1. 03.02.20161 Dr. Andrey Ponomarev STC of Applied Nanotechnology Inc. St. Petersburg, Russia EpoxyPAN Technology

2. Main parameters of EpoxyPAN Pressure strength, more then, Mpa ……....140 Adhesion, more then, Mpa …………..…...5,5 Density, less then, g/cm 3 ………………..…1,7 Color (by color additive)……………….anyone Water absorption, no more,%....................0,3 Damp-proof, no less, W (Mpa)……………..20 Lifetime ( 2,5 pH media), no less, years…..30 Frost resistance, cycles, no less………..F500 Thermostability, no less, grad.C………….160

3. EpoxyPAN coating technology Coating the any surface by EpoxyPAN is a very simple technology and it include two stages: A. Deal the adhesive and primers B. Deal the main composite coating Usual paint sprayer Texture sprayer LC-02 (B-002B)

4. EpoxyPAN on the plaster and on the GMS EpoxyPAN on the Plaster EpoxyPAN on the glass-magnesium sheets

5. EpoxyPAN on the FPU EpoxyPAN on the heat insulator foam, as vandalproof & waterproof coating

6. EpoxyPAN on the Concrete & Metal surfaces EpoxyPAN coating on the concrete & melall surfaces provide high value of corrosion protection of substrates Concrete Tunnel Steel samples Brick, protected by EpoxyPAN

7. EpoxyPAN on the Piers of the Dam 03.02.20167

8. A new possibility of EpoxyPAN application – a noise damping As it was founded, EpoxyPAN coating 0,4 mm thick on the GMS is possible to damp a noise more 2-3 Db in a wide spectra range (100- 3500 Hz) The light composite sheet, containing EpoxyPAN for effective noise protecting ( more, then 25 Db)

9. Cost and feasibility EpoxyPAN coating has all necessary certification in CIS; The experience of real use in the coating of bridges, tunnels in the underground and palaces; Price – over 17$ per square meter (thickness 0,8 - 1 mm). 9