Presentation is loading. Please wait.

Presentation is loading. Please wait.

Raymond A. Serway Chris Vuille Chapter Six Momentum and Collisions.

Similar presentations


Presentation on theme: "Raymond A. Serway Chris Vuille Chapter Six Momentum and Collisions."— Presentation transcript:

1 Raymond A. Serway Chris Vuille Chapter Six Momentum and Collisions

2 Collisions Conservation of momentum allows complex collision problems to be solved without knowing about the forces involved Information about the average force can be derived Introduction

3 Momentum The linear momentum of an object of mass m moving with a velocity is defined as the product of the mass and the velocity – – SI Units are kg m / s – Vector quantity, the direction of the momentum is the same as the velocity’s Section 6.1

4 More About Momentum Momentum components – p x = m v x and p y = m v y Applies to two-dimensional motion Momentum is related to kinetic energy – Section 6.1

5 Impulse In order to change the momentum of an object, a force must be applied The time rate of change of momentum of an object is equal to the net force acting on it – – Gives an alternative statement of Newton’s second law – Also valid when the forces are not constant Section 6.1

6 Impulse cont. When a single, constant force acts on the object, there is an impulse delivered to the object – – is defined as the impulse – Vector quantity, the direction is the same as the direction of the force – SI unit of impulse: kg. m / s Section 6.1

7 Impulse-Momentum Theorem The theorem states that the impulse acting on the object is equal to the change in momentum of the object – – If the force is not constant, use the average force applied Section 6.1

8 Average Force in Impulse The average force can be thought of as the constant force that would give the same impulse to the object in the time interval as the actual time-varying force gives in the interval Section 6.1

9 Average Force cont. The impulse imparted by a force during the time interval Δt is equal to the area under the force-time graph from the beginning to the end of the time interval Or, the impulse is equal to the average force multiplied by the time interval, Section 6.1

10 Impulse Applied to Auto Collisions The most important factor is the collision time, or the time it takes the person to come to a rest – Increasing this time will reduce the chance of dying in a car crash Ways to increase the time – Seat belts – Air bags Section 6.1

11 Typical Collision Values For a 75 kg person traveling at 27 m/s (60.0 mph) and coming to stop in 0.010 s F = -2.0 x 10 5 N a = 280 g Almost certainly fatal Section 6.1

12 Seat Belts Seat belts – Restrain people so it takes more time for them to stop – New time is about 0.15 seconds – New force is about 9.8 kN – About one order of magnitude below the values for an unprotected collision Section 6.1

13 Air Bags The air bag increases the time of the collision It will also absorb some of the energy from the body It will spread out the area of contact – Decreases the pressure – Helps prevent penetration wounds Section 6.1

14 Conservation of Momentum Momentum in an isolated system in which a collision occurs is conserved – A collision may be the result of physical contact between two objects – “Contact” may also arise from the electrostatic interactions of the electrons in the surface atoms of the bodies – An isolated system will have not external forces Section 6.2

15 Conservation of Momentum, cont The principle of conservation of momentum states when no external forces act on a system consisting of two objects that collide with each other, the total momentum of the system remains constant in time – Specifically, the total momentum before the collision will equal the total momentum after the collision Section 6.2

16 Conservation of Momentum, Example The momentum of each object will change The total momentum of the system remains constant Section 6.2

17 Forces in a Collision The force with which object 1 acts on object 2 is equal and opposite to the force with which object 2 acts on object 1 Impulses are also equal and opposite Section 6.2

18 Conservation of Momentum, cont. Mathematically: – Momentum is conserved for the system of objects – The system includes all the objects interacting with each other – Assumes only internal forces are acting during the collision – Can be generalized to any number of objects Section 6.2

19 Types of Collisions Momentum is conserved in any collision Inelastic collisions – Kinetic energy is not conserved Some of the kinetic energy is converted into other types of energy such as heat, sound, work to permanently deform an object – Perfectly inelastic collisions occur when the objects stick together Not all of the KE is necessarily lost Section 6.3

20 More Types of Collisions Elastic collision – Both momentum and kinetic energy are conserved Actual collisions – Most collisions fall between elastic and perfectly inelastic collisions Section 6.3

21 Perfectly Inelastic Collisions When two objects stick together after the collision, they have undergone a perfectly inelastic collision Conservation of momentum becomes Section 6.3

22 Some General Notes About Collisions Momentum is a vector quantity – Direction is important – Be sure to have the correct signs Section 6.3

