Download presentation
Presentation is loading. Please wait.
1
Unit 3 Chemical Reactions
2
Menu The Chemical Industry Hess’s Law Equilibrium Acids and Bases
Redox Reactions Nuclear Chemistry
3
The Chemical Industry
4
Major contributor to quality of life and economy.
The Chemical Industry Major contributor to quality of life and economy.
5
The Chemical Industry Quality of life Fuels (eg petrol for cars)
Plastics (Polythene etc) Agrochemicals (Fertilisers, pesticides etc) Alloys (Inc. Steel for building) Chemicals (eg Cl2 for water purification) Dyes (for clothing etc) Cosmetics and medicines Soaps and detergents Etc!!!!
6
The Chemical Industry Contributes to National Economy
Major employer of people at all skill levels Revenue from taxation on fuels etc Revenue from sales of product Revenue from exports of products
7
The Chemical Industry Research chemists identify a chemical route to make a new product, using available reactants.
8
The Chemical Industry Feasibility study produces small amounts of product – to see if the process will work
9
The Chemical Industry The process is now scaled up to go into full scale production. Process so far will have taken months. Many problems will have been encountered and will have to be resolved before full scale production commences
10
The Chemical Industry Chemical plant is built in a suitable site
Operators employed Early production will allow monitoring of cost, safety, pollution risks, yield and profitability
11
The Chemical Industry Unreacted feedstocks recycled SEPARATOR MIXER
REACTION VESSEL BY-PRODUCT PRODUCT
12
The Chemical Industry - Feedstocks
Fossil fuels Coal, oil and natural gas Metallic ores Haematite to make iron, Bauxite to make aluminium Minerals Limestone needed in Blast furnace Air Supplies O2 and N2 Water Can be used as a reactanct or as a coolant or in heat exchangers. Fossil fuels Metallic ores
13
The Chemical Industry Can be Continuous process
Or can be Batch Process
14
The Chemical Industry Continuous Process
Used by big industries where large quantities of product are required Requires small workforce Often automated / computer controlled Quality of product checked remotely Energy efficiency usually good Plants expensive to build Plants not flexible
15
The Chemical Industry Batch Process
Make substance which are required in smaller amounts Process looks more like the initial reaction Overhaul of system needed regularly – time and energy lost if plant has to be shut down Plant can be more flexible Plant is usually less expensive to build initially
16
The Chemical Industry: The Costs Involved
Example Capital costs Building the plant Road and rail links (Usually needs a substantial bank loan) Fixed costs (Stay the same regardless of whether plant runs at full or half capacity) Repayment of loan Wages, Council tax Variable costs (Vary dependent on whether plant is running at full or half capacity.) Cost of raw materials, and other chemicals required
17
The Chemical Industry Industries can be classed as: Labour intensive
Capital intensive
18
The Chemical Industry Service industries (Catering, education, healthcare), are labour intensive
19
The Chemical Industry Chemical industry tends to be more Capital intensive as a large investment is required to buy equipment and build plants
20
The Chemical Industry Expectations of work safety and a clean environment increase during the twentieth century H & S legislation protects workforce
21
The Chemical Industry Tradition is important – steel making continues in areas where it was set up even if raw materials are no longer available locally Transport options are important
22
The Chemical Industry Choice of a particular chemical route is dependent upon: Cost of raw materials Suitability of feedstocks Yield of product Option to recycle unreacted feedstock Marketability of by products Costs of getting rid of wastes, and safety considerations for workforce and locals Prevention of pollution
23
The Chemical Industry Click here to repeat The Chemical Industry.
Click here to return to the Menu Click here to End.
24
Hess’s Law
25
Hess’s law Hess’s law states that the enthalpy change for a chemical reaction is independent of the route taken. This means that chemical equations can be treated like simultaneous equations. Enthalpy changes can be worked out using Hess’s law.
26
Hess’s law Calculate the enthalpy change for the reaction: C(s) + 2H2(g) CH4(g) using the enthalpies of combustion of carbon, hydrogen and methane.
27
Hess’s law First write the target equation.
28
Hess’s law C(s) + 2H2(g) CH4(g) DH=? Then write the given equations.
