1. Cable for UPAMD Steve Sedio Foxconn 8/02/2011

2. Requirements: Power, 25 milliohms max – AWG selected by worst case resistance and operation at 50C Signal – Option #1, Single ended – 50 – 60 ohms – Option #2, Balanced – 100 – 120 ohms – Data rate frequency, 500KHz – Power - is also RF ground (no separate ground). Drain wires would tie to power – in the plug. Waiting for capacitance / inductance

3. Foxconn Recommendation Single Ended Signal, Shield Made from Spiral (Power+ and Power -) Power + Single Ended Signal Wire Insulation Power - & AC Ground Inner Jacket Outer Jacket Wire Gauges for Cable Cable Dia - mm Reach in MPower AWGSig AWG 108248.7 51128 7.6 41228 7.2 31329 7.2 21531 5.8 1.51632 5.4 11834 4.5 0.52134 4

4. Power + Balanced Signal pair Wire Insulation Power - & AC Ground Inner Jacket Outer Jacket Wire Gauges for Cable Cable Dia - mm Reach in MPower AWGSig AWG 108248.7 511286.8 412286.8 313296.0 215315.2 1.516325.2 118344.5 0.521344.2 Add - Foxconn Recommendation Balanced Signal, Shield Made from Spiral (Power+ and Power -)