1. Bobcat Drillers Patrick Kirts, Jake Waldrep, Dr. Humboldt Mandell, Tyler Sterling, and Davontae Habbit

2. Davontae Habbit, Patrick Kirts, Tyler Sterling, and Jake Waldrep BOBCAT DRILLERS

3. Product: Mars Drill, designing of anchor mechanism to apply downforce Sponsor: Texas Space Grant Consortium (TSGC), NASA Funding Contact: Dr. Humbolt Mandell, UT- Austin Location 3925 West Braker Lane, Suite 200, Austin Tx, 78759 Details: Development of an easily deployable mechanism to apply downforce on 2014’s drill design. Specifications Capability of applying sufficient force to drill up 20 meters deep Compatibility with existing technology supplied by NASA Design allows for core sample extraction Minimal cost BACKGROUND:

4. MISSION STATEMENT Designing and manufacturing of an easily deployable mechanism that is capable of applying extensive downwards force on the previously designed drill bit, removing the need for relocating the drill on the spacecraft or increasing the overall weight.

5. Need Statements Related to Importance

6. 1.Force Target, Force applied on bit : lbs 2.Electricity, Volts/Watts 3.Strength, psi 4.General Design and dimensions, in 5.Torque, Force, N*m 6.lbs 7.N/A 1.Sufficient Force 2.Uses available power source 3.Withstands drilling force 4.Compatibility 5.Counter drilling force 6.Easily retrieved 7.Simple to use Target Specifications and Metrics SpecificationsMetric

7. Linking Metrics to Needs

8. Gantt Chart Important Dates ●9/11 - Discussion with Mandell ●9/28 - TSGC level I report ●10/6 - Concept Selected ●10/16 - Make Buy Decisions ●10/16 - CAD models ●10/15 - Process management ●10/30 - Begin Fabrication ●11/16 - Final Report and Presentation to TSGC

9. Concept Generation

10. Concept Variants

11. Pugh Chart

12. Concept Selection Matrix

13. Scissor Jack Windows

14. Scissor Jack Critical Customer Needs Met: Applies down force Anchors mechanism Resists torque of drill Functional in elements Uses available power source Simple to Use

15. FMEA (Failure Mode & Effects Analysis)

16. Bill of Materials (BOM)

17. Scissor Jack (Components)

18. Route Sheet

19. OPC (Operation Process Chart)

20. PERT Chart ●Design finalization, processing, OPC, and materials ordering should be ran in parallel to ensure parts arrive in time ●Due to research, concept generation and selection took the longest amount to time. ●Assembly has the shortest duration X # Process Name Duration (days)

21. Manufacturing Process

22. Prototype Testing (FEA) ●Applied 90lb force on lead screw ●Used Von Mises Stress to verify part strength ●Stress seen by lead screw, about 97psi ●Stress seen by links, about 100psi

23. SWOT Analysis

24. Future Considerations and Designs The addition of gear teeth to ensure linkage pairs remain aligned and stabilized throughout linear travel. Identification of elastic material to protect from elements entering the gripper window and electrical input port.

25. Acknowledgements

26. Questions?