1. 7/16/01/JW1 Cdma2000 Release 0 New Features/Enhancement

2. 7/16/01/JW2 cdma2000 Release 0 (1) Physical Layer Features: –Support of new radio configurations (Forward Link: RC3, RC4, RC5 and RC6; Reverse Link: RC3 and RC4) –Quick Paging Channel (QPI and CCI) –Forward Fast Power Control (800,400/400, 200/600, EIB ) –Reverse Pilot Channel –QOF –OTD –DCCH Support –SCH Support High Speed Data: –Control Hold Mode (Reverse Pilot Gating) –Reduced SCH Active Set –Mobile Assisted Burst Operation

3. 7/16/01/JW3 cdma2000 Release 0 (2) User Features: –Tiered Service –Answer Holding –User Selective Call Forwarding (Add forwarding to voice mail, pre- stored number in MS) –Support of 5ms frame size –Position Location Support (Geo-Location Info Record)

4. 7/16/01/JW4 cdma2000 Release 0 (3) Other Features: –New Band Class Support (Band Class 2 to 10) –Band Subclass Support –Slotted Timer Support –Retry Feature (Retry Order) –1/8 th R-FCH Gating –Support of 5ms frame size (Support of mini messages) –SDB Support –Release Order (service inactive) on Traffic Channel –GSRM Enhancement (EGSRM) –SCR and NNSCR –Inter-Frequency Hard Handoff Alignment –Idle Handoff Enhancement –Sync Channel Msg modifications –DRS (Data Ready to Send) in Origination Message –LPM (Logical to Physical Mapping)

5. 7/16/01/JW5 Cdma2000 Release A New Features/Enhancement

6. 7/16/01/JW6 cdma2000 Release A (1) Physical Layer Features: –New Common Channel Support (BCCH/FCCCH/REACH/CACH/CPCCH/RCCCH) –Support of Basic Access mode and Reservation Access mode on EACH –Forward Fast Power Control ( QIB, 50/50, and 400/50 bps ) –Auxiliary Pilot Support –Boosting reverse power in frames shortened by inter-frequency hard handoff search –TD Support (STS) –40ms and 80ms frame length for SCH` –Spreading Rate 3 (3X) Traffic Channel –Spreading Rate 3 (3X) Common Channel –3X Forward/1X Reverse on Traffic Channel

7. 7/16/01/JW7 cdma2000 Release A (2) User Features: –Concurrent Service Support –Enhanced Encryption Protocol –Global Emergency Flag in OM –Broadcast SMS on BCCH –ACCT (Access Control based on Call Type) –Position Location Support (Add flag in OM and overhead messages) –WLL support (Device type and hook status) –Multiple Character Sets –Silent Re-origination –Call Waiting Indicator

8. 7/16/01/JW8 cdma2000 Release A (3) Other Features: –Partial Address Comparison –Flexible Rate for FCH/DCCH/SCH –Variable Rate for SCH –Support of 307Kb/S data rate –Store Service Configuration Upon Releasing Channel to allow speedup Service Negotiation (SYNC ID) –Broadcast Indicator on QPCH –Purge service (Resource Release Request Message) –Service Option Grouping Support –QoS Support –Retry Feature for Concurrent Service –Extended Message Length on New Common Channel –TA Timer for EACH/RCCCH –2 SI Bits on new Common Channel –Sync Channel Msg modifications –Obsolete Service Option Negotiation –Short Version of service request to release service option (Resource Release Request Message) –NLM is not required to send for BC0 –ENLM is not required to send for BC1, 3 and 4