Presentation is loading. Please wait.

Presentation is loading. Please wait.

1 MODELING MATTER AT NANOSCALES 6. The theory of molecular orbitals for the description of nanosystems (part II) 6.06. Perturbational methods for dealing.

Similar presentations


Presentation on theme: "1 MODELING MATTER AT NANOSCALES 6. The theory of molecular orbitals for the description of nanosystems (part II) 6.06. Perturbational methods for dealing."— Presentation transcript:

1 1 MODELING MATTER AT NANOSCALES 6. The theory of molecular orbitals for the description of nanosystems (part II) 6.06. Perturbational methods for dealing with correlation energy

2 Perturbed multielectronic Hartree - Fock wave function Multielectronic reference functions are antisymmetrized products or Slater determinants resulting from a Hartree – Fock calculation, a typical electronic configuration is that where each spin orbital represents a given existing electron. where  i reference functions are spin orbitals describing the state of an electron of r n  n ≡  n spatial and spin coordinates.

3 Perturbed multielectronic Hartree - Fock wave function The Hartree – Fock equation for eigenvalues and eigenvectors for a given I state taken as reference would be: where the Fockian acts on the supposed unperturbed eigenfunction  I and gives an E I eigenvalue corresponding to a certain I pure Hartree – Fock state (either ground or excited) as a reference.

4 Perturbed multielectronic Hartree - Fock wave function On the other hand, the “exact” quantum expression can be written as: where the  L eigenfunction is referred to a certain L state of the system at the E L energy. Ĥ is the quantum time independent Hamiltonian.

5 Perturbed multielectronic Hartree - Fock wave function A certain operator can be defined to express the difference between the exact and the Fockian operators:

6 Perturbed multielectronic Hartree - Fock wave function A certain operator can be defined to express the difference between the exact and the Fockian operators: Such difference would mean small values with respect to the total energy of the system. We treat it as the electron correlation energy, by definition.

7 Perturbed multielectronic Hartree - Fock wave function A certain operator can be defined to express the difference between the exact and the Fockian operators: Such difference would mean small values with respect to the total energy of the system. We treat it as the electron correlation energy, by definition. It allows to treat correlation energy as a perturbation following the so called Rayleigh – Schrödinger (RS) theory.

8 Perturbed multielectronic Hartree - Fock wave function Then, in these conditions: As the Hartree – Fock solution was: It can be considered that the Hartree – Fock system’s wave function and the corresponding eigenvalue are reasonably near to the corresponding  L exact wave function and E L eigenvalue, respectively.

9 Perturbed multielectronic Hartree - Fock wave function The perturbations theory routine here consists in designing a procedure to systematically improve Fockian’s eigenfunctions and eigenvalues to approach the exact Hamiltonian’s eigenfunctions and eigenvalues.

10 Rayleigh – Schrödinger perturbation method In the general case of Rayleigh – Schrödinger perturbation method a variable ordering parameter is introduced as:

11 Rayleigh – Schrödinger perturbation method In the general case of Rayleigh – Schrödinger perturbation method a variable ordering parameter is introduced as: It is related with the “intensity” of perturbations, taken as the value of electron correlation.

12 Rayleigh – Schrödinger perturbation method In the general case of Rayleigh – Schrödinger perturbation method a variable ordering parameter is introduced as: It is related with the “intensity” of perturbations, taken as the value of electron correlation. It can eventually become unitary depending on the way to build the perturbation operator.

13 Rayleigh – Schrödinger perturbation method Developing a Taylor series on to express the wave function and exact energy of the system in terms of the Hartree – Fock’ s solutions: Where and are the functions and energies of the n order perturbation, respectively, in the I state.

14 Rayleigh – Schrödinger perturbation method Developing a Taylor series on to express the wave function and exact energy of the system in terms of the Hartree – Fock’ s solutions: Where and are the functions and energies of the n order perturbation, respectively, in the I state. Observe that 0 ≡ 1 for the 0 th order.

15 Rayleigh – Schrödinger perturbation method The problem to solve is finding expressions to calculate the perturbation to the 0 th order Hartree – Fock’s wave function and energy: as they can be considered originated by electron correlation.

16 Rayleigh – Schrödinger perturbation method The problem to solve is finding expressions to calculate the perturbation to the 0 th order Hartree – Fock’s wave function and energy: It can be achieved from the matrix elements of the perturbation operator among multielectronic reference functions, or 0 th order, in different I and J states that can be calculated according to: as they can be considered originated by electron correlation.

