1. Fuel Cells

2. What is a Fuel Cell? Quite simply, a fuel cell is a device that converts chemical energy into electrical energy, water, and heat through electrochemical reactions.  Fuel and air react when they come into contact through a porous membrane (electrolyte) which separates them.  This reaction results in a transfer of electrons and ions across the electrolyte from the anode to the cathode.  If an external load is attached to this arrangement, a complete circuit is formed and a voltage is generated from the flow of electrical current. The voltage generated by a single cell is typically rather small (< 1 volt), so many cells are connected in series to create a useful voltage.

3. Galvanic cell (battery) Hydrogen fuel cell  Open system  Anode and cathode are gases in contact with a platinum catalyst.  Reactants are externally supplied, no recharging required.  Closed system  Anode and cathode are metals.  Reactants are internally consumed, need periodic recharging. Fuel Cell Vs. Battery Basic operating principles of both are very similar, but there are several intrinsic differences.

4. Fuel Cell Vs. Internal Combustion Engine Fuel cell:  Output is electrical work.  Fuel and oxidant react electrochemically.  Little to no pollution produced. I.C. Engine:  Output is mechanical work.  Fuel and oxidant react combustively.  Use of fossil fuels can produce significant pollution. Differences: Similarities:  Both use hydrogen-rich fuel.  Both use compressed air as the oxidant.  Both require cooling.

5. Some History… Fuel cell principle first discovered by William Grove in 1839. Grove used four large cells, each containing hydrogen and oxygen, to produce electric power which was then used to split the water in the smaller upper cell. Commercial potential first demonstrated by NASA in the 1960’s with the usage of fuel cells on the Gemini and Apollo space flights. However, these fuel cells were very expensive. Fuel cell research and development has been actively taking place since the 1970’s, resulting in many commercial applications ranging from low cost portable systems for cell phones and laptops to large power systems for buildings.

6. Fuel Cells in Use: Stationary Systems

7. Fuel cell system for submarine

8. Fuel Cells in Use: Transportation Systems XCELLSiS fuel cell bus prototypes Buses are most commercially advanced applications of fuel cells to date. Are currently being used by many American and European cities.

9. Fuel Cells in Use: Transportation Systems Many of the major car companies are developing fuel cell car prototypes which should come to market during the next decade. The cars use either pure hydrogen or methanol with an on board reformer.

10. Fuel Cells in Use: Hydrogen Fuel Cell System

11. Fuel Cells in Use: Space Systems 1.5 kW Apollo fuel cell Apollo used two of these units. 12 kW Space shuttle fuel cell Weight: 120 kg Size: 36x38x114 cm Contains 32 cells in series

12. Fuel Cells in Use: Portable Systems A laptop using a fuel cell power source can operate for up to 20 hours on a single charge of fuel (Courtesy: Ballard Power Systems)

13. Glossary of Terms Used in Describing Fuel Cell Technology Electrochemical reaction: A reaction involving the transfer of electrons from one chemical substance to another. Electrode: An electrical terminal that conducts an electric current into or out of a fuel cell (where the electrochemical reaction occurs). Anode: Electrode where oxidation reaction happens (electrons are released). Cathode: Electrode where reduction reaction occurs (electrons are acquired). In a fuel cell, hydrogen is oxidized at the anode and oxygen reduction occurs at the cathode. Electrolyte: A chemical compound that conducts ions from one electrode to the other. Ion: An atom that carries a positive or negative charge due to the loss or gain of an electron. Anion is a negative ion, cation is a positive ion. An electrochemical cell consists of 2 electrodes + 1 electrolyte

14. Terminology (cont.) Catalyst: A substance that participates in a reaction, increasing its rate, but is not consumed in the reaction. Polymer: A natural or synthetic compound made of giant molecules which are composed of repeated links of simple molecules (monomers). Inverter: A device used to convert direct current electricity produced by a fuel cell to alternating current. Reformer: A device that extracts pure hydrogen from hydrocarbons. Stack: Individual fuel cells connected in series within a generating assembly.