1. Printed Circuit Technology for the Future „Leiterplattentechnik für die Zukunft“

2. Why chosing MOS? MOS Electronic GmbH
MOS Electronics has been experienced in the production of printed circuit boards for nearly three decades. The co-operation with our partners in the Far-East enables us to offer all types of printed circuit boards of any quantity. From prototype to high volume – this means you will get it from one source!
MOS Electronic GmbH
Often during development of prototypes engineering requirements will change that later will effect mass production. Our logo is: „always a step ahead“ that means your products will be produced today with technology of tomorrow.
>> Printed circuit technology for the future >>

3. Our Company MOS Electronic GmbH
We are a medium-sized company employing 60 people
We are specialized in quick turnaround service of small and medium sized production
We have customized technology to your specification
We have large volume production by partners in the Far-East
We are owner-managed

4. First production plant
History
1977 Established as electro-plating service
1984 Re-establishment as PCB-production
1993 Move into a new building
1994 Introduction of modern PPS-system
1995 Introduction CAM
1995 Establishment Joint Venture H&S CEE SA
1996 Start of multilayer-production
1999 Certification ISO 9002
1999 Expansion of production area
2000 Mechanical Microvias
2002 Lasermicrovias, SBU, HDI
2002 New Certification ISO 9001:2000
2003 Flex and flex-rigid-production
First production plant
MOS Electronic GmbH
Plant 1
Plant 2

5. History Die MOS Electronic GmbH
2003 Impedance-controlled circuit boards
2004 Development Multilayer-HDI process
2004 First double-sided sprayer for soldermask
2005 Complete ROHS-conform circuit board
2005 Expansion of flex and flex-rigid production
2005 Expansion of HF-production
2006 Foundation of Corporation with Chinese partners
2007 Expansion of HDI-production
2007 Introduction of Envision Process
2007 Expansion of quality management trading goods
2008 Introduction LDI
2009 Foundation 2-mil-technology (50µm line/space)
2010 Expansion of thick-copper and pressfit technology
Die MOS Electronic GmbH

6. Investments 2010/2011 MOS Electronic GmbH
Lauffer Multistage (Multilayerpress)
Innovation: Bonding machine DIS 77:
First exemplar on the European Market
Legend ink printer Orbotech Sprint 8
Ultra fine line etching machine with
etchant regeneration system (Schmid)
MEC-Etch system (Innerlayer pre-treatment)
X-ray drilling machine
Drilling / routing machine for metal core PCB
Drilling / routing machine with 4 spindles
MOS Electronic GmbH

7. Investmentplanning 2011/2012 MOS Electronic GmbH
Innerlayer liquid resist plating
Via hole plugging
CAM-system INCAM
3D-Videomicroscope for development
expenses
Integr8tor + CRM-Software ….
Mass production 2-mil-Technology
Expansion stacked-via-Technology
New building for production of HDI Technology 4000 m²
ISO TS introduction in 2012
ISO 1348 introduction
MOS Electronic GmbH

8. Company Philosophy Our products
The quality standard of our products is a firm part of our company philosophy. Since the foundation of our company it has always been our intention to keep our production to a technological first class standard. Permanent re-investigations and product improvements have always been significant elements of our succes.

9. Express-Service
„Express-service begins with quotation!“ We know your engineers always wanted it yesterday
Production of prototypes from one day turnaround
HDI and Flex rigid delivery time on demand
Production in series quality
Identical processes and machines
Identical data-processing and filing
Transferable to series
No board-design limitations
Our big strength: emergency production also for substantial series
Flexibility is a matter of course for us – For very urgent orders we also produce on week-ends
Our products

10. Technology Our products
From Single-sided up to 28 layers (thickness 6.0 mm max.)
HDI- and SBU-Multilayer (4 + core + 4 max.)
Blind-, buried- and microvias
Stacked vias
HF / Impedance-control (POLAR)
Halogen-free circuit boards
Copper up to 400 µm
Pressfit technology
Aluminium based PCB
Flex / flex-rigid (also HDI)
Different-coloured soldermasks
Via Hole Plugging and Copper Hole Filling
RoHS / UL
Production according to customer‘s requirements
Our products

11. Service and Advice Impedance calculations and design suggestions
Technological advice, also for the selection of the appropriate materials.
Support of the development of new products
Development of alternative solutions and further development to product stability
Selection of the optimal producer
Design for Manufacturing (DFM)
Our products

12. Sizes Technology Standard panel size for single-sided and doublesided:
580 mm x 427 mm (usable area)
Standard panel size for multilayer:
570 mm x 417 mm (usable area)
Standard panel size for SBU-multilayer:
540 mm x 370 mm (usable area)
Special sizes on demand
Technology

13. Materials Standard for single- and doublesided:
Nan Ya FR-4-86 UV Block (TG 140, improved for leadfree process)
Standard for multilayer:
Isola IS400 (TG 150, filled)
Nan Ya NP155F (TG 150, filled)
TG 170 materials
HF materials (e.g. Rogers)
Halogen-free materials
Polyimide
Teflon
Aluminium-based Materials
Special materials according to customer‘s request
Technology

