1. Computer Setup for EDA Tools Murali Dharan January 11, 2013 ELEC5270/6270 Spring 2013 Low-Power Design of Electronic Circuits 1/11/2013 1

2. Software needed SeureCRT WinSCP Cisco AnyConnect VPN Client http://www.auburn.edu/oit/vpn/ Xming Download the 1 st three setup files from AU Install. https://fp.auburn.edu/oit/hardware_software/auinstall/login.aspx https://fp.auburn.edu/oit/hardware_software/auinstall/login.aspx 1/11/2013 2

3. SecureCRT Download and run the SecureCRT setup. After installation, run the program. Choose Engineering and click connect. If prompted, enter your credentials. 1/11/2013 3

4. WinSCP Download and install WinSCP from setup. Choose File Protocol as “SFTP”. Host name: scp.eng.auburn.edu Port no.: 22 Enter your credenials. Leave private key as blank. Click Login, you may be asked to save a key, accept it. 1/11/2013 4

5. XMing Download Xming from http://www.straightrunni ng.com/XmingNotes/ http://www.straightrunni ng.com/XmingNotes/ Download and install the circled setup files. When installing X-Ming fonts, make sure to select all the fonts. 1/11/2013 5

6. Troubleshooting Make sure to run XMing first before running SecureCRT so as to run the EDA Tools. If you want to access the tools or your filesfrom off campus, make sure to run Cisco AnyConnect VPN first. You cannot name only an.ext file (.bashrc) in Windows, it has to be done in the shell prompt (SecureCRT). Open shell prompt (SecureCRT), type “mv sample.bashrc.bashrc”. This creates your.bashrc file which loads all the CAD libraries when you start CRT. If you already have a.bashrc file set up, you can copy the contents of the sample file into your original file. 1/11/2013 6