1. Lecture 18 Chapter 32 Outline Gauss Law for Mag Field Maxwell extension of Ampere’s Law Displacement Current Spin/ Orbital Mag Dipole Moment Magnetic Properties of Material.

12. Faraday’s Law of Magnetic Induction When a material is placed within a magnetic field, the magnetic forces of the material's electrons will be affected. This effect is known as Faraday's Law of Magnetic Induction. However, materials can react quite differently to the presence of an external magnetic field. This reaction is dependent on a number of factors, such as –the atomic and molecular structure of the material, and –the net magnetic field associated with the atoms.

13. The magnetic moments associated with atoms have three origins. These are –the electron motion, –the change in motion caused by an external magnetic field, and –the spin of the electrons. In most atoms, electrons occur in pairs. Electrons in a pair spin in opposite directions. So, when electrons are paired together, their opposite spins cause their magnetic fields to cancel each other. Therefore, no net magnetic field exists. Alternately, materials with some unpaired electrons will have a net magnetic field and will react more to an external field. Most materials can be classified as diamagnetic, paramagnetic or ferromagnetic.

14. Diamagnetic materials –do not exhibit magnetism until they are placed in an external magnetic field. –They then develop a magnetic dipole moment directed opposite. – If the field is non-uniform, the diamagnetic material is repelled from regions of greater magnetic field. This property is called diamagnetism. Diamagnetic materials –do not exhibit magnetism until they are placed in an external magnetic field. –They then develop a magnetic dipole moment directed opposite. – If the field is non-uniform, the diamagnetic material is repelled from regions of greater magnetic field. This property is called diamagnetism.

15. Paramagnetic materials Each atom has a permanent magnetic dipole moment, but the dipole-moments are randomly oriented and the material as a whole lacks a magnetic field. However, an external magnetic field B can partially align the atomic dipole moments to give the material a net magnetic dipole moment in the direction of B. If B, is non-uniform, the material is attracted to regions of greater magnetic field. These properties are called paramagnetism. The alignment of the atomic dipole moments increases with an increase in B, and decreases with an increase in temperature Each atom has a permanent magnetic dipole moment, but the dipole-moments are randomly oriented and the material as a whole lacks a magnetic field. However, an external magnetic field B can partially align the atomic dipole moments to give the material a net magnetic dipole moment in the direction of B. If B, is non-uniform, the material is attracted to regions of greater magnetic field. These properties are called paramagnetism. The alignment of the atomic dipole moments increases with an increase in B, and decreases with an increase in temperature

16. Ferromagnetic materials In the absence of an external magnetic field, some of the electrons in a ferromagnetic material have their magnetic dipole moments aligned by means of a quantum physical interaction called exchange coupling, producing regions (domains) within the material with strong magnetic dipole moments. B can align the magnetic dipole moments of those regions, producing a strong net magnetic dipole moment for the material as a whole, in the direction of B. This net magnetic dipole moment can partially persist when B is removed. If B is nonuniform, the ferromagnetic material is attracted to regions of greater magnetic field. These properties are called ferromagnetism. Exchange coupling disappears when a sample's temperature exceeds its Curie temperature.

17. Electromagnet Tape Recorder Transformer

18. Earth's magnetic field The Earth's magnetic field is similar to that of a bar magnet tilted 11 degrees from the spin axis of the Earth. Magnetic fields surround electric currents, so we surmise that circulating electric currents in the Earth's molten metallic core are the origin of the magnetic field. A current loop gives a field similar to that of the earth. The magnetic field magnitude measured at the surface of the Earth is about half a Gauss and dips toward the Earth in the northern hemisphere. The magnitude varies over the surface of the Earth in the range 0.3 to 0.6 Gauss.

19. The Hysteresis Loop and Magnetic Properties A great deal of information can be learned about the magnetic properties of a material by studying its hysteresis loop. A hysteresis loop shows the relationship between the induced magnetic flux density (B) and the magnetizing force (H). It is often referred to as the B-H loop. An example hysteresis loop is shown below.

20. The loop is generated by measuring the magnetic flux of a ferromagnetic material while the magnetizing force is changed. A ferromagnetic material that has never been previously magnetized or has been thoroughly demagnetized will follow the dashed line as H is increased. As the line demonstrates, the greater the amount of current applied (H+), the stronger the magnetic field in the component (B+). At point "a" almost all of the magnetic domains are aligned and an additional increase in the magnetizing force will produce very little increase in magnetic flux. The material has reached the point of magnetic saturation.

21. When His reduced to zero, the curve will move from point "a" to point "b." At this point, it can be seen that some magnetic flux remains in the material even though the magnetizing force is zero. This is referred to as the point of retentivity on the graph and indicates the remanence or level of residual magnetism in the material. As the magnetizing force is reversed, the curve moves to point "c", where the flux has been reduced to zero. This is called the point of coercivity on the curve. The force required to remove the residual magnetism from the material is called the coercive force or coercivity of the material.

22. As the magnetizing force is increased in the negative direction, the material will again become magnetically saturated but in the opposite direction (point "d"). Reducing H to zero brings the curve to point "e." It will have a level of residual magnetism equal to that achieved in the other direction. Increasing H back in the positive direction will return B to zero. Notice that the curve did not return to the origin of the graph because some force is required to remove the residual magnetism. The curve will take a different path from point "f" back to the saturation point where it with complete the loop

23. From the hysteresis loop, a number of primary magnetic properties of a material can be determined. Retentivity - A measure of the residual flux density corresponding to the saturation induction of a magnetic material. In other words, it is a material's ability to retain a certain amount of residual magnetic field when the magnetizing force is removed after achieving saturation. Residual Magnetism or Residual Flux - the magnetic flux density that remains in a material when the magnetizing force is zero.

26. Permeability

27. It is clear that this equation describes the slope of the curve at any point on the hysteresis loop. The permeability value given in papers and reference materials is usually the maximum permeability or the maximum relative permeability. The maximum permeability is the point where the slope of the B/H curve for the unmagnetized material is the greatest. This point is often taken as the point where a straight line from the origin is tangent to the B/H curve.

29. The shape of the hysteresis loop tells a great deal about the material being magnetized. The hysteresis curves of two different materials are shown in the graph. Relative to other materials, a material with a wider hysteresis loop has: Lower Permeability Higher Retentivity Higher Coercivity Higher Reluctance Higher Residual Magnetism