14. Surfaces Technology Final surfaces HAL Imm. Ni/Au Bondgold OSP
Nickel plating
Reductive Au
HAL - leadfree
Imm. Sn
Ni/Au plating
Imm. Ag
Ag plating
Soldering varnish
Technology
Screen-printings
Service printings
Carbon
Flux-Stop-varnish
Heatsink-varnish
Peelable mask
Via-filler
Silver conductive
mask

15. HDI Technology
Technology

16. Quality
Quality

17. References
References

18. Quality and Control
Strongly increased requirements as well as the ever higher complexity already made constant examinations of the products necessary during the manufacturing. In the following we would like to present to you some of the examinations accomplished in our company:
Quality and Control

19. Manual-optical control
During production regular optical tests are made by our well-skilled staff...
Quality and Control

20. Automatic-Optical Inspection (AOI)
The corroded conductive pattern is submitted additionally to manual controls of machine-supported by Automatic-Optical Control (AOI).
Quality and Control
The etched conductive pattern will be compared with the CAM layout data.

21. Micro-sections Quality and Control
The galvanic copper construction requires inspection of the coating thickness and the quality of the deposited copper.
In addition by each order micro-sections are provided and documented.
Quality and Control

22. Dimensions Quality and Control
After the mechanical treatment, accuracy to size is examined…

23. Surface and coating thickness
Vision Stereomicroscope:
Examination of the surface finish.
Fischer MMS-PC coating thickness measuring:
Hole copper and copper on the surface.
Material thickness inside.
Thickness of soldermask.
Quality and Control
Fischerscope X-Ray fluorescence measuring instrument:
Examination of the coating thickness of the final surface (imm. Sn, imm. Ni/Au, imm. Ag…).
Couloscope CMS tin coating measuring instrument:
Measurement of the tin coating available for the soldering process.

24. The electrical test Quality and Control
The last and most important examination is the electrical test. Here it is guaranteed that no short-circuits or breaks are present.
Quality and Control

25. The MOS Corporation
The MOS Corporation

26. The MOS Corporation
Successful cooperation with Asian series manufacturers since 2005
All PCB types in all batch sizes available
The MOS Corporation

27. Organisation MOS takes over the entire completion:
Selection of production
Technical clarifying
Transport and logistic
MOS is locally in China
Quality responsibility is with
MOS
Partner in Germany is MOS
Completely final inspection with MOS
Possibility of emergency production with MOS
Remachining possibility with MOS
The MOS Corporation

28. Quality assurance
Our series manufacturers are ISO 9001, TS16949 and ISO certified
Professional selection of the partners:
We have a „second source“ for each technology and batch size
The MOS Corporation

29. Goods inwards quality-check
Before distribution to our customers, all supplies of our corporation partners have an extensive incoming goods check:
Verification and validation of the products and the necessary documents in relation to the customer defaults.
Sampling inspection:
Examination of the quality of the plated-through holes.
Examination of the mechanical dimensions.
Measurement of coating thickness (stackup, copper, Ni/AU, Ag, Sn…).
Archiving of all documents including resetting samples and inspection documentation.
Special measurement after customer's request
The MOS Corporation

30. Environment Environment
Environmental protection and preservation of resources is a subject that is always in the forefront of our policies. Our company, being at the edge of a protected area in the nature park of Black Forest, constantly pays attention for the saving of materials, water and energy. With the selection of new manufacturing plants, these factors play a substantial role, too. Recycling of materials is an important point in our policies. The selection of the partners within our group was likewise an important factor. They are also certified according to ISO Meaning our environmental philosophy is reflected in our principle:
» Printed circuit technology for the future. «
Environment

31. Contact Management board: Sales department: General Manager
Mr. Horst Schmalstieg
Phone: – 60
General Manager
Mrs. Margrit Schmalstieg
Phone: – 19
Contact
General Manager
Mr. Reinhard Rosen
Phone: – 20
Deputy Managing Director
Herr Jürgen Bauer
Phone: – 10
Sales Management
Mr. Jens Rosen
Phone: – 33
Support / logistic trading goods
Phone: – 34
Head Office
MOS Electronic GmbH
Phone: – 0
Fax:

32. Contact Technological consultation / supervision of production:
Work preparartion department:
Quality assurance / Accounting / Purchasing:
Production / Technology
Mr. Michael Klingler
Phone: – 66
Production / Technology
Mr. Matthias Klingler
Phone: – 55
Contact
Work preparation department
Mrs. Gabi Walz
Phone: – 35
CAM / Data
Mr. Klaus Holdermann
Phone: – 38
Quality assurance
Mrs. Sibylle Klingler
Phone: – 13
Accounting / Purchasing
Mrs. Elke Lörcher
Phone: – 12

33. Location MOS Electronic GmbH Hermann-Löns-Straße 40-44
D Neuweiler
Phone: +49 – 7055 –
Fax: +49 –
Mail:
URL:
Location

34. >> Demand us >>
Permanent advancement and constant investments into new technologies have secured us a leading position in the printed circuit board industry in Germany. Our high measure of authority and experience of many years as printed circuit board manufacturers have made us a very effective and successful co-operation possible with our partners for middle and large series in the Far East. For our usually medium-sized customers as a result of it singular resources in things printed circuit board arise.
MOS Electronic GmbH
>> Demand us >>

35. Many thanks for your interest.
MOS Electronic GmbH
Many thanks for your interest.