Presentation is loading. Please wait.

Presentation is loading. Please wait.

1 Pertemuan 20 Network Testing. Discussion Topics Introduction to network testing Using a structured approach to troubleshooting Testing by OSI layers.

Published byMagnus Byrd Modified over 8 years ago

Similar presentations

Presentation on theme: "1 Pertemuan 20 Network Testing. Discussion Topics Introduction to network testing Using a structured approach to troubleshooting Testing by OSI layers."— Presentation transcript:

1 1 Pertemuan 20 Network Testing

2 Discussion Topics Introduction to network testing Using a structured approach to troubleshooting Testing by OSI layers Layer 1 troubleshooting using indicators Layer 3 troubleshooting using ping Layer 7 troubleshooting using Telnet 2

3 Introduction to Network Testing

4 Structured Approach to Troubleshooting

5 Broken cables Disconnected cables Cables connected to the wrong ports Intermittent cable connection Wrong cables used for the task at hand Transceiver problems DCE cable problems DTE cable problems Devices turned off Typical Layer 1 Errors

6 Improperly configured serial interfaces Improperly configured Ethernet interfaces Improper encapsulation set Improper clock rate settings on serial interfaces Network interface card (NIC) problems Typical Layer 2 Errors

7 Routing protocol not enabled Wrong routing protocol enabled Incorrect IP addresses Incorrect subnet masks Typical Layer 3 Errors

8 Layer 1 Problems in a Network

9 Layer 3 Troubleshooting Using Ping

10 Layer 7 Troubleshooting Using Telnet

Download ppt "1 Pertemuan 20 Network Testing. Discussion Topics Introduction to network testing Using a structured approach to troubleshooting Testing by OSI layers."

Similar presentations

 WAN uses Serial ports  Ethernet Ports:  Straight through  Cross over.

 WAN uses Serial ports  Ethernet Ports:  Straight through  Cross over.
The subnet 192.168.32.16/28 has been selected to be further subnetted to support point-to-point serial links. What is the maximum number of serial links.

The subnet /28 has been selected to be further subnetted to support point-to-point serial links. What is the maximum number of serial links.
Ver 1,12/09/2012Kode :CIJ 340,Jaringan Komputer Lanjut FASILKOM Routing Protocols and Concepts – Chapter 2 Static Routing CCNA.

Ver 1,12/09/2012Kode :CIJ 340,Jaringan Komputer Lanjut FASILKOM Routing Protocols and Concepts – Chapter 2 Static Routing CCNA.
Ch. 9 – Basic Router Troubleshooting CCNA 2 version 3.0.

Ch. 9 – Basic Router Troubleshooting CCNA 2 version 3.0.
© 2007 Cisco Systems, Inc. All rights reserved.Cisco Public 1 Version 4.0 Static Routing Routing Protocols and Concepts – Chapter 2.

© 2007 Cisco Systems, Inc. All rights reserved.Cisco Public 1 Version 4.0 Static Routing Routing Protocols and Concepts – Chapter 2.
© 2007 Cisco Systems, Inc. All rights reserved.Cisco Public 1 Version 4.1 Troubleshooting Working at a Small-to-Medium Business or ISP – Chapter 9.

© 2007 Cisco Systems, Inc. All rights reserved.Cisco Public 1 Version 4.1 Troubleshooting Working at a Small-to-Medium Business or ISP – Chapter 9.
Troubleshooting a “Broken LAN” Telecommunications and Networking.

Troubleshooting a “Broken LAN” Telecommunications and Networking.
1 CCNA 2 v3.1 Module 9. 2 Basic Router Troubleshooting CCNA 2, Module 9.

1 CCNA 2 v3.1 Module 9. 2 Basic Router Troubleshooting CCNA 2, Module 9.
WXES2106 Network Technology Semester 1 2004/2005 Chapter 7 TCP/IP Suite Error and Control Messages CCNA2: Module 8, 9.

WXES2106 Network Technology Semester /2005 Chapter 7 TCP/IP Suite Error and Control Messages CCNA2: Module 8, 9.
Networking with Windows Vista.. Vista’s New Tools and Features The Network and Sharing Center Network Discovery Network Map Network Diagnostics.

Networking with Windows Vista.. Vista’s New Tools and Features The Network and Sharing Center Network Discovery Network Map Network Diagnostics.
Overview of simple LANs. Networking basics: LAN TCP/IP is the protocol used in the Internet and dominates the internet and transport layers The subnet.

Overview of simple LANs. Networking basics: LAN TCP/IP is the protocol used in the Internet and dominates the internet and transport layers The subnet.
Static Routing Last Update 2011.05.15 1.3.0 1Copyright 2008-2011 Kenneth M. Chipps Ph.D. www.chipps.com.

Static Routing Last Update Copyright Kenneth M. Chipps Ph.D.
Instructor & Todd Lammle

Instructor & Todd Lammle
CCNA 1 Module1. Objectives Internet Connections Physical – NIC card to connect to local net Logical – Use a standard set of protocols (TCP/IP) Applications.

CCNA 1 Module1. Objectives Internet Connections Physical – NIC card to connect to local net Logical – Use a standard set of protocols (TCP/IP) Applications.
Introduction to networking (Yarnfield) Introduction to routing.

Introduction to networking (Yarnfield) Introduction to routing.
1 16-Aug-15 Static Routing CCNA Exploration Semester 2 Chapter 2.

1 16-Aug-15 Static Routing CCNA Exploration Semester 2 Chapter 2.
Introduction to networking (Yarnfield) Introduction to routing.

Introduction to networking (Yarnfield) Introduction to routing.
Chapter 11 Intro to Routing & Switching.  Upon completion of this chapter, you should be able to:  Configure a router with a basic configuration  Configure.

Chapter 11 Intro to Routing & Switching.  Upon completion of this chapter, you should be able to:  Configure a router with a basic configuration  Configure.
© 2007 Cisco Systems, Inc. All rights reserved.Cisco Public 1 Version 4.0 Static Routing Routing Protocols and Concepts – Chapter 2.

© 2007 Cisco Systems, Inc. All rights reserved.Cisco Public 1 Version 4.0 Static Routing Routing Protocols and Concepts – Chapter 2.
M. Menelaou CCNA2 Module 9. M. Menelaou One of the primary functions of a router is to determine the best path to a given destination. A router learns.

M. Menelaou CCNA2 Module 9. M. Menelaou One of the primary functions of a router is to determine the best path to a given destination. A router learns.

Similar presentations

Ads by Google