29
Hess’s law C(s) + 2H2(g) CH4(g) DH=? C + O2 CO2 DH= -394 kJ
H2 + ½ O2 H2O DH= -286 kJ CH4+ 2O2 CO2 + 2H2O DH=-891 kJ
30
Hess’s law C(s) + 2H2(g) CH4(g) DH=?
Build up the target equation from the given equations. If we multiply we must also multiply DH. If we reverse an equation we reverse the sign of DH.
31
Hess’s law C(s) + 2H2(g) CH4(g) DH=? C + O2 CO2 DH= -394 kJ
32
Hess’s law C(s) + 2H2(g) CH4(g) DH=? C + O2 CO2 DH= -394 kJ
H2 + ½ O2 H2O DH= -286 kJ
33
Hess’s law C(s) + 2H2(g) CH4(g) DH=? C + O2 CO2 DH= -394 kJ
2H2 + O2 2H2O DH= -572 kJ
34
Hess’s law C(s) + 2H2(g) CH4(g) DH=? C + O2 CO2 DH= -394 kJ
2H2 + O2 2H2O DH= -572 kJ CH4 + 2O2 CO2+2H2O DH=-891 kJ
35
Hess’s law C(s) + 2H2(g) CH4(g) DH=? C + O2 CO2 DH= -394 kJ
2H2 + O2 2H2O DH= -572 kJ CO2+2H2O CH4 + 2O2 DH=+891 kJ
36
Hess’s law C(s) + 2H2(g) CH4(g) DH=? C + O2 CO2 DH= -394 kJ
2H2 + O2 2H2O DH= -572 kJ CO2+2H2O CH4 + 2O2 DH=+891 kJ
37
Hess’s law C(s) + 2H2(g) CH4(g) DH=?
We can add all the equations, striking out species that will appear in equal numbers on both sides.
38
Hess’s law C(s) + 2H2(g) CH4(g) DH=? C + O2 CO2 DH= -394 kJ
2H2 + O2 2H2O DH= -572 kJ CO2+2H2O CH4 + 2O2 DH=+891 kJ
39
Hess’s law C(s) + 2H2(g) CH4(g) DH=? C + O2 CO2 DH= -394 kJ
2H2 + O2 2H2O DH= -572 kJ CO2+ 2H2O CH4 +2O2 DH=+891 kJ C + 2H2 CH4 DH=(-394 – )kJ = -75 kJ
40
Hess’s law C(s) + 2H2(g) CH4(g) DH=? C + O2 CO2 DH= -394 kJ
2H2 + O2 2H2O DH= -572 kJ CO2+ 2H2O CH4 +2O2 DH=+891 kJ C + 2H2 CH4 DH=-75 kJ
41
Hess’s Law Click here to repeat Hess’s Law.
Click here to return to the Menu Click here to End.
42
Equilibrium
43
Dynamic Equilibrium Reversible reactions reach a state of dynamic equilibrium The rates of forward and reverse reactions are equal. At equilibrium, the concentrations of reactants and products remain constant, although not necessarily equal.
44
Changing the Equilibrium
Using a catalyst does not change the position of the equilibrium. A catalyst speeds up both the forward and back reactions equally and so the equilibrium is reached more quickly.
45
Changing the Equilibrium
Changes in concentration, pressure and temperature can alter the position of equilibrium. Le Chatelier’s Principle states that when we act on an equilibrium the position of the equilibrium will move to reduce the effect of the change.
46
Concentration Consider the equilibrium: A + B C + D
If we increase the concentration of A, we speed up the forward reaction. This results in more C and D being formed.
47
Br2(aq) + H2O(l) 2H+(aq) + Br-(aq) + BrO-(aq)
Concentration Consider the equilibrium: Br2(aq) + H2O(l) 2H+(aq) + Br-(aq) + BrO-(aq) The solution is red-brown, due the Br2 molecules. If we add sodium bromide, increasing the concentration of Br-, we favour the RHS and so the equilibrium moves to the left. The red-brown colour will increase.
48
Pressure Remember: 1 mole of any gas has the same volume (under the same conditions of pressure and temperature). This means that the number of moles of has are the same as the volumes.
49
Pressure Increasing pressure means putting the same number of moles in a smaller space. This is the same as increasing concentration. To reduce this effect the equilibrium will shift so as to reduce the number of moles of gas.
