1. Cost-effective Ferrite Chokes and Baluns Web version Click your way through the presentation

2. Ferrite Chokes and Baluns Topics: 1.Why might I need one? 2.What makes a good choke? 3.Three recommended designs

3. Ferrite Chokes and Baluns Topics: 1. Why might I need one? 2. What makes a good choke? 3. Three recommended designs

4. Chokes and baluns: Why might I need one? Q1: What are RF chokes for? A: To stop RF currents from flowing where they aren’t wanted …and so, to help solve EMC problems.

5. Chokes and baluns: Why might I need one? Q1: What are RF chokes for? A: To stop RF currents from flowing where they aren’t wanted. Q2: What are baluns for? A: Er…to make my antenna balanced? Wrong!

6. Chokes and baluns: Why might I need one? Q1: What are RF chokes for? A: To stop RF currents from flowing where they aren’t wanted. Q2: What are baluns for? A: Exactly the same as for Q1: to stop RF currents from flowing where they aren’t wanted.

7. Same as saying… No “common-mode” RF current on feedline Chokes and baluns: Why might I need one? Fields around a balanced dipole: the textbook picture Feedline doesn’t radiate Feedline could be either coax or parallel line Only the antenna radiates WRONG AGAIN Real life isn’t like this!

8. Chokes and baluns: Why might I need one? Reality looks like this… Common-mode RF current on feedline High risk of T V I … or many other kinds of R F I (RF Interference) Feedline radiates Induces RF current on TV downlead

9. 1.The inside of a coaxial cable is private – completely screened from the outside world. 2.At RF, current flows only on surfaces of conductors. 3.The outside surface of the coax shield is a completely separate conductor from the inside surface. 4.The outside surface of the shield is part of the outside world. This is where the common-mode currents flow. Coax basics: Antenna feedpoint Common-mode current flows on outside surface

10. Chokes and baluns: Why might I need one? Common- mode RF current RF earth Mains earth “RF in the Shack” INJECTING RF into the mains Feedline is radiating Another example… Coax-fed dipole

11. Chokes and baluns: Why might I need one? Answer: To block unwanted common-mode currents “RF in the Shack” INJECTING RF into the mains Feedline is radiating

12. Chokes and baluns: Why might I need one? It all starts here: the antenna feedpoint

13. Chokes and baluns: Why might I need one? Common mode choke here Common- mode RF current “RF in the Shack” problems RF into the mains Feedline is radiating

14. Chokes and baluns: Why might I need one? Common mode choke here Another choke here Mains choke More realistically, you may need two or three chokes:

15. Chokes and baluns: Why might I need one? Common mode choke here = “balun” “Feedline choke” “Mains choke” The same chokes, doing the same job Different names for (almost) the same chokes

16. Chokes and baluns: Why might I need one? The same chokes – same ferrite cores, same number of turns, same diameter. Only the cable is different, depending on the application. Because they’re all doing the same job – blocking unwanted common-mode RF current on that particular cable.

17. Summary: To solve EMC problems Specifically… to stop RF currents flowing in the wrong places Chokes may be needed in several different places: at the antenna feedpoint (“a balun”) at other places on coax feedlines on other wiring in the shack (eg computer cables) on mains wiring. The same choke designs will work for a range of applications (only the cable and connectors need to change). Chokes and baluns: Why might I need one?

18. Ferrite Chokes and Baluns Why might I need one? Next: What makes a good choke?

19. Chokes and baluns: What makes a good choke? Remember, this is an EMC problem. Some EMC problems are ‘soft’ and easy to solve – for these, almost any choke will give good results But some problems are much harder – these need chokes with much higher performance The curse of emc is, you never know which it will be… So always aim for overkill – high-performance chokes are far more likely to do the job. The Curse of EMC is that every situation is different.

20. Chokes and baluns: What makes a good choke? What does “high performance” mean? For hard EMC problems, that means… Impedance of several thousand ohms Maintained across a wide bandwidth Impedance must be mainly resistive In any RF choke, high performance = high impedance Why? See the Radcom article.

21. Chokes and baluns: What makes a good choke? Chokes that don’t work well …or may only work for ‘soft’ EMC problems.

22. Chokes and baluns: What makes a good choke? Chokes that don’t work well  Air-wound chokes What’s good: 1.Cheap and easy to make (only needs extra cable) 2.Lightweight What’s bad: 1.Very narrow-band 2.Can easily be detuned in real-life situations.

23. What’s good: 1.Broadband, mainly resistive impedance What’s bad: 1.Usually not enough impedance (needs a large number of large beads of the right type) 2.Very expensive to do properly 3.Very long and heavy. Chokes and baluns: What makes a good choke? Chokes that don’t work well  Strings of ferrite beads

24. Ferrite Chokes and Baluns Why might I need one? What makes a good choke? Next: Three recommended designs

25. Chokes and baluns: Three recommended designs Chokes that do work well Ferrite cores and multiple turns But you MUST: Use a good design Use the specified type of core. Unknown surplus ferrite cores WILL NOT WORK! For good results, use the right ingredients and follow the recipe.

26. Thanks for reading! 73 from Ian GM3SEK