1. BER-tester for GEB board

2. Main components&restrictions TLK2501 serializer/deserializer/pseudo random generator Genesys FPGA development board Multiplexer which have bandwidth more than 320 MHz 8-bit counter 16 driver chips We can test only one hybrid connector at the time Test line speed 320MHz

3. TLK2501 Can serialize and deserialize at speed of 16 x clock speed. Can also generate PRBS(Pseudo Random Bit Sequency) PRBS is 2^7-1 lenght bit stream

4. How to calculate BER Solution 1 We feed one differential pair at a time with PRBS sequence and its inversion. At the other end of data lines XOR port is used to indicate error bits and feed in to the counter. After PRBS sequence is send we will acquire counter value to FPGA and count BER value. This approach will need multiplexer to split that same test to all line pairs in connector. We probaply also need serializer to convert parallel stream from counter to serial form.

6. How to calculate BER Solution 2 We feed PRBS sequence to every single line at a time and return the signal with coaxial cable to the FPGA where we compare sended signal with the signal from coaxial cable. We will need multiplexer for this approach also. There is possibilty that some data loss is happened in coaxial cable.

8. Problems What are requirements for tester How many lines at the same time we need to test? Do we need to know exact line where problem is? How to display results?

9. Suggestions/Questions