50
Pressure Increasing pressure favours the side with the smaller volume of gas. Consider: N2O4(g) 2NO2(g) 1 mole moles 1 volume volumes If we increase the pressure we favour the forward reaction, so more N2O4 is formed.
51
Temperature An equilibrium involves two opposite reactions.
One of these processes must release energy (exothermic). The reverse process must take in energy (endothermic).
52
Temperature First consider an exothermic reaction.
53
Exothermic Reaction This is the distribution of molecular energy
54
These molecules have sufficient energy to react
Activation Energy
55
Now increase the molecular energy by heating
56
Now these can react
57
Increasing temperature leads to a small increase
in the number of molecules with sufficient activation energy
58
Temperature Now consider an endothermic reaction.
59
Endothermic Reaction This is the distribution of molecular energy
60
These molecules have sufficient energy to react
Activation Energy
61
Now increase the molecular energy by heating
62
Now these can react.
63
Increasing temperature leads to a greater increase
in the number of molecules with sufficient activation energy
64
Temperature The percentage increase in the number of molecules with sufficient activation energy is much greater in the endothermic reaction, compared to the exothermic reaction.
65
Thus both the endothermic and exothermic processes are speeded up by increasing temperature.
However an increase in temperature has a greater effect on the endothermic process.
66
Increasing temperature favours the endothermic side of the equilibrium
Increasing temperature favours the endothermic side of the equilibrium. Consider: N2O4(g) 2NO2(g) DH= +58 kJ If we increase the temperature we favour the forward reaction so more NO2 is formed.
67
The Haber Process The Haber process involves the preparation of ammonia from nitrogen and hydrogen. N H2 2NH3 DH = -88 kJ We shall look at the factors affecting this equilibrium.
68
The Haber Process N2 + 3H2 2NH3 DH = -88 kJ
A catalyst of finely divided iron is used to increase the reaction speed and so shorten the time needed to reach the equilibrium.
69
The Haber Process N2 + 3H2 2NH3 DH = -88 kJ 1 mole 3 moles 2 moles
1 vol 3 vols 2 vols 4 vols 2 vols Since the RHS has a lower volume of gas than the LHS, higher pressure will favour the production of ammonia. A reaction chamber to withstand the higher pressure will cost much more.
70
The Haber Process N2 + 3H2 2NH3 DH = -88 kJ
Since the forward reaction is exothermic more ammonia will be produced at low temperatures. At low temperatures the reaction is very slow so the rate of production of ammonia is low.
71
The Haber Process N2 + 3H2 2NH3 DH = -88 kJ
To ensure maximum conversion the unreacted gases are recycled through the reaction chamber after reaction.
72
The Haber Process N2 + 3H2 2NH3 DH = -88 kJ
To achieve the most profitable production of ammonia the following conditions are used: iron powder as catalyst 250 atmospheres pressure temperature of 500oC - 600oC
73
The Haber Process Unreacted N2 + H2 recycled SEPARATOR REACTION MIXER
Chamber Fe catalyst NH3
74
Equilibrium Click here to repeat Equilibrium.
Click here to return to the Menu Click here to End.
75
Acids and Bases
76
pH pH is a scale of acidity. It can be measured using: pH paper
Universal Indicator solution A pH meter.
78
We carry out an experiment where we progressively dilute acid.
Tube 1 10 ml 0.1 mol/l hydrochloric acid
79
Transfer 1 ml of acid from Tube 1 Tube 2
80
Add 9 ml of water to Tube 2 0.01 mol/l hydrochloric acid Tube 2
81
Repeat this process five more times so you have a series test tubes.
82
Concentrations are: [H+]
83
Add Universal Indicator:
[H+] pH
84
Look for a relationship between the concentration of acid and the pH.
If [H+] = 10-x pH = x
85
We repeat the experiment but this time we progressively dilute alkali.
Tube 1 10 ml 0.1 mol/l sodium hydroxide
86
You now have five test tubes, numbered as below.
87
Concentrations are: [OH-]
88
Add Universal Indicator:
[OH-] pH
89
Look for a relationship between the concentration of alkali and the pH.
