1. Arts & Crafts Table Table size: 10’ long x 33” wide x 36” tall Table top built using 8.5” wide x 10’ long 15/16” thick Black Walnut planks. Planks will be supplied by Brady Schroeder. Planks are 8.5” wide with a joined edge, ~10’-2” long, 15/16” thick and were run through a planer once. They may need to be run through a planer again to minimize sanding… Table top thickness should be doubled (two planks glued together) around perimeter to make it look ~2.0” thick Edge Profile: Standard Roman Ogee on top and 1/8″ roundover on vertical corners Table skirt and legs are to be painted. Color TBD Table legs should be similar to the drawing below

2. Arts & Crafts Table Examples I believe the finished Arts & Crafts table top will look similar to this Countertop Edge Profile: Standard Roman Ogee on top and 1/8″ roundover on vertical corners I would like to have ‘large’ legs similar to these. Both the legs and the skirt will be painted.

3. Arts & Crafts Table Top Finish Options Option 1: Option 2: Commercial Grade Liquid Glass http://www.liquidglasscoating.com/ Option 2: Commercial Grade Liquid Glass

4. Bar top Bar size: see drawing below Bar top built using same wood planks as table top Countertop Edge Profile: Standard Roman Ogee on top and 1/8″ roundover on vertical corners

5. Counter top Counter top size: 45.5” wide x Standard depth. No backsplash Counter top built using same wood planks as table top Counter top thickness should be doubled (two planks glued together) on front edge only (45.5” side) perimeter to make it look ~2.0” thick Counter top front edge Profile (front edge only: Standard Roman Ogee on top and 1/8″ roundover on vertical corners

6. Bar Counter & Cabinet Counter Top Finish Options Option 1: Option 2: Tung Oil or similar