Presentation is loading. Please wait.

Presentation is loading. Please wait.

BOILER MOUNTINGS & ACCESSORIES

Similar presentations


Presentation on theme: "BOILER MOUNTINGS & ACCESSORIES"— Presentation transcript:

1 BOILER MOUNTINGS & ACCESSORIES

2 Fitting and devices which are necessary for the safety and control are knows as boiler mountings

3

4 PRESSURE GAUGE • A pressure gauge is an instrument by means of which the pressure exerted inside a vessel can be measured. • There are two types of pressure gauges, one is Bourdon tube pressure gauge and the other is diaphragm type gauge. MAEC. MECHANICAL

5

6

7

8 FUSIBLE PLUG Function: To extinguish fire in the event of water level in the boiler shell falling belowa certain specified limit.It protects fire tubes from burning when the level of the water in the water shell falls abnormally low and the fire tube or crown plate which is normally submerged in the water, gets exposed to steam space which may not be able to keep it coo

9 FEED CHECK VALVE I ) To allow the feed water to pass into the boiler.
ii) To prevent the back flow of water from the boiler in the event of the failure of the feed pump.

10 Feed water heater Boiler feed pump Steam separator
Fitting or devices which are provided to increase the efficiency of the boiler and help in the smooth working of the plant are knows as boiler accessories.

11

12 Air Preheater • Used to recover heat from the exhaust flue gases • Installed in between the economizer and chimney. • Temperature of the required air for combustion is passed through the air preheater where its temperature is raised. • Then hot air passed to the furnace. ADVANTAGES • Gives higher furnace temperature which results more heat transfer thus increase evaporative capacity • Approximately boiler efficiency increases about 2% for each 30-35oC rise in air temperature.

13

14 FEED WATER HEATER Function : Feed water heater is a plant in which the feed water is heated before it enters into a boiler, the heat being taken from the exhaust steam of steam engine Cylinders or of steam turbines.

15 BOILER FEED PUMP Function : The pump is used to deliver feed water into a boiler against boiler steam pressure.

16 STEAM SEPARATOR Function : The steam separator is fitted before the steam engine or steam turbine to separate water particles from steam.

17


Download ppt "BOILER MOUNTINGS & ACCESSORIES"

Similar presentations


Ads by Google