If [OH-] = 10-y pH = 14-y
90
[H+] mol/l pH [OH-] mol/l 10-1 1 13 10-2 2 12 10-3 3 11 10-4 4 10 10-5 5 9 10-6 6 8 10-7 7
91
H2O(l) H+(aq) + OH-(aq)
If we look at water, pH=7 [H+] = [OH-] = 10-7 mol/l [H+] x [OH-] = mol2/l2 This is due to the equilibrium in water: H2O(l) H+(aq) + OH-(aq) For any solution
92
Thus we can find [H+] for any solution.
What is [H+] of a solution with pH 10? [OH-] = 10-4 mol/l [H+] x 10-4 = mol2/l2 Thus [H+] = 10-10
93
Strong and Weak Acids A strong acid is one which completely dissociates in solution: HCl(aq) H+(aq) + Cl-(aq) A weak acid is one which partially dissociates in solution: CH3CO2H(aq)H+(aq) + CH3CO2-(aq)
94
We can compare eqimolar solutions of strong and weak acids e. g
We can compare eqimolar solutions of strong and weak acids e.g. 0.1 mol/l hydrochloric acid and 0.1 mol/l ethanoic acid. We compare pH, conductivity, reaction rates and stoichiomery.
95
Test 100 ml 0.1 mol/l HCl 100 ml 0.1 mol/l CH3CO2H pH 1 3 Conductivity Very high Low Rate of reaction Fast Slow Stoichiomery Reacts with 0.4 g NaOH
96
The differences between the properties of strong and weak acids are caused by the fact that weak acids contain many fewer H+ ions than strong acids. Both acids can produce the same number of H+ ions, its just that weak acids do so more slowly.
97
Weak Acids Solutions of ethanoic acid, carbon dioxide and sulphur dioxide are weak acids. CH3CO2H(aq)H+(aq) + CH3CO2-(aq) CO2(g) + H2O(l) H2CO3(aq) H2CO3(aq) 2H+(aq) + CO32-(aq) SO2(g) + H2O(l) H2SO3(aq) H2SO3(aq) 2H+(aq) + SO32-(aq)
98
Strong and Weak Bases A strong base is one which completely dissociates in solution: NaOH(aq) Na+(aq) + OH-(aq) A weak base is one which partially dissociates in solution: NH4OH(aq)NH4+(aq) + OH-(aq)
99
We can compare eqimolar solutions of strong and weak bases e. g
We can compare eqimolar solutions of strong and weak bases e.g. 0.1 mol/l sodium hydroxide and 0.1 mol/l ammonium hydroxide. When we compare pH, conductivity, reaction rates and stoichiomery we find similar results to the comparison of weak and strong acids.
100
NH3(g) + H2O(l) NH4OH(aq) NH4OH(aq) NH4+(aq) + OH-(aq)
Weak Bases A solution of ammonia is a weak base. NH3(g) + H2O(l) NH4OH(aq) NH4OH(aq) NH4+(aq) + OH-(aq)
101
Acids + Bases A strong acid and a strong base produce a salt which is neutral. A strong acid and a weak base produce a salt which is acidic. A weak acid and a strong base produce a salt which is basic.
102
Basic Salts
103
Basic Salts Sodium carbonate is completely ionised.
104
Na2CO3(aq) 2Na+(aq) + CO32-(aq)
Basic Salts Sodium carbonate is completely ionised. Na2CO3(aq) 2Na+(aq) + CO32-(aq)
105
Na2CO3(aq) 2Na+(aq) + CO32-(aq)
Basic Salts Sodium carbonate is completely ionised. Na2CO3(aq) 2Na+(aq) + CO32-(aq) Water is also present.
106
Na2CO3(aq) 2Na+(aq) + CO32-(aq)
Basic Salts Sodium carbonate is completely ionised. Na2CO3(aq) 2Na+(aq) + CO32-(aq) Water is also present. H2O(l) H+(aq) + OH-(aq)
107
Na2CO3(aq) 2Na+(aq) + CO32-(aq) The ions set up an equilibrium.
Basic Salts Sodium carbonate is completely ionised. Na2CO3(aq) 2Na+(aq) + CO32-(aq) Water is also present. H2O(l) H+(aq) + OH-(aq) The ions set up an equilibrium.
108
Basic Salts Sodium carbonate is completely ionised.
Na2CO3(aq) 2Na+(aq) + CO32-(aq) Water is also present. H2O(l) H+(aq) + OH-(aq) The ions set up an equilibrium. 2H+(aq) + CO32-(aq) H2CO3(aq)
109
Basic Salts This removes of H+(aq) from water.
