1. Ornl Serial Software: A User’s View Ray Juras, ornl November 14, 2000

2. Topics: Motivation What was done Details of device-specific module creation Summary

3. Motivation The HRIBF control system is being moved from Vsystem to EPICS. All serial device interfaces must be migrated. We chose to use VxWorks/x86 with SBS serial IndustryPacks (existing system used VME, but PC’s are less expensive allowing deployment nearer controlled equipment). Appropriate VxWorks driver was needed. One serial device (Omega cn76000) requires checksum generation. We did not see how to implement this using devAscii. New serial device support, ornlSerial, was created. Other serial devices also require special treatment. Some require inter-character and inter-command delays.

4. Support Software John Sinclair developed the following: VxWorks driver for x86/PCI SBS IndustryPack. Serial driver support. Device-independent serial device support. Device manager to configure devices (baud, etc.) at start time. Each serial device requires a device- dependent module

5. Database Fields The database fields related to ornlSerial are as shown below:

6. Associated Device Manager Unit Number Definitions

7. Module Functions Each device-specific module must provide the following functions: initCalled once per manf/model createCalled once per pv encodeValCalled before a write operation decodeRspCalled after a write operation encodeCmdCalled before a read operation decodeValCalled after a read operation

8. Module Functions For a particular pv, code only needs to be added to a subset of functions. Often, only “create” definitions are needed. For example, a pv to turn a power supply on may only need code in “create” to define the ascii send string (including termination). A pv to read current from a power supply may only require code in “create” to define the command and code in “decodeVal” to decode the returned value.

10. Aids Make Debugging Serial Modules Easy

11. Serial Devices Interfaced Omega CN76000 temperature controller. Varian Multigauge vacuum controller. Granville-Phillips GP307 vacuum controller Danfysik models 8000 and 8800 power supplies. Group3 Digital Teslameters (Hall Probes). Metrolab PT2025 NMR.

12. Summary VxWorks/x86/PCI driver developed for IndustryPack I/O. Ornl serial device support developed Useful for cases when devAscii is not flexible enough (for example, checksums required). But, requires (simple) programming of device- specific modules. Device Manager for configuration (Baud, parity, etc).