1. I = MAX. 3.2 A No additional power contactor needed ! SizeFWL,FWM,FWVFWBFWD 010.16 A-- 020.21 A0.56 A- 030.27 A0.56 A- 040.39 A0.56 A0.95 A 05-1.10 A- 060.38 A1.10 A1.58 A 07-1.10 A- 080.80 A1.40 A1.97 A 09-1.40 A- 101.12 A1.40 A1.97 A 12--3.21 A 16--5.37 A 18--5.37 A + I = MAX. 10 A !! FWEC max, fanmotor output

2. FWV / FWL / FWM/ FWB /FWD Remote electronic controller: The EPIMSB6 power interface is used for connecting up to 4 units in parallel to 1 controller. The power interface is to be installed on a DIN guide, usually housed in the electric boards cabinet. Remote Electronic controller Up to 4 units EPIMSB6 Power contactor

3. EPIMSB6 Up to three EPIMSB6 can be connected to the FWEC Up to four fancoils (max current < 3,2 A drawn per FCU unit) can be connected to EPIMSB6. So up to twelve units can be controlled by one controller I < 3,2 A SizeFWL,FWM,FWVFWBFWD 010.16 A-- 020.21 A0.56 A- 030.27 A0.56 A- 040.39 A0.56 A0.95 A 05-1.10 A- 060.38 A1.10 A1.58 A 07-1.10 A- 080.80 A1.40 A1.97 A 09-1.40 A- 101.12 A1.40 A1.97 A 12--3.21 A 16--5.37 A 18--5.37 A

4. EPIB6 When current drawn by FCU > 3,2 A an EPIB6 needs to be used. Only one FCU can be connected on an EPIB6 I > 3,2A SizeFWL,FWM,FWVFWBFWD 010.16 A-- 020.21 A0.56 A- 030.27 A0.56 A- 040.39 A0.56 A0.95 A 05-1.10 A- 060.38 A1.10 A1.58 A 07-1.10 A- 080.80 A1.40 A1.97 A 09-1.40 A- 101.12 A1.40 A1.97 A 12--3.21 A 16--5.37 A 18--5.37 A

5. EPIMSB6&EPIB6 EPIMSB6 Solution when multiple fancoils with current > 3.2A needs to be connected to same control I > 3.2A EPIB6 I > 3.2A