H2O(l) H+(aq) + OH-(aq)
110
Basic Salts This removes of H+(aq) from water.
H2O(l) H+(aq) + OH-(aq) The OH-(aq) left behind make the resulting solution basic.
111
Acid Salts
112
Acid Salts Ammonium chloride is completely ionised.
113
NH4Cl(aq) NH4+(aq) + Cl-(aq)
Acid Salts Ammonium chloride is completely ionised. NH4Cl(aq) NH4+(aq) + Cl-(aq)
114
NH4Cl(aq) NH4+(aq) + Cl-(aq)
Acid Salts Ammonium chloride is completely ionised. NH4Cl(aq) NH4+(aq) + Cl-(aq) Water is also present.
115
NH4Cl(aq) NH4+(aq) + Cl-(aq)
Acid Salts Ammonium chloride is completely ionised. NH4Cl(aq) NH4+(aq) + Cl-(aq) Water is also present. H2O(l) H+(aq) + OH-(aq)
116
NH4Cl(aq) NH4+(aq) + Cl-(aq)
Acid Salts Ammonium chloride is completely ionised. NH4Cl(aq) NH4+(aq) + Cl-(aq) Water is also present. H2O(l) H+(aq) + OH-(aq) The ions set up an equilibrium.
117
NH4Cl(aq) NH4+(aq) + Cl-(aq)
Acid Salts Ammonium chloride is completely ionised. NH4Cl(aq) NH4+(aq) + Cl-(aq) Water is also present. H2O(l) H+(aq) + OH-(aq) The ions set up an equilibrium. NH4+(aq) + OH-(aq) NH4 OH(aq)
118
Acid Salts This removes of OH-(aq) from water.
H2O(l) H+(aq) + OH-(aq)
119
Acid Salts This removes of OH-(aq) from water.
H2O(l) H+(aq) + OH-(aq) The H+(aq) left behind make the resulting solution acidic.
120
Acids and Bases Click here to repeat Acids and Bases.
Click here to return to the Menu Click here to End.
121
Redox Reactions
122
Zn(s) + Cu2+(aq) Zn2+(aq) + Cu(s)
Redox An oxidation reaction is one where electrons are lost. Zn(s) Zn2+(aq) + 2e A reduction reaction is one where electrons are gained. Cu2+(aq) + 2e Cu(s) A redox reaction is one in which both oxidation and reduction are occurring. Zn(s) + Cu2+(aq) Zn2+(aq) + Cu(s)
123
Redox An oxidising agent is a substance which accepts electrons.
This means that an oxidising agent must itself be reduced.
124
Redox A reducing agent is a substance which donates electrons.
This means that a reducing agent must itself be oxidised.
125
Redox We should be able to recognise oxidising and reducing agents from the reaction equation. 5Fe MnO H+ 5Fe Mn H2O Fe2+ is oxidised to Fe3+ so MnO4– acts as an oxidising agent.
126
Writing Ion-Electron Equations.
Simple equations can be obtained from the data booklet. More complex equations are written using the following routine.
127
Writing Ion-Electron Equations.
Write the reactants and products. 2IO3- I2 Add H2O to the side with less oxygen. 2IO3- I2 + 6H2O Add H+ to the other side. 2IO H+ I2 + 6H2O Balance charge by adding electrons. 2IO H+ + 10e- I2 + 6H2O
128
Combining Oxidation and Reduction Equations.
Combining the ion-electron half equations produces the overall reaction equation. This must be done so that the number of electrons on opposie sides are equal, and so cancel each other out.
129
Combining Oxidation and Reduction Equations.
130
Combining Oxidation and Reduction Equations.
2IO H+ + 10e- I2 + 6H2O
131
Combining Oxidation and Reduction Equations.
2IO H+ + 10e- I2 + 6H2O Reduction
132
Combining Oxidation and Reduction Equations.
2IO H+ + 10e- I2 + 6H2O Reduction SO32- + H2O SO42- +2H+ + 2e-
133
Combining Oxidation and Reduction Equations.
2IO H+ + 10e I2 + 6H2O Reduction multiplied by 5 5SO H2O 5SO H++ 10e
134
Combining Oxidation and Reduction Equations.