23 More About Elastic Collisions Both momentum and kinetic energy are conserved Typically have two unknowns Solve the equations simultaneously Section 6.3

24 Elastic Collisions, cont. A simpler equation can be used in place of the KE equation Section 6.3

25 Summary of Types of Collisions In an elastic collision, both momentum and kinetic energy are conserved In an inelastic collision, momentum is conserved but kinetic energy is not In a perfectly inelastic collision, momentum is conserved, kinetic energy is not, and the two objects stick together after the collision, so their final velocities are the same Section 6.3

26 Problem Solving for One -Dimensional Collisions Coordinates: Set up a coordinate axis and define the velocities with respect to this axis – It is convenient to make your axis coincide with one of the initial velocities Diagram: In your sketch, draw all the velocity vectors and label the velocities and the masses Section 6.3

27 Problem Solving for One -Dimensional Collisions, 2 Conservation of Momentum: Write a general expression for the total momentum of the system before and after the collision – Equate the two total momentum expressions – Fill in the known values Section 6.3

28 Problem Solving for One -Dimensional Collisions, 3 Conservation of Energy: If the collision is elastic, write a second equation for conservation of KE, or the alternative equation – This only applies to perfectly elastic collisions Solve: the resulting equations simultaneously Section 6.3

29 Sketches for Collision Problems Draw “before” and “after” sketches Label each object – Include the direction of velocity – Keep track of subscripts Section 6.3

30 Sketches for Perfectly Inelastic Collisions The objects stick together Include all the velocity directions The “after” collision combines the masses Both move with the same velocity Section 6.3

31 Glancing Collisions For a general collision of two objects in three- dimensional space, the conservation of momentum principle implies that the total momentum of the system in each direction is conserved – – Use subscripts for identifying the object, initial and final velocities, and components Section 6.4

32 Glancing Collisions – Example The “after” velocities have x and y components Momentum is conserved in the x direction and in the y direction Apply conservation of momentum separately to each direction Section 6.4

33 Problem Solving for Two-Dimensional Collisions Coordinates: Set up both coordinate axes and define your velocities with respect to these axes – It is convenient to choose the x- or y- axis to coincide with one of the initial velocities Diagram: In your sketch, draw and label all the velocities and masses Section 6.4

34 Problem Solving for Two-Dimensional Collisions, 2 Conservation of Momentum: Write expressions for the x and y components of the momentum of each object before and after the collision – Write expressions for the total momentum before and after the collision in the x-direction and in the y-direction Section 6.4

35 Problem Solving for Two-Dimensional Collisions, 3 Conservation of Energy: If the collision is perfectly elastic, write an expression for the total energy before and after the collision – Equate the two expressions – Fill in the known values – Solve the quadratic equations Can’t be simplified – Remember to skip this step if the collision is not perfectly elastic Section 6.4

36 Problem Solving for Two-Dimensional Collisions, 4 Solve for the unknown quantities – Solve the equations simultaneously – There will be two equations for inelastic collisions – There will be three equations for elastic collisions Section 6.4

37 Rocket Propulsion The operation of a rocket depends on the law of conservation of momentum as applied to a system, where the system is the rocket plus its ejected fuel – This is different than propulsion on the earth where two objects exert forces on each other Road on car Train on track Section 6.5

38 Rocket Propulsion, 2 The rocket is accelerated as a result of the thrust of the exhaust gases This represents the inverse of an inelastic collision – Momentum is conserved – Kinetic Energy is increased (at the expense of the stored energy of the rocket fuel) Section 6.5

39 The initial mass of the rocket is M + Δm – M is the mass of the rocket –  m is the mass of the fuel about to be burned The initial velocity of the rocket is Section 6.5 Rocket Propulsion, 3

40 Rocket Propulsion The rocket’s mass is M The mass of the fuel, Δm, has been ejected The rocket’s speed has increased to Section 6.5

41 Rocket Propulsion, final The basic equation for rocket propulsion is: – M i is the initial mass of the rocket plus fuel – M f is the final mass of the rocket plus any remaining fuel – The speed of the rocket is proportional to the exhaust speed – For best results, the exhaust speed should be as high as possible – Typical exhaust speeds are several kilometers per second Section 6.5

42 Thrust of a Rocket The thrust is the force exerted on the rocket by the ejected exhaust gases The instantaneous thrust is given by – The thrust increases as the exhaust speed increases and as the burn rate (ΔM/Δt) increases Section 6.5


Download ppt "Raymond A. Serway Chris Vuille Chapter Six Momentum and Collisions."

Similar presentations


Ads by Google