1. ENGINEERING REQUIREMENTS OF MATERIAL Fabrication RequirementsService RequirementsEconomics Requirements

2. Factors affecting the selection of engineering materials Properties of Materials Performance Requirements Material’s ReliabilitySafetyPhysical AttributesEnvironments conditionAvailability Disposability and Recyclability Economic Factors

3. 3 Structures of Metals

4. Crystal Structures  Crystalline  Noncrystalline.

5. Materials Crystalline Material Atom or molecules are arranged in a very regular and orderly fashioned in three dimension pattern. Strength of the materials are comparatively high. Examples are metals & alloys. Fig. shows highly ordered arrangement of crystalline solid. Noncrystalline Material Atom or molecules are arranged in irregular manner. They are also known as Amorphous materials. Strength of the materials are lower than crystalline materials. Examples are Glass, Wood, Plastics, Rubbers etc. Fig. Showing disordered arrangement of non crystalline solid.

6. Quartz: crystalline SiO 2 Glass: amorphous SiO 2 Long-range order Only short-range order

7. Space lattices  Atom presents in any crystalline material are arranged in a regular three dimensional repeating pattern. this pattern is known as space lattice or crystal lattice.

8. Space lattices The point of interaction of lines are called lattice point.

9. Unit cell  A unit cell is the smallest geometrical figure the repetition of which in three dimensions will give the actual crystal structure.  A unit cell is a building block of a crystal. the crystal consist of unit cell of stacked tightly together.  Each identical in shape, size and orientation with each other.

10. Unit cell  A unit cell is completely defined by  six lattice parameters.  a, b, c,  As shown in figure.  The lattice parameter of a unit cell are its characteristics intercept ( a, b, c ) and interfacial angles  Unit Cells and Unit Cell Vectors

12. Crystal System  There are seven crystal systems depending upon the lattice parameters of the unit cell.  Each crystal system can be defined in terms of intercepts a, b, c and angles,  between them.  Many of the seven crystal systems have variations of the basic unit cell.  A French crystallographer A.J. Bravais showed that 14 standard unit cells could describe all possible lattice networks.

13. Lattice parameter relationship & Figure showing Unit cell Geometries for the seven crystal systems.

15. Bravais Lattices

16. Crystal structure for metallic elements  Most metals crystallize in relatively simple crystal structures as under.  Simple cubic Structure Example –Polonium  Body centred cubic structure (BCC) Examples –Cr, V, Mo, Mn etc.  Face centred cubic structure (FCC) Examples –Al, Cu, Ni, Au, Ag, Pb etc.  Hexagonal close-packed (HCP or CPH) structure. Examples –Mg, Zn, Co etc..

17. 1.Simple cubic structure (SC)  One atom is located at each of the corners of the cube.  Therefore, it contains eight atoms at the corners which are shared by the adjoining eight cubes.  Hence the share of each cube= 1/8 th of each corner atom  Total no. of atom/unit cell = 1/8 x 8 corners =1 atom

18. Atomic Radius  Considering atoms to be spherical in shape and in contact in a crystal.  Atomic radius can be defined as half the distance between the centers of two neighboring atoms. Atomic Radius of a Simple Cubic Structure:-  In fig. One atom is at each of the corner of the cube.  If ‘a’ is lattice parameter i.e. length of the cube edge and ‘r’ is the atomic radius. Then,  a=2r  r=a 2

19. Atomic Packing Factor:-  The packing of atoms in a unit cell of the crystal structure of a material is known as atomic packing. APF = Volume of atoms in unit cell Volume of unit cell

20. 20 APF for a simple cubic structure =  = 0.52 Atomic Packing Factor of simple cubic structure:- APF = (No. of atoms/unit cell) x (Volume of one atom) Volume of unit cell close-packed directions a R=0.5a contains 8 x 1/8 = 1atom/unit cell

21. 2.Body Centred Cubic structure (BCC)  One atom is located at each of the corners of the cube and one atom at the centre of body.  Therefore, it contains nine atoms. 2 atoms/unit cell: 1 center + 8 corners x 1/8

22. Atomic Radius of a BCC Structure:-  If ‘a’ is lattice parameter i.e. length of the cube edge and ‘r’ is the atomic radius.  From the figure,  AE = AB +BE  = a + a  = 2a  AF = AE +EF  = 2a + a  = 3a  AF = a 3 22 222 2 222 22 2  And also,  AF =R+2R+R =4R  4R = a 3  R = a 3 4

23. APF for a body-centered cubic structure =  3/8 = 0.68 Adapted from Fig. 3.2, Callister 6e. Atomic Packing Factor of BCC structure:-

24. 3.Face Centred Cubic structure (FCC)  One atom is located at each of the corners of the cube and one atom at the centre of each of the six faces of the cube.  The face centred atom is located at the intersection of the diagonal of the face. 4 atoms/unit cell: 6 face x 1/2 + 8 corners x 1/8

25. Atomic Radius of a FCC Structure:-  If ‘a’ is lattice parameter i.e. length of the cube edge and ‘r’ is the atomic radius.  Then considering a triangle,  (4R) = a +a  16R = 2a  R = 222 22 2a/4

26. APF for a body-centered cubic structure =  /( 3  2) = 0.74 Adapted from Fig. 3.1(a), Callister 6e. Atomic Packing Factor of FCC structure:-

27. 3.Hexagonal close packed structure (HCP)  The HCP structure consist of:- 1. One atom at each corner of the hexagon. 2. One atom each at the centers of the two hexagonal faces (basal planes) 3. Three atoms in the form of a triangle midway between the two basal planes.

28. 3.Hexagonal close packed structure (HCP)  The unit cell of the HCP contains:-  12 atoms at the corners x 1/6 =2 atoms.  2 face centred atoms x ½ = 1 atom.  3 middle layer atoms = 3 atoms. Total atom in H.C.P. = 6 atoms.