Add the equations 2IO H+ + 10e I2 + 6H2O 5SO H2O 5SO H++ 10e 2IO H+ + 5SO32- I2 + H2O + 5SO42- We now can extract the mole relationship – 2 moles iodate react with 5 moles of sulphite
135
Redox Titrations. These can be carried out to calculate concentration.
Many use permanganate or starch/iodine reactions which are self-indicating – the colour change of the reaction tells you when the end point is reached.
136
Redox Titrations. It was found that 12.5 ml of of 0.1 mol/l acidified potassium dichromate was required to oxidise the alcohol in a sample of 1 ml of wine. Calculate the mass of alcohol in 1 ml of wine.
137
Redox Titrations. Equations: Cr2O72-+14H+ + 6e 2Cr 3+ + 7H2O
C2H5OH + H2O CH3COOH +4H++4e Mole Relationship 2 moles dichromate react with 3 moles ethanol 1 mole dichromate react with 1.5 moles ethanol
138
Redox Titrations. 12.5 ml of 0.1 mol/l dichromate contain x0.1 moles dichromate. 1.25x10-3 moles Moles of alcohol = 1.25x10-3 x1.5 = 1.875x10-3 Mass of alcohol = 46 x 1.875x10-3 g = g
139
Electrolysis Electrolysis takes place when electricity is passed through an ionic liquid. Chemical reaction take place at the electrodes – reduction at the negative electrode and oxidation at the positive electrode.
140
Electrolysis The electrode reactions can be represented by ion electron equations. In the electrolysis of nickel(II) chloride the reactions are: + electrode 2Cl- Cl e - electrode Ni e Ni
141
Electrolysis + electrode 2Cl- Cl2 + 2e - electrode Ni2+ + 2e Ni
In both of these ion electron equations one mole of product is produced by two moles of electrons.
142
The Faraday To find the value for one mole of electrons multiply Avogadro’s number by the charge on the electron (1.6x10-19 coulombs) One mole of electrons is called a Faraday and is 96,500 coulombs.
143
The Faraday Using the value for the Faraday and the equation:
Charge = Current x Time (Coulombs) (Amps) (Seconds) we can carry out many calculations.
144
Redox Reactions Click here to repeat Redox Reactions.
Click here to return to the Menu Click here to End.
145
Nuclear Chemistry
146
Stable nuclei Nuclei contain protons and neutrons.
Energy is needed to hold these particles together. We can plot the number of protons against the number of neutrons.
147
Stable nuclei
148
Stable nuclei All stable nuclei fit in a narrow band
Some nuclei are unstable because they need too much energy to hold them together. Thus they split apart, sending out some small particles.
149
Radioactive decay Particle Symbol Nature Stopped by alpha a
Sheet of paper beta b Few cm of aluminium gamma g radiation Many cms of lead
150
a decay a decay takes place when the nucleus ejects a helium nucleus.
This causes a change in the nucleus.
151
b decay b decay takes place when the nucleus ejects an electron.
This causes a change in the nucleus.
152
g decay g decay takes place when the nucleus loses energy.
This is the extra energy which is no longer needed to hold the nucleus together.
153
Nuclear Equations When we write a nuclear equation the sum of the mass numbers and atomic numbers on each side must be equal.
154
Half life Half life is the time which it takes for the radioactivity to half. For any radioactive substance this time is constant.
155
Half life The decay of individual nuclei within a sample is random and is does not depend of chemical or physical state of the element. Half lives of individual elements may vary from seconds to thousands of years.
156
Half life Calculations involving half life usually involve precise fractions e.g. 3H is a b-emitting isotope with a half life of 12.3 years. How long will it take for the radioactivity of a sample to drop to 1/8 of its original value?
157
Half life 3H is a b-emitting isotope with a half life of 12.3 years. How long will it take for the radioactivity of a sample to drop to 1/8 of its original value? Time y 24.6y 36.9y Fraction ½ ¼ 1/8
158
Half life For examples where the numbers are more complex the quantity of radioactive material against time is best estimated from a graph.
159
Half life Activity Time
160
The Nuclear Chemistry Click here to repeat Nuclear Chemistry.
Click here to return to the Menu Click here to End.
161
Hope you found the revision useful.
The End Hope you found the revision useful. Come back soon!!
Similar presentations
© 2024 SlidePlayer.com Inc.
All rights reserved.