17 Term deduction and evaluation Considering that reference multielectronic HF wave functions of any I state are orthonormalized, we can establish that the 0 th order wave function is normal with respect to a certain L state of the exact function to be represented:

18 Term deduction and evaluation Considering that reference multielectronic HF wave functions of any I state are orthonormalized, we can establish that the 0 th order wave function is normal with respect to a certain L state of the exact function to be represented: This forces all values to vanish and means that the 0 ths order I reference state cannot be mixed, or is orthogonal, to perturbed wave functions of higher order of the same state: for n = 1, 2, 3,… Higher order perturbed states cannot be mixed with the unperturbed.

19 Term deduction and evaluation Departing from the exact L state already defined by  L : remains: by substituting in:

20 Term deduction and evaluation By collecting all terms with the same powers of, evaluated as unitary, equations corresponding to each perturbation order arise: and their solution will allow finding all perturbational wave functions as

21 Term deduction and evaluation If each of those equations are multiplied by the 0 th order reference function and considering that : the energies for each perturbation order giving the energies for each perturbation order of each of the previously found functions. … Observe, for example, that the first order perturbed wave function is leading to second order perturbation energy.

22 Term deduction and evaluation If we reorder the 1 st order energy equation above: remains a case of an integro – differential equation in place of the eigenfunction and eigenvalue problem, and it requires the appropriate solution. and substitute the value of by the previous perturbational matrix element:

23 Term deduction and evaluation Searching for terms to develop perturbed wave functions we can develop the solution for the first order perturbation in terms of other states (or Slater determinants) being them also eigenfunctions of the Fockian:

24 Term deduction and evaluation Projecting any other 0 th order J  I state onto this 1 st order perturbed wave function arises the following : As perturbational wave functions are also orthonormal with respect to the 0 th order: as all HF solutions are orthonormal. then the first order of the I th state can be developed in terms of other Hartree – Fock’s J states:

25 Term deduction and evaluation In this condition, after multiplying all previous equations by, projecting them onto all space, and knowing that all 0 th order functions are orthonormal: The projection of the 0 th order wave function of any J state onto that of the first order perturbation of any different I state depends on their of 0 th order wave functions perturbation matrix element as small was the difference between their expected energy values.

26 Term deduction and evaluation As: gives the second order expression as: then: where substituting by:

27 Term deduction and evaluation Proceeding in a similar way, the third order perturbation energy expression is: Higher order terms can also be obtained.

28 Møller – Plesset method being = 1. The total energy after perturbation corrections remains as: The matter is to see how each perturbation term can be obtained from the output of a Hartree – Fock calculation and how important are each correction (perturbation order) on the E I correlated total energy.

29 Møller – Plesset method The Moller – Plesset (MP) method is the application of the previously detailed Rayleigh – Schrödinger (RS) perturbation theory to Hamiltonians as that of Hartee – Fock. Then: where the Fockian is considered as the 0 th order solution of the Hamiltonian.

30 Møller – Plesset method The energy operator for the whole multielectronic system can be expressed as a sum of monoelectronic terms, i.e. a non interacting Fockian. Then, for a 2N electron system:

31 Møller – Plesset method Slater determinants as obtained from spin orbitals of a HF solution are the 0 th order wave functions where monoelectronic operators apply to. The energy operator for the whole multielectronic system can be expressed as a sum of monoelectronic terms, i.e. a non interacting Fockian. Then, for a 2N electron system:

32 Møller – Plesset method where double sums of two electron integrals through all molecular orbitals accounts twice the average HF interactions between every electron pair: A Fockian on the basis of spin orbitals can thus be developed as:

33 Møller – Plesset method that means considering the difference between the quantum exact operator of electron interactions (depending on the sum aver all electron pairs) and the double of the average operator as deduced by the Hartree – Fock theory. Then, after cancelling the one electron term in both the Fockian and the exact Hamiltonian, the perturbation operator remains as: Being the exact Hamiltonian:

34 0 th order Møller – Plesset energy (MP0) The 0 th order equation is obtained after applying such Fockian to the ground state Hartree – Fock determinant wave function: to spin orbitals in the determinant, it can be proven that if  i is the eigenvalue of the i’ s HF molecular orbital of those N all in the I state of the system, then: After applying the previously taken non – interacting Fockian:

35 0 th order Møller – Plesset energy (MP0) The 0 th order equation is obtained after applying such Fockian to the ground state Hartree – Fock determinant wave function: to spin orbitals in the determinant, it can be proven that if  i is the eigenvalue of the i’ s HF molecular orbital of those N all in the I state of the system, then: It must be observed that the total 0 th order energy by the non – interacting Fockian is less exact than the total HF energy because missing the explicit two – electron terms. After applying the previously taken non – interacting Fockian:

36 1 st order Møller – Plesset energy (MP1) We know that for the I ’s Hartree – Fock state: If we consider that the “exact” electron interaction energy could be similar to the corresponding expectation Hartree – Fock’ s value, it becomes as the first order perturbation energy:

37 1 st order Møller – Plesset energy (MP1) Therefore: Observe that the matrix element corrects double counting of electron repulsions after taking HF orbital eigenvalues at the 0 th order.

