.rpi.edu Click on DOWNLOADS Download Mobile Studio Desktop Install w After the software is installed Connect IOBoard to your computer using the USB cable If it’s the first time, let it search for new hardware drivers and install them Start Mobile Studio If it doesn’t work – unplug the USB cable and then plug it back in If it still doesn’t work: Read the FAQ on the IOBoard web page Ask for help If you have a T-40, we need to determine if your UBS2 is working w The HARDWARE link on the IOBoard web page shows the pinout of the board

12. Is everybody ready? w Pair up Two pairs will work together on projects, so introduce yourself to the rest of your team of 4. Sign the seating chart for the first couple of classes. If you have a T-40 Pick a partner who has a newer machine Or make sure that the Mobile Studio software will work on your machine. It will work if your UBS port is working at USB2 speed. w Each pair Purchase a tool/part kit $50 cash or check (made out to ECSE Dept.) (Swap the screw driver with one that has been ground to a smaller size) Pick an IOBoard Write you names on the label in the IOBoard cabinet Take the board to your seat Get the Mobile Studio software running Read the FAQ on the Mobile Studio web page Ask for help If you have a T-40, we need to determine if your UBS2 is working If time permits, Start Experiment 1, part A w Will interrupt once most teams are set.

13. The course is under new management and it is evolving to accommodate larger numbers w We are doing new things with new IOBoards We will have to make changes as we progress Some of the material on the web is for the old version so it may be wrong or it may have missing links Give us a few weeks and things will be better w In other words, parts of the course will be a little rough around the edges, but I plan on having fun. I hope you will enjoy it also.