1. 目录 SB-CMS-8in1 Features ● 1 PIR motion sensor ● 1 Lux sensor ● 2 Dry contact inputs ● 2 external condition inputs ● IR(infrared) receiver ● IR(infrared) transmitter ● security alarm function (work with Security Module) ● 32 configurable logics

2. Subnet ID and Device ID Device remark Change the ID if needed. Uncheck them if you feel the LED is annoying.

3. Input a range to be involved. Select a code and upload it to the 8in1, it will be shown in the left table. Test the code in 8in1

4. The 8 keys here matches with the 8 keys of SB-HHR-D (default mode.)

5. Select key control mode Sav e

6. Assign targets Save

7. Test the IR receiver of 8in1 NOTE: make sure the remote is in default mode (please refer to doc for SB-HHR-D.)

8. e.g., you can enable/disable the PIR sensor here in HDL-BUS Pro software, you can also send UV switch 253-ON to enable it, or send UV switch 253-OFF to disable it.

9. Combine logic inputs Select logic relation sav e Set logic output

10. Please refer to 12in1 sensor application