38 1 st order Møller – Plesset energy (MP1) Therefore: The 1 st order Møller – Plesset perturbative method does not improve Hartree – Fock’s energy of a given I state. Observe that the matrix element corrects double counting of electron repulsions after taking HF orbital eigenvalues at the 0 th order.

39 2 nd order Møller – Plesset energy (MP2) The 2 nd order perturbation contribution to the total energy is taken from the previous Rayleigh – Schrödinger development that implies mixing of 0 th order states (interactions of the given I with other J states):

40 2 nd order Møller – Plesset energy (MP2) Taking I as the ground state of a certain Hartree – Fock solution, then: being J’s some other electronic configurations or “excited” states of the same 0 th Hartree – Fock solution for the ground state.

41 2 nd order Møller – Plesset energy (MP2) A J state could be either a configuration where occupation of orbital i is transferred to the formerly unoccupied orbital a (singly excited) or those where occupation of orbital i is transferred to a together with that of orbital j to orbital b (doubly excited). As the Brillouin theorem (shown when variational methods were explained) discards interactions between singly excited configurations and the ground state, in the case of 2 nd order perturbations: are allowed for excited terms as well as: are disallowed.

42 2 nd order Møller – Plesset energy (MP2) Therefore the second order term substracts the following energy to the Hartree – Fock’s ground state in order to account the correlation energy at the second order:

43 2 nd order Møller – Plesset energy (MP2) Therefore the second order term substracts the following energy to the Hartree – Fock’s ground state in order to account the correlation energy at the second order: After transforming it by directly taking into account spin orbital matrix elements, the MP2 correction is:

44 Higher order Møller – Plesset energies (MPn) Higher order MP terms are being deduced in a similar way. Most programs implement up to MP5 (to the 5 th order).

45 Higher order Møller – Plesset energies (MPn) Higher order MP terms are being deduced in a similar way. Most programs implement up to MP5 (to the 5 th order). MP3 only uses double excitations as well as MP2.

46 Higher order Møller – Plesset energies (MPn) Higher order MP terms are being deduced in a similar way. Most programs implement up to MP5 (to the 5 th order). MP3 only uses double excitations as well as MP2. MP4 and MP5 involve singly (S), double (D), triple (T) and quadruple (Q) excited determinants.

47 Examples Calculated and experimental data of methyl amine* *Distances in Å, angles in degrees, energy in Hartree’s and time in seconds

48 Some remarks Perturbative methods have no clear limits to correct Hartree – Fock’s energies and it could even occur that a truncation (i.e. applying MP2 without MP3) could lead to energies even smaller than the exact, although MP2 alone is generally a very good level for common calculations.

49 Some remarks Perturbative methods have no clear limits to correct Hartree – Fock’s energies and it could even occur that a truncation (i.e. applying MP2 without MP3) could lead to energies even smaller than the exact, although MP2 alone is generally a very good level for common calculations. The main shortcoming is that a low quality Hartree – Fock multilectronic wave function (i.e. a very small atomic basis set) gives larger perturbations and the method’s consistency becomes less trustworthy in such cases.

50 Some remarks It has been considered that results could become erratic when degenerate or quasi degenerate electronic states are involved.

51 Some remarks It has been considered that results could become erratic when degenerate or quasi degenerate electronic states are involved. For open shell molecules, MPn-theory can directly be applied only to unrestricted Hartree–Fock reference functions. However, the resulting energies often suffer from severe spin contamination, leading to very wrong results. A much better alternative is to use one of the MP2-like methods based on restricted open-shell Hartree–Fock references.

52 Some remarks Møller – Plesset (MPn) perturbative methods are the most used ab initio tool to improve Hartree –Fock’s wave functions, energies and resulting optimized geometries.

53 Some remarks Møller – Plesset (MPn) perturbative methods are the most used ab initio tool to improve Hartree –Fock’s wave functions, energies and resulting optimized geometries. This methods are size – consistent. Therefore the resulting energies can be used to compare different structures and molecular compositions, even for thermochemical evaluations.

54 Some remarks Møller – Plesset (MPn) perturbative methods are the most used ab initio tool to improve Hartree –Fock’s wave functions, energies and resulting optimized geometries. This methods are size – consistent. Therefore the resulting energies can be used to compare different structures and molecular compositions, even for thermochemical evaluations. MP2 calculations are estimated to account up to 80 – 90 % of the correlation energy and then cover most chemical problems at a relatively modest cost, being fully a priori originated results.


Download ppt "1 MODELING MATTER AT NANOSCALES 6. The theory of molecular orbitals for the description of nanosystems (part II) 6.06. Perturbational methods for dealing."

Similar presentations


Ads by Google