1. CS-EE 480 Fall 2006 1September, 2006 University of Portland School of Engineering Project Pilot Rock Stanford’s lighting design Team Ethan Prevost Kristin Glanville Advisor Dr. VanDeGrift Industry Representative Mr. Jonathan Fant

2. CS-EE 480 Fall 2006 2September, 2006 University of Portland School of Engineering Overview Introduction Scorecard Additional Accomplishments Plans Issues/Concerns Conclusions

3. CS-EE 480 Fall 2006 3September, 2006 University of Portland School of Engineering Introduction The project is a lighting design schematic for a Stanfords Restaurant and Bar being built at the Northgate Mall in Seattle, Washington. A 3-dimensional fully enclosed model will be used to demonstrate the lighting. The intensity of the lighting will be presented using the simulator program AGI.

4. CS-EE 480 Fall 2006 4September, 2006 University of Portland School of Engineering Layout of the Restaurant

5. CS-EE 480 Fall 2006 5September, 2006 University of Portland School of Engineering Sample Lighting Layout

6. CS-EE 480 Fall 2006 6September, 2006 University of Portland School of Engineering Scorecard – Previous Plans Buy reference books containing building codes for Sri Lanka. Begin design for a single classroom within one of the buildings.

7. CS-EE 480 Fall 2006 7September, 2006 University of Portland School of Engineering Scorecard – What happened The EWB Sri Lanka professional team decided that they didn’t want to use the layout anymore. We had to chuck the whole project and start over again. We chose to work with Interface Engineering instead.

8. CS-EE 480 Fall 2006 8September, 2006 University of Portland School of Engineering Additional Accomplishments Got a new building drawing, including hard copies and.dwg AutoCAD files. Received the AutoCAD icons for light fixtures that are used by Interface.

9. CS-EE 480 Fall 2006 9September, 2006 University of Portland School of Engineering Plans Visit a Stanfords Restaurant and Bar and take measurements using a light meter. Layout the placement of where we want which type of light fixture. Simulate the lights in AGI making sure that we have the proper light levels. Start calculating and setting up the circuits.

10. CS-EE 480 Fall 2006 10September, 2006 University of Portland School of Engineering Milestones NumberDescriptionOriginal 9/26/06 Previous 9/26/06 Present 11/03/06 1Product Approval10/07/06 11/01/06 2Plan Approval11/10/06 3Layout light fixtures11/17/06 4Connect circuits and make power calculations 11/24/06 5Simulate Lighting Design12/06/06 6Design Release12/08/06 7Architectural Model Built02/16/07 8TOP’s Approval02/23/07 9Light Circuitry added to Model 03/16/07 10Prototype Release04/13/07 11Founder’s Day04/17/07 11Final Report04/23/07

11. CS-EE 480 Fall 2006 11September, 2006 University of Portland School of Engineering Concerns/Issues Being allowed to take measurements in the local Stanfords Restaurant. Having our layout satisfy the Seattle Energy code. Have the circuit be as cost effective as possible

12. CS-EE 480 Fall 2006 12September, 2006 University of Portland School of Engineering Conclusions Had to start a new project, but getting back on track Should hope to have the lighting design done by the end of the semester.