1. LED Lighting

2. Agenda Introductions Lighting Definitions LEDs Benefits
LED Luminaire Construction
Evaluating an LED System
Crouse Hinds LED Products
System Reliability
Summary

3. Lighting Definitions 60% lumen maintenance at 4K hours (175W MH)
Delivered lumens – light output delivered after effects of optical losses, heat, etc..
Luminaire Efficacy
Fixture lm/watt including optics, thermal , driver losses
Lumen Maintenance
The ability to retain light output over a specified period of time.
Most LED packages rated at 70% lumen maintenance at 60K hours (L70)
60% lumen maintenance at 4K hours (175W MH)
A well designed LED luminaire can deliver equal or better foot candles or Lux to the work surface equating to higher overall system efficacy

4. Light Source Comparison
Light Type
Data Sheet lm/W
Usable* lm/W
Lifetime (hrs)
Incandescent 17
10-17 3k
Halogen 20
12-20
10k
T12 fluorescent 60
45-50
20k
Metal halide 70
<40
5k-15k
T8 fluorescent 74
55-60
Best-in-Class Power LED
120
55-75
> 60k
High-pressure sodium 91
<50
20-24k
T5 fluorescent
107 96
Low-pressure sodium
65-70
18k
* Usable lm/w – What is actually delivered

5. Lumen Maintenance and System Life
Lighting design should consider the mean (average) delivered lumens when determining lighting requirements.

6. LED Benefits Long Life Light Source Highly reliable solid state device
LEDs rarely fail catastrophically
Life based on maintained lumens
Excellent lumen maintenance
> 70% sustained lumens at 60K hours
Requires a good engineering design
Eliminates frequent lamp replacement
Typical HID 7K to 15K
LEDs can provide more useable light over a long period of time reducing maintenance cost & increasing workplace safety through proper lighting levels

7. LED Benefits Energy Efficient
Up to 50% energy savings compared to some conventional lighting technologies
100W LED system can replace a 175W Metal Halide system
End users will realize a lower cost of ownership through reduced maintenance and energy savings

8. LED Benefits Durable Light Source Directional & point light source
Contain no filaments or glass
Not susceptible to vibration
Directional & point light source
Minimizes wasted light
Improves fixture efficacy
Allows for innovative lighting fixtures
LED

9. LED Benefits Instant Start Environmentally Friendly
Requires no warm up
No loss of light at cold temperature
Environmentally Friendly
Contains no mercury
Energy efficient
Eliminate disposal issues
ROHS / LEED Compliant

10. Where to Consider LED Use LED where appropriate
Where maintenance is frequent, costly or challenging
Where there is a need to reduce energy
Areas requiring better visibility
Areas requiring instant-on illumination
LEED / ROHS Compliancy
Marine-Port-Pier
The value added benefits of lower cost of ownership, Green Lighting, & better lighting will offset the initial cost impact of an LED system.

11. LED Family of Lighting
Vaporguard
Egress

12. Champ® VMV LED Class I, Division 2 LED Luminaire

13. Markets / Applications
Class I, Division 2 locations
Platforms and Refineries
Chemical and Petrochemical Plants
Mining
Outdoor & Indoor Industrial Locations
Class II, Div 1
Grain Mills, Sugar processing
Pharmaceutical
Ideal Application
Areas requiring safe, reliable lighting
Areas requiring continuous illumination throughout the day
Areas requiring instant illumination
Areas where access to re-lamping is difficult or costly

14. Key Features & Benefits
Performance
100,000 hour performance & 60,000 hours rated life
Maintains 70% lumen output through 60,000 hours
Eliminates need for frequent lamp replacement
Energy efficient
Replaces many 100W to 250W HID
50 to 60% Energy savings typical
Instant illumination and restrike
Better visibility with crisp white light
Construction
Easy installation – uses existing Champ Mounting
Modular & compact design for ease of upgrade or service
Durable and vibration-resistant Led light source
“No lights-out” feature – if a single LED fails, circuit provides enough useable light to remaining LEDs

15. Champ LED Construction
Uses existing Champ Mounting modules – Facilitates easy retrofit to existing Champ VMV, DMV, LMV
(2) High performance/efficient LED power supplies provide regulated current to LED arrays
Heatsink – engineered to effectively remove heat from the LED and the driver increasing system reliability

16. Champ LED Construction
LED housing assembly is designed to allow for future upgrade or replacement.
(6) High power multi die LED arrays provide instant on and full illumination
Impact resistant glass lens. No globe or guard required

17. LED Power supply assembly
Champ Assembly
LED Power supply assembly
LED lamp sub-assembly
The modular construction of the LED Champ was designed to facilitate future maintenance requirements

18. Key Features & Benefits
Reliable performance in any environment
Designed for Hazardous Locations
Gas, Dust and Fiber
Ambient suitability for -40º to 55ºC
Low temperature starting - 30º C
T5 temperature rating
Safely operates in the most hazardous environments
Type 4X, marine outdoor locations, IP66 rated
Bright and white and “green” all over
Low energy consumption
Contains no mercury or other hazardous substances
“No lights-out” feature – if a single LED fails, circuit provides enough useable light to remaining LEDs
Realize a lower cost of ownership through reduced maintenance and lower cost of operation!

19. Suggested Replacement
VMV LED Series
VMV5L
VMV7L
VMV9L
Suggested Replacement
Metal Halide
100W
150W-175W
200W
HPS
70W-100W
150W
Mercury
175W
250W
Induction
85W
165W
Typical Mounting
Up to 10ft
10 to 18ft
18ft to 25ft
Input Watts 70 98
Delivered Lumens
3778
5706
6340
Lamp comparisons are based on average foot-candles when measured using Photopic Photometry

20. Light distribution comparison
Better avg. foot-candles
Compared to 175W MH, The VMV7L provides more effective light on the target work area with a 50% energy savings

21. Lighting Comparison
Compared to 100W HPS, The VMV5L provides more effective light on the target work area with a 40% energy savings

22. Support Tools Lighting layout services
Economic analysis ROI calculator
Customer Success

23. Lighting Layout

24. Room Renderings

25. ROI Input

26. ROI Summary

27. Eastman Chemical
Customer Trial

28. Dominion Power Install
Customer Install units

29. Customer Install 120 + units
OXYCHEM Install
Customer Install units

30. EVLED Class I Div 1 Features & Benefits Safety
Long Life; up to 60K hours
Energy efficient (< 40Watts)
Instant Illumination
Cold temperature operation (-30C)
Environmentally friendly
Safety
T6 temperature rating at 55C
Users will realize a lower cost of ownership through reduced maintenance and lower cost of operation!

31. Plattsburgh WWTP

32. Enhance safety and productivity
LED Lantern Class I Div 1
Enhance safety and productivity
12 hours on time
Induction charging system
First Responders, HazMat Team
Five LED light patterns
On/off
Flashing
Rotating
SOS mode – front and rear flash blue SOS simultaneously
“No lights-out” feature – if a single LED fails, circuit provides enough useable light to remaining LEDs
Users will realize increase workplace flexibility with portable lighting solutions

33. LED Exit Signs Ex-Lite Series CCH UX Series Hazardous locations
Class I div 2, Class II div 2
Class 1 Zone 1
Specification grade luminaire
CCH UX Series
Value Line Exit luminaire
Industrial & commercial applications
Wet location rated
Optional hazardous location
Class I div 2

34. Markets / Applications
Class I, Division 2 locations
Platforms and Refineries
Chemical and Petrochemical Plants
Mining
Wastewater and Sewage Treatment Plants
Pharmaceutical
Outdoor & Indoor Industrial Locations
For the targeted illumination of:
Tanks
Instrument panels
Switch racks
Storage areas
Pathways
Security areas

35. LED Vaporgard Coming August 2010 LED Vaporgard
NEC / CEC (Pending June 2010)
Class I Div 2/Zone 2, Class II/Zone 22
IEC Ex/ATEX (Pending July 2010)
Ex II 2 G D IP66
Ex nA T5 (-30 to 40C)
Coming
August 2010
Customer Benefits:
150W Incandescent Equivalent
30X Longer Life – 60K Hours
75% more energy efficient (25Watts)
Pays for itself in 2 years or less
Maintenance Free
Reduced Energy Consumption
Modular design for retrofit applications

36. N2LPS LED Light Pak
Durable and marine rated LED lamp head assemblies with watertight glands provide protection against water ingress, corrosion, and impact
Steel bracket design offers superior protection against impact
External self test/diagnostic status indicator provides up to date unit status reduces costly labor
Standard battery disconnect switch prevents battery discharge when servicing an area
High temperature rated Ni-Cad battery for operation in ambient temperatures (0ºC to 55ºC)
Gasketed and sealed Krydon power supply assembly

37. Technology & Innovation
Obstruction Lighting

38. Key Features & Benefits
LET US DO THE WORK !
System Integration
Lighting Products
Controls
Technical Support
Cutting Edge Products
LED Obstruction
LED Visual Signal
Cooper Crouse Hinds offers complete systems and customized packages, providing application based solutions that meet customer need

39. THANK YOU! ?