1. Extended Use from 22 to 120 pounds. The Evenflo® Transitions® 3 in 1 Combination Seat features an innovative design allowing you to transition the seat between 3 different modes of use. This seat can be used as a harness booster, high back booster, & a no back booster. Sporty style elements appeal to children, as will the integrated cup holders. The seat accommodates children ranging from 22-120 lbs. This combination seat provides an exceptional value for a seat with such a wide support range combined with an array of innovative features. Protecting children is our core mission at Evenflo. For almost a century we have been a leader in safety, innovation and education. Knowing that one in four automobile accidents are side impact collisions, we go beyond the current government standards when designing the next generation of Evenflo car seats, including the Transitions 3 in 1. 5-Point Harness 22 - 65 lbs 10,0-29,4 kg Vehicle Belts 40 - 120 lbs 18,0-54,4 kg Evenflo Transitions 3 in 1 Combination Seat, Legacy Consumer Benefits Extended Use – 3 modes of use – Harness Booster, High Back Booster, & No Back Booster 65 lbs. Internal Harness Weight Rating keeps your child in a 5 point harness longer Superior e3 Plus Side Impact™ Protection significantly reduces the forces in side impact crashes through advanced energy absorption and an expanded zone of protection. 120 lbs. booster mode weight rating accommodates growing children longer Dual cup holders for convenience Simple adjustability with upfront harness fitting and 2 crotch buckle positions Machine-washable car seat pad keeps the seat looking clean Side Impact Tested! Meets or exceeds all applicable Federal Safety Standards AND Evenflo’s Side Impact Test Standard Designed and tested for structural integrity at energy levels approximately 2X the federal crash test standard Energy absorbing foam liner provides added safety & comfort Equipped for lower anchor and tether systems Safety Testing Side Impact Tested! Meets or exceeds all applicable federal safety standards and Evenflo’s side impact standards. Designed and tested for structural integrity at energy levels approximately 2X the federal crash test standard. FMVSS 213: Federal Motor Vehicle Safety Standards for Child Restraint Systems FMVSS 302: Federal Motor Vehicle Safety Standards for Flammability of Interior Materials Certified For Use In Aircraft: ONLY when used with the 5-point harness this restraint meets FAA Inversion requirements for airplane use. For 5-Point Harness Use Weight: 22 - 65 lbs (10 – 29,4 kg) Height: 28 - 50 inches (71 - 127 cm) AND the tops of their ears are below the top of the child restraint headrest. Age: At least one year of age For Booster Use Weight: 40 - 120 lbs (18 – 54,4 kg) Height: 44 - 57 inches (112 - 145 cm) AND the tops of their ears are below the top of the child restraint headrest. Age: At least four years of age Private and Confidential © 2015 Evenflo Company Inc | 1-800-837-9201 | 225 Byers Road, Miamisburg, Ohio 45342 Child Specifications

2. Use & Care Carefully read all instructions and warnings on the product, product labels, and instruction manuals before use. Consult your vehicle owner’s manual to determine proper placement of child restraint in your vehicle and familiarize yourself with your vehicle’s components. Cleaning Instructions Plastic and metal parts may be wiped clean with mild soap and water and dried with a soft cloth. Do not use abrasive cleaners or solvents. Take care not to damage any labels. The harness can be wiped clean with mild soap and water. Allow harness to air dry. DO NOT immerse buckle in water or lubricate buckle. Machine wash the seat pad separately in cold water, delicate cycle, and tumble dry 10 – 15 minutes on low heat. Private and Confidential © 2015 Evenflo Company Inc | 1-800-837-9201 | 225 Byers Road, Miamisburg, Ohio 45342 Retailer Specifications Product Specifications Product Weight: 20 lbs. (9.072 kg.) Assembled Product Dimensions: 19.5” W x 20.75” D x 27.75” H Model Number: 34411029 UPC Number: 0-32884-18968-7 Packaging: 1 per Carton FOB: Piqua, OH Pattern: Legacy Ti/HI: 4/2 Transitions ® 3 in 1 Combination Seat, Legacy Carton Dimensions (inches): 20” W x 20” D x 29” H Carton Dimensions (cm): 50.8 W x 50.8 D x 73.66 H cm Assembled Product Dimensions (inches): 19.5” W x 20.75” D x 27.75” H Assembled Product Dimensions (cm): 49.53 W x 52.705 D x 70.548 H cm Product Weight: 20 lbs. (9.072 kg.) Shipping Weight: 24 lbs. (